Public bug reported:
Binary package hint: linux-image-2.6.17-10-generic
I've gotten an Addonics SATA->CF adapter model ADSACFB with 512MB of
compact flash memory loaded. I have tried various CF cards lying around
here, but this adapter refuses to load due to an error: ata2: failed to
set xfermode (err_mask=0x1). I have tried plugging this in to various
motherboards, SATA ports but the error is consistent. The dmesg/lspci
output below is about the only information I have to go off, but really
I have no clue why this card doesn't work. I have tried kernels from
kernel.org (2.6.19-rc1 most recently) all experiencing similar issues.
dmesg
------
[ 0.000000] Bootdata ok (command line is
root=UUID=2ad53438-0e1e-4f9e-8101-525785a8aabf ro vga=791)
[ 0.000000] Linux version 2.6.17-10-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Wed Oct 11
20:20:51 UTC 2006 (Ubuntu 2.6.17-10.31-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003eef0000 (usable)
[ 0.000000] BIOS-e820: 000000003eef0000 - 000000003eef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003eef3000 - 000000003ef00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 HP ) @
0x00000000000f8790
[ 0.000000] ACPI: RSDT (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003eef3040
[ 0.000000] ACPI: FADT (v002 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003eef30c0
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @
0x000000003eef6740
[ 0.000000] ACPI: MCFG (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003eef6840
[ 0.000000] ACPI: MADT (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x000000003eef6680
[ 0.000000] ACPI: DSDT (v001 HP AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003eef0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003eef0000
[ 0.000000] On node 0 totalpages: 252804
[ 0.000000] DMA zone: 2592 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 250212 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3ef00000:a1100000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 3b16000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line:
root=UUID=2ad53438-0e1e-4f9e-8101-525785a8aabf ro vga=791
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 0.000000] time.c: Detected 1790.882 MHz processor.
[ 35.206217] Console: colour dummy device 80x25
[ 35.207221] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 35.208752] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 35.224000] Memory: 1002200k/1031104k available (2129k kernel code, 28516k
reserved, 1424k data, 188k init)
[ 35.304056] Calibrating delay using timer specific routine.. 3585.31
BogoMIPS (lpj=7170621)
[ 35.304123] Security Framework v1.0.0 initialized
[ 35.304132] SELinux: Disabled at boot.
[ 35.304157] Mount-cache hash table entries: 256
[ 35.304325] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 35.304330] CPU: L2 Cache: 512K (64 bytes/line)
[ 35.304334] CPU 0/0(1) -> Node 0 -> Core 0
[ 35.304354] SMP alternatives: switching to UP code
[ 35.304700] checking if image is initramfs... it is
[ 35.975311] Freeing initrd memory: 7323k freed
[ 35.982766] ACPI: Core revision 20060707
[ 35.991379] ACPI: Looking for DSDT ... not found!
[ 36.041810] Using local APIC timer interrupts.
[ 36.097584] result 12436689
[ 36.097587] Detected 12.436 MHz APIC timer.
[ 36.099039] Brought up 1 CPUs
[ 36.099076] testing NMI watchdog ... OK.
[ 36.139107] migration_cost=0
[ 36.139374] NET: Registered protocol family 16
[ 36.139403] ACPI: bus type pci registered
[ 36.143580] PCI: Using MMCONFIG at e0000000
[ 36.143628] PCI: No mmconfig possible on device 0:18
[ 36.155980] ACPI: Interpreter enabled
[ 36.155986] ACPI: Using IOAPIC for interrupt routing
[ 36.156601] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 36.156607] PCI: Probing PCI hardware (bus 00)
[ 36.156683] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 36.158474] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[ 36.158759] Boot video device is 0000:01:05.0
[ 36.159260] PCI: Transparent bridge - 0000:00:14.4
[ 36.159300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 36.177612] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 36.177851] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 36.178090] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 36.178326] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 36.178560] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
[ 36.178795] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 36.179035] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 36.179269] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11)
[ 36.179657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 36.182143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 36.182409] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 36.182423] pnp: PnP ACPI init
[ 36.185677] pnp: PnP ACPI: found 14 devices
[ 36.185737] PCI: Using ACPI for IRQ routing
[ 36.185741] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 36.185757] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
[ 36.185893] PCI-DMA: Disabling IOMMU.
[ 36.186459] pnp: 00:01: ioport range 0x228-0x22f has been reserved
[ 36.186465] pnp: 00:01: ioport range 0x40b-0x40b has been reserved
[ 36.186469] pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 36.186474] pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
[ 36.186479] pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
[ 36.186483] pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
[ 36.186488] pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 36.186493] pnp: 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 36.186720] PCI: Bridge: 0000:00:01.0
[ 36.186725] IO window: c000-cfff
[ 36.186730] MEM window: fda00000-fdafffff
[ 36.186734] PREFETCH window: f4000000-fbffffff
[ 36.186739] PCI: Bridge: 0000:00:05.0
[ 36.186743] IO window: d000-dfff
[ 36.186747] MEM window: fde00000-fdefffff
[ 36.186751] PREFETCH window: fdb00000-fdbfffff
[ 36.186756] PCI: Bridge: 0000:00:14.4
[ 36.186761] IO window: b000-bfff
[ 36.186769] MEM window: fdd00000-fddfffff
[ 36.186775] PREFETCH window: fdc00000-fdcfffff
[ 36.186792] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 36.186840] NET: Registered protocol family 2
[ 36.214913] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 36.215230] TCP established hash table entries: 131072 (order: 9, 2097152
bytes)
[ 36.217270] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 36.218332] TCP: Hash tables configured (established 131072 bind 65536)
[ 36.218341] TCP reno registered
[ 36.218787] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp
$
[ 36.219220] audit: initializing netlink socket (disabled)
[ 36.219234] audit(1160730333.020:1): initialized
[ 36.219407] VFS: Disk quotas dquot_6.5.1
[ 36.219435] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 36.219492] Initializing Cryptographic API
[ 36.219498] io scheduler noop registered
[ 36.219506] io scheduler anticipatory registered
[ 36.219515] io scheduler deadline registered
[ 36.219536] io scheduler cfq registered (default)
[ 36.220133] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 36.220138] pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor
BIOS
[ 36.220158] assign_interrupt_mode Found MSI capability
[ 36.220197] Allocate Port Service[0000:00:05.0:pcie00]
[ 36.220234] Allocate Port Service[0000:00:05.0:pcie01]
[ 36.220263] Allocate Port Service[0000:00:05.0:pcie03]
[ 36.243135] Real Time Clock Driver v1.12ac
[ 36.243185] Linux agpgart interface v0.101 (c) Dave Jones
[ 36.243189] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 36.243356] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 36.243982] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 36.244199] mice: PS/2 mouse device common for all mice
[ 36.244784] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 36.245009] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 36.245015] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 36.245297] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 36.797294] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 36.797913] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 36.798175] TCP bic registered
[ 36.798185] NET: Registered protocol family 1
[ 36.798194] NET: Registered protocol family 8
[ 36.798198] NET: Registered protocol family 20
[ 36.799496] ACPI: (supports S0 S3 S4 S5)
[ 36.799547] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 36.799569] Freeing unused kernel memory: 188k freed
[ 36.877676] input: AT Translated Set 2 keyboard as /class/input/input0
[ 36.917664] vesafb: framebuffer at 0xf8000000, mapped to 0xffffc20010100000,
using 3072k, total 16384k
[ 36.917677] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[ 36.917681] vesafb: scrolling: redraw
[ 36.917686] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 37.002952] Console: switching to colour frame buffer device 128x48
[ 37.003457] fb0: VESA VGA frame buffer device
[ 37.012642] Capability LSM initialized
[ 37.043336] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 37.044154] ACPI: Getting cpuindex for acpiid 0x1
[ 37.045500] ACPI: Thermal Zone [THRM] (27 C)
[ 37.447585] SCSI subsystem initialized
[ 37.452438] libata version 1.20 loaded.
[ 37.455952] sata_sil 0000:00:12.0: version 0.9
[ 37.455979] GSI 16 sharing vector 0xC9 and IRQ 16
[ 37.456369] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) ->
IRQ 201
[ 37.457266] ata1: SATA max UDMA/100 cmd 0xFFFFC20000004080 ctl
0xFFFFC2000000408A bmdma 0xFFFFC20000004000 irq 201
[ 37.458126] ata2: SATA max UDMA/100 cmd 0xFFFFC200000040C0 ctl
0xFFFFC200000040CA bmdma 0xFFFFC20000004008 irq 201
[ 37.824626] ata1: SATA link up 1.5 Gbps (SStatus 113)
[ 37.837047] ata1: dev 0 cfg 49:2f00 82:7069 83:7c01 84:4023 85:7068 86:3c01
87:4023 88:203f
[ 37.837052] ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
[ 37.849027] ata1: dev 0 configured for UDMA/100
[ 37.849394] scsi0 : sata_sil
[ 38.272003] ata2: SATA link up 1.5 Gbps (SStatus 113)
[ 38.296409] ata2: dev 0 cfg 49:0200 82:0000 83:0000 84:0000 85:0000 86:0000
87:0000 88:0000
[ 38.296413] ata2: dev 0 ATA-0, max PIO0, 1000944 sectors: LBA
[ 38.297135] ata2: failed to set xfermode (err_mask=0x1)
[ 38.306325] scsi1 : sata_sil
[ 38.315804] Vendor: ATA Model: WDC WD800JD-60LS Rev: 07.0
[ 38.326204] Type: Direct-Access ANSI SCSI revision:
05
[ 38.344398] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 38.355269] sda: Write Protect is off
[ 38.366302] sda: Mode Sense: 00 3a 00 00
[ 38.366332] SCSI device sda: drive cache: write back
[ 38.377785] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 38.389593] sda: Write Protect is off
[ 38.401557] sda: Mode Sense: 00 3a 00 00
[ 38.401572] SCSI device sda: drive cache: write back
[ 38.413935] sda: sda1 sda2 sda3
[ 38.448296] sd 0:0:0:0: Attached scsi disk sda
[ 38.647123] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 38.660450] GSI 17 sharing vector 0xD1 and IRQ 17
[ 38.674022] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) ->
IRQ 209
[ 38.688254] Losing some ticks... checking if CPU frequency changed.
[ 38.689371] ATIIXP: chipset revision 0
[ 38.703750] ATIIXP: not 100% native mode: will probe irqs later
[ 38.718599] ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:pio,
hdb:pio
[ 38.734071] ATIIXP: simplex device: DMA disabled
[ 38.749739] ide1: ATIIXP Bus-Master DMA disabled (BIOS)
[ 38.765686] Probing IDE interface ide0...
[ 39.502692] hda: PIONEER DVD-RW DVR-105, ATAPI CD/DVD-ROM drive
[ 40.305574] hdb: LITE-ON COMBO SOHC-4836K, ATAPI CD/DVD-ROM drive
[ 40.381474] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 40.409596] Probing IDE interface ide1...
[ 40.981049] hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache,
UDMA(33)
[ 40.998856] Uniform CD-ROM driver Revision: 3.20
[ 41.039528] hdb: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(44)
[ 41.132941] Probing IDE interface ide1...
[ 41.210836] usbcore: registered new driver usbfs
[ 41.229293] usbcore: registered new driver hub
[ 41.248802] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[ 41.249361] GSI 18 sharing vector 0xD9 and IRQ 18
[ 41.266855] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) ->
IRQ 217
[ 41.284923] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 41.302736] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[ 41.351755] ohci_hcd 0000:00:13.0: irq 217, io mem 0xfe02e000
[ 41.431800] usb usb1: configuration #1 chosen from 1 choice
[ 41.449225] hub 1-0:1.0: USB hub found
[ 41.466509] hub 1-0:1.0: 4 ports detected
[ 41.591528] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) ->
IRQ 217
[ 41.609384] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 41.627370] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 41.645204] ehci_hcd 0000:00:13.2: irq 217, io mem 0xfe02c000
[ 41.662472] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 41.680626] usb usb2: configuration #1 chosen from 1 choice
[ 41.698086] hub 2-0:1.0: USB hub found
[ 41.715273] hub 2-0:1.0: 8 ports detected
[ 41.856083] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) ->
IRQ 217
[ 41.873806] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 41.891591] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 3
[ 41.938904] ohci_hcd 0000:00:13.1: irq 217, io mem 0xfe02d000
[ 42.018933] usb usb3: configuration #1 chosen from 1 choice
[ 42.036597] hub 3-0:1.0: USB hub found
[ 42.054034] hub 3-0:1.0: 4 ports detected
[ 42.238518] ohci_hcd 0000:00:13.0: wakeup
[ 42.306066] Attempting manual resume
[ 42.355926] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[ 42.677863] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 42.909616] usb 3-2: configuration #1 chosen from 1 choice
[ 43.233092] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 43.468915] usb 1-1: configuration #1 chosen from 1 choice
[ 43.487116] usbcore: registered new driver hiddev
[ 43.510937] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as
/class/input/input1
[ 43.528745] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse
with IntelliEye(TM)] on usb-0000:00:13.1-2
[ 43.554923] input: CHICONY HP Basic USB Keyboard as /class/input/input2
[ 43.573029] input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on
usb-0000:00:13.0-1
[ 43.591336] usbcore: registered new driver usbhid
[ 43.609642] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 45.866558] ReiserFS: sda3: using ordered data mode
[ 45.908777] ReiserFS: sda3: journal params: device sda3, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 45.948699] ReiserFS: sda3: checking transaction log (sda3)
[ 46.029688] ReiserFS: sda3: Using r5 hash to sort names
[ 60.437671] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 60.456490] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 60.866300] input: PC Speaker as /class/input/input3
[ 60.884424] Linux video capture interface: v1.00
[ 61.203421] tg3.c:v3.59.1 (August 25, 2006)
[ 61.220721] GSI 19 sharing vector 0xE1 and IRQ 19
[ 61.238106] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) ->
IRQ 225
[ 61.258024] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 61.259162] FDC 0 is a post-1991 82077
[ 61.283053] eth0: Tigon3 [partno(BCM95751) rev 4200 PHY(5750)] (PCI Express)
10/100/1000BaseT Ethernet 00:13:d3:f7:e8:9b
[ 61.301433] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0]
WireSpeed[1] TSOcap[1]
[ 61.319848] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 61.501585] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) ->
IRQ 225
[ 61.537866] parport: PnPBIOS parport detected.
[ 61.556687] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 61.777704] bttv: driver version 0.9.16 loaded
[ 61.796993] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 61.816720] bttv: Bt8xx card found (0).
[ 61.836168] GSI 20 sharing vector 0xE9 and IRQ 20
[ 61.855702] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 20 (level, low) ->
IRQ 233
[ 61.875441] bttv0: Bt878 (rev 17) at 0000:03:0a.0, irq: 233, latency: 64,
mmio: 0xfdcff000
[ 61.895284] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 61.915146] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 61.919486] tveeprom 0-0050: Huh, no eeprom present (err=-121)?
[ 61.939310] bttv0: using tuner=-1
[ 61.958904] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 61.981779] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 62.003269] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 62.024135] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[ 62.044457] bttv0: registered device video0
[ 62.062248] bttv0: registered device vbi0
[ 62.152383] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 62.275928] ts: Compaq touchscreen protocol output
[ 62.310731] bt878: AUDIO driver version 0.0.0 loaded
[ 62.327686] bt878: Bt878 AUDIO function found (0).
[ 62.344079] ACPI: PCI Interrupt 0000:03:0a.1[A] -> GSI 20 (level, low) ->
IRQ 233
[ 62.360758] bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions.
[ 62.377570] bt878(0): Bt878 (rev 17) at 03:0a.1, irq: 233, latency: 64,
memory: 0xfdcfe000
[ 62.532437] PM: Writing back config space on device 0000:02:00.0 at offset 1
(was 100406, writing 100006)
[ 62.652110] lp0: using parport0 (interrupt-driven).
[ 62.797822] Adding 1951888k swap on
/dev/disk/by-uuid/a1f096d4-f3bc-48f9-9824-853baaf5f8bb. Priority:-1 extents:1
across:1951888k
[ 63.675937] NET: Registered protocol family 17
[ 64.188857] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 64.188861] tg3: eth0: Flow control is on for TX and on for RX.
[ 68.642335] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 68.642339] md: bitmap version 4.39
[ 68.816538] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL
PROTECTED]
[ 70.415012] NET: Registered protocol family 10
[ 70.415128] lo: Disabled Privacy Extensions
[ 70.415266] IPv6 over IPv4 tunneling driver
[ 81.008705] eth0: no IPv6 routers present
[ 89.301535] pcc_acpi: loading...
[ 89.312477] ACPI: Power Button (FF) [PWRF]
[ 89.312488] ACPI: Power Button (CM) [PWRB]
[ 89.347205] ibm_acpi: ec object not found
[ 89.613979] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version
1.60.2)
[ 89.614015] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
[ 89.614019] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[ 89.614024] cpu_init done, current fid 0xa, vid 0x6
[ 100.731164] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 102.022765] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 102.040767] NFSD: starting 90-second grace period
[ 104.321286] Bluetooth: Core ver 2.8
[ 104.321290] NET: Registered protocol family 31
[ 104.321293] Bluetooth: HCI device and connection manager initialized
[ 104.321305] Bluetooth: HCI socket layer initialized
[ 104.349997] Bluetooth: L2CAP ver 2.8
[ 104.350000] Bluetooth: L2CAP socket layer initialized
[ 104.360940] Bluetooth: RFCOMM socket layer initialized
[ 104.360956] Bluetooth: RFCOMM TTY layer initialized
[ 104.360958] Bluetooth: RFCOMM ver 1.7
[ 105.491849] vmmon: module license 'unspecified' taints kernel.
[ 105.496131] /dev/vmmon[6204]: Module vmmon: registered with major=10
minor=165
[ 105.496383] /dev/vmmon[6204]: Module vmmon: initialized
[ 106.109040] /dev/vmnet: open called by PID 6230 (vmnet-bridge)
[ 106.109271] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 106.109446] /dev/vmnet: port on hub 0 successfully opened
[ 106.109612] bridge-eth0: enabling the bridge
[ 106.109759] bridge-eth0: up
[ 106.109885] bridge-eth0: already up
[ 106.110021] bridge-eth0: attached
[ 106.255396] /dev/vmnet: open called by PID 6244 (vmnet-natd)
[ 106.255628] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 106.255802] /dev/vmnet: port on hub 8 successfully opened
[ 106.311461] /dev/vmnet: open called by PID 6250 (vmnet-netifup)
[ 106.311702] /dev/vmnet: port on hub 8 successfully opened
[ 106.316167] /dev/vmnet: open called by PID 6251 (vmnet-netifup)
[ 106.316441] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 106.316623] /dev/vmnet: port on hub 1 successfully opened
[ 106.573345] /dev/vmnet: open called by PID 6269 (vmnet-dhcpd)
[ 106.573536] /dev/vmnet: port on hub 8 successfully opened
[ 106.574382] /dev/vmnet: open called by PID 6277 (vmnet-dhcpd)
[ 106.574564] /dev/vmnet: port on hub 1 successfully opened
[ 108.358766] eth0: no IPv6 routers present
[ 111.900512] vmnet8: no IPv6 routers present
[ 112.078043] vmnet1: no IPv6 routers present
------
lspci
-----
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000f4000000-00000000fbf00000
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37 (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdb00000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller
(prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 201
Region 0: I/O ports at fc00 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f400 [size=8]
Region 3: I/O ports at f000 [size=4]
Region 4: I/O ports at ec00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 40000000 [disabled] [size=512K]
Capabilities: <access denied>
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
(prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 217
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
(prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 217
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
(prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 217
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10)
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 0500 [size=16]
Region 1: Memory at fe02b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE
Controller ATI (prog-if 82 [Master PriP])
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 209
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at e400 [size=16]
Capabilities: <access denied>
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: fdc00000-fdcfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio
Controller (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 225
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Capabilities: <access denied>
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpress
200G Series] (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at cc00 [size=256]
Region 2: Memory at fdaf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: <access denied>
01:05.1 Display controller: ATI Technologies Inc Unknown device 5854
Subsystem: Hewlett-Packard Company Unknown device 3008
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at f4000000 (32-bit, prefetchable) [disabled]
[size=64M]
Region 1: Memory at fdae0000 (32-bit, non-prefetchable) [disabled]
[size=64K]
Capabilities: <access denied>
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit
Ethernet PCI Express (rev 20)
Subsystem: Hewlett-Packard Company Unknown device 3009
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at fdef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture
(rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 233
Region 0: Memory at fdcff000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
03:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 233
Region 0: Memory at fdcfe000 (32-bit, prefetchable) [size=4K]
Capabilities: <access denied>
-----
** Affects: linux-source-2.6.17 (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
SATA Compact Flash (CF) Adapter will not load
https://launchpad.net/bugs/65807
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
