** Attachment added: "output of sudo lspci -vvnn" http://launchpadlibrarian.net/15106197/lspci-vvnn
** Description changed: I am pretty much a linux newbee.. firstly thanks to anyone who reads and offers help for me to find a fix, but please also try to fully explain what you need me to post and how, as many of the reports I've read in an effort to find a fix myself, have simply been 'too technical' and I've found it hard to take some practical advice from them that I feel safe to apply to my own PC.. but thanks mainly! This is my first even linux install, and I have made many small alterations to get it working in a way that I was enjoying, however over the last few days the mouse has started to fail - to the point that it now occasionally shuffles around when I push it.. but it is just an annoyance, luckily I have the touchpad, which works fine at all times. - I have made some changes to my USB settings to make my huawei 200 work + I have made some changes to my USB settings to make my huawei E200 work to provide internet without needing to connect each time - I also played - around with other things, too many to list - I really hope someone can + around with other things, too many to list or remember, and many via the + terminal, where I am not at all proficient - I really hope someone can point me to where to start fixing things.. anyhow.. to the bug.. I've read endless reports and forums, and tried a few of the suggestions, none have done it yet.. I've also monitored the output of the following: the mouse is branded Manhattan 173773 - it's a generic mouse with a scroll, which I bought in Spain connected via USB with a cable. dmesg | tail [ 333.706316] usb 4-1: new low speed USB device using uhci_hcd and address 15 [ 333.709828] usb 4-1: configuration #1 chosen from 1 choice [ 333.734237] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input50 [ 333.764571] input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.3-1 [ 334.632368] usb 4-1: USB disconnect, address 15 [ 334.678804] usb 4-1: new low speed USB device using uhci_hcd and address 16 [ 334.682205] usb 4-1: configuration #1 chosen from 1 choice [ 334.732607] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input51 [ 143.251018] input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.3-1 [ 335.322348] usb 4-1: USB disconnect, address 16 top - attached below ( but oddly shows that I'm using nearly 60% of my RAM, while my System Monitor say only 25%..? ) lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 005 Device 014: ID 07ab:fc86 Freecom Technologies Bus 005 Device 001: ID 0000:0000 not sure what else I can include, anyone got an ideas. I'm using Kernel: Ubuntu 2.6.24-18.32-generic my PC is a Dell inspiron 6000 - 1GB Ram - has an ATI 200 (?) video card and a touchpad built-in mousepad. uname - a gives: Linux loveunit 2.6.24-18-generic #1 SMP Wed May 28 20:27:26 UTC 2008 i686 GNU/Linux I'll also attach the following below. /var/log/syslog lspci-vvnn ** Description changed: I am pretty much a linux newbee.. firstly thanks to anyone who reads and offers help for me to find a fix, but please also try to fully explain what you need me to post and how, as many of the reports I've read in an effort to find a fix myself, have simply been 'too technical' and I've found it hard to take some practical advice from them that I feel safe to apply to my own PC.. but thanks mainly! This is my first even linux install, and I have made many small alterations to get it working in a way that I was enjoying, however over the last few days the mouse has started to fail - to the point that it now occasionally shuffles around when I push it.. but it is just an annoyance, luckily I have the touchpad, which works fine at all times. + I thought this might be a problem after suspending the computer, and + often a reboot helped, but now after a fresh boot the Mouse freezes, + might come back for a few minutes and then just does nothing - but + remains lit, so has power. + I have made some changes to my USB settings to make my huawei E200 work to provide internet without needing to connect each time - I also played around with other things, too many to list or remember, and many via the terminal, where I am not at all proficient - I really hope someone can point me to where to start fixing things.. + the mouse is branded Manhattan 173773 - it's a generic mouse with a + scroll, which I bought in Spain connected via USB with a cable. + anyhow.. to the bug.. I've read endless reports and forums, and tried a few of the suggestions, none have done it yet.. I've also monitored the output of the following: - - the mouse is branded Manhattan 173773 - it's a generic mouse with a - scroll, which I bought in Spain connected via USB with a cable. dmesg | tail [ 333.706316] usb 4-1: new low speed USB device using uhci_hcd and address 15 [ 333.709828] usb 4-1: configuration #1 chosen from 1 choice [ 333.734237] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input50 [ 333.764571] input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.3-1 [ 334.632368] usb 4-1: USB disconnect, address 15 [ 334.678804] usb 4-1: new low speed USB device using uhci_hcd and address 16 [ 334.682205] usb 4-1: configuration #1 chosen from 1 choice [ 334.732607] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input51 [ 143.251018] input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.3-1 [ 335.322348] usb 4-1: USB disconnect, address 16 top - attached below ( but oddly shows that I'm using nearly 60% of my RAM, while my System Monitor say only 25%..? ) lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 005 Device 014: ID 07ab:fc86 Freecom Technologies Bus 005 Device 001: ID 0000:0000 not sure what else I can include, anyone got an ideas. I'm using Kernel: Ubuntu 2.6.24-18.32-generic my PC is a Dell inspiron 6000 - 1GB Ram - has an ATI 200 (?) video card and a touchpad built-in mousepad. uname - a gives: Linux loveunit 2.6.24-18-generic #1 SMP Wed May 28 20:27:26 UTC 2008 i686 GNU/Linux I'll also attach the following below. /var/log/syslog lspci-vvnn -- USB mouse freezes and becomes 'jittery' https://bugs.launchpad.net/bugs/238110 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
