Public bug reported:
Binary package hint: acpi-support
My c2d mac mini's wired interface does not up after resume.
Some information:
Release: Hardy up to date 1 of april
acpi-support version: 0.108
[EMAIL PROTECTED]:$ ping 192.168.1.1 [19:12:07]
connect: Network is unreachable
[EMAIL PROTECTED]:$ sudo ifup eth0 [19:12:13]
[sudo] password for peio:
ifup: interface eth0 already configured
[EMAIL PROTECTED]:$ ping 192.168.1.1 [19:12:24]
connect: Network is unreachable
[EMAIL PROTECTED]:$ sudo /etc/init.d/networking restart [19:12:31]
* Reconfiguring network interfaces...
RTNETLINK answers: No such process
SIOCDELRT: No such process
[ OK ]
[EMAIL PROTECTED]:$ ping 192.168.1.1 [19:12:49]
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.23 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1.04 ms
--- 192.168.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 1.043/1.140/1.238/0.103 ms
------------------------------------------------------------------------------
ethernet car info:
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
Gigabit Ethernet Controller (rev 22)
Subsystem: Marvell Technology Group Ltd. Marvell RDK-8053
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 221
Region 0: Memory at 50200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 1000 [size=256]
Expansion ROM at 50500000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
Enable+
Address: 00000000fee0300c Data: 413a
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <256ns, L1 unlimited
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
** Affects: acpi-support (Ubuntu)
Importance: Undecided
Status: New
** Tags: network resume
--
static wired network does not up after resume
https://bugs.launchpad.net/bugs/210347
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
