Update to my message.
RT2500:
With 7.10 and serialmonkey, Rate=54 Mb/s and download reaches 350 KiB/sec.
With 8.04CR, Rate=1 Mb/s and download reaches 20 KiB/sec.
after setting sudo iwconfig wlan0 rate 54M
Rate=54 Mb/s and download reaches 150 KiB/sec.
RT73:
With 8.04CR, Rate=1 Mb/s and download exceeds 350 KiB/sec (up to 450)
Changing the rate produces no download throughput change.
Is it possible to set the rate automatically when the interface starts?
Hoping this will help,
André.
wlan0 RT2500 Wireless ESSID:"xxx"
Mode:Managed Frequency=2.412 GHz Access Point: 00:C0:49:xx:xx:xx
Bit Tx-Power:0 dBm
RTS thr:off Fragment thr:off
Link Quality=62/100 (*) Signal level:-63 dBm Noise level:-82 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
350 KiB/sec
wlan0 IEEE 802.11g ESSID:"xxx"
Mode:Managed Frequency:2.412 GHz Access Point: 00:C0:49:xx:xx:xx
Bit Rate=1 Mb/s Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality=48/100 (*) Signal level=-69 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
20 KiB/sec
wlan0 IEEE 802.11g ESSID:"xxx"
Mode:Managed Frequency:2.412 GHz Access Point: 00:C0:49:xx:xx:xx
Bit Rate=54 Mb/s Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality=69/100 (*) Signal level=-65 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
150 KiB/sec
(*) 20 if the microwave oven is running :-)
--
Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in
Gutsy/Hardy
https://bugs.launchpad.net/bugs/134660
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
