Public bug reported:
Hello,
I installed kubuntu from CD on PC. There is no dhcp-server in the net.
Therefore, after installation I use K->SystemSettings-> NetworkSettings
to set an IP for the network interface eth0.
Before I do this the first lines of /etc/hosts looks like
127.0.0.1 localhost
127.0.1.1 mychosenhostname
After using kcm_knetworkconfmodule the first line is changed to
127.0.0.1 localhost mychosenhostname
This is very bad as it causes hplip to not work. The symptom is the
following error message at boot time: "hpiod: Rejected connection from
192.168.0.4"
In order to make hplip work properly I had to revert the change in the first
line of /etc/hosts and add a line
192.168.0.4 mychosenhostname
A very bad thing as the malfunction of hplip not only
does not detect any printers, but any scanning application hangs indefinitely
as it tries to contact hplip.
Solving this problem required a lot of system knowledge on my side, not
available to any ordinary user. So a severe quality problem.
Installation cds need to be fixed because when you upgrade to a fixed
knetworkconf later it is too late.
** Affects: knetworkconf (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
kcm_knetworkconfmodule adds hostname to 127.0.0.1 line
https://launchpad.net/bugs/66813
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
