Public bug reported:
We've recentrly upgraded our server from Ubuntu 7.10 to 8.04. Everything
fine except for a problem during boot as the new kernel does not
recognize second disk on the primary ide channel. Currently i've built
the kernel 2.6.25 using congiguration from ubuntu 7.10 and everything
works fine again!
Note that our server uses a duplidisk ide raid module that worked fine
since Ubuntu 6.10
Here it's dmesg error during boot:
[ 67.680954] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd400 irq 14
[ 67.681007] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd408 irq 15
[ 67.731258] Floppy drive(s): fd0 is 1.44M
[ 67.753937] FDC 0 is a post-1991 82077
[ 67.896350] ata1.00: ATA-7: DupliDisk IDE RAID-1 Adapter( 3.37), 00.07H00,
max UDMA/100
[ 67.896419] ata1.00: 312581808 sectors, multi 16: LBA48
[ 68.488807] Marking TSC unstable due to: TSC halts in idle.
[ 68.488876] Time: acpi_pm clocksource has been installed.
[ 69.990000] ata1.01: failed to set max address (err_mask=0x1)
[ 69.990060] ata1.01: device aborted resize (234441648 -> 312581808),
skipping HPA handling
[ 69.990124] ata1.01: ATA-6: DupliDisk IDE RAID-1 Adapter( 3.37), 08.02D08,
max UDMA/100
[ 69.990182] ata1.01: 234441648 sectors, multi 16: LBA48
[ 69.990244] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 70.027473] ata1.00: configured for UDMA/33
[ 70.066457] ata1.01: n_sectors mismatch 234441648 != 312581807
[ 70.066514] ata1.01: revalidation failed (errno=-19)
[ 70.066565] ata1.01: limiting speed to UDMA/100:PIO3
[ 70.066613] ata1: failed to recover some devices, retrying in 5 secs
[ 75.247984] ata1.01: n_sectors mismatch 234441648 != 312581807
[ 75.248042] ata1.01: revalidation failed (errno=-19)
[ 75.248091] ata1.01: disabled
[ 75.817871] ata1.00: configured for UDMA/33
[ 76.156466] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33
[ 76.356011] ata2.00: configured for UDMA/33
[ 76.356215] scsi 0:0:0:0: Direct-Access ATA DupliDisk IDE RA 00.0
PQ: 0 ANSI: 5
[ 76.363440] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0015
PQ: 0 ANSI: 5
and more
[ 76.602561] Driver 'sd' needs updating - please use bus_type methods
[ 76.602727] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 76.602792] sd 0:0:0:0: [sda] Write Protect is off
[ 76.602841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 76.602860] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 76.602972] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 76.603031] sd 0:0:0:0: [sda] Write Protect is off
[ 76.603079] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 76.603096] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 76.603157] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use
bus_type methods
[ 76.617612] sda5 sda6 sda7 sda8 >
[ 76.662926] sd 0:0:0:0: [sda] Attached SCSI disk
[ 76.669804] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 76.669882] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 76.693850] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
[ 76.693912] Uniform CD-ROM driver Revision: 3.20
[ 76.694030] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 77.278167] Attempting manual resume
[ 77.278217] swsusp: Resume From Partition 8:8
[ 77.278219] PM: Checking swsusp image.
[ 77.278966] PM: Resume from disk failed.
** Affects: ubuntu
Importance: Undecided
Status: New
** Tags: disk ide kernel revalidation
--
Ubuntu 8.04 error on 2nd disk on an old IDE machine - revalidation failde
https://bugs.launchpad.net/bugs/236705
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
