** Summary changed: - xsane takes my TV card for a scanner + xsane should not detect TV cards
** Description changed: - Binary package hint: xsane + xsane detects tv cards, even though they are not scanners, and cannot be + used for scanning. - And so I can't configure my true scanner + An example of my setup: + v4l:/dev/video0 + plustek:libusb:005:002 - lspci gives : - --- - 00:06.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) - 00:06.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) - 00:06.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) - 00:06.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) - --- + Perhaps all that is required is for v4l or /dev/video devices to be + ignored? - $ lsusb -s 003:002 -v - - Bus 003 Device 002: ID 055f:0408 Mustek Systems, Inc. - Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 2.00 - bDeviceClass 0 (Defined at Interface level) - bDeviceSubClass 0 - bDeviceProtocol 0 - bMaxPacketSize0 64 - idVendor 0x055f Mustek Systems, Inc. - idProduct 0x0408 - bcdDevice 1.00 - iManufacturer 1 Hewlett-Packard. - iProduct 2 USB2.0 Scanner - iSerial 0 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 39 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 0 - bmAttributes 0xc0 - Self Powered - MaxPower 100mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 3 - bInterfaceClass 255 Vendor Specific Class - bInterfaceSubClass 255 Vendor Specific Subclass - bInterfaceProtocol 255 Vendor Specific Protocol - iInterface 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x01 EP 1 OUT - bmAttributes 2 - Transfer Type Bulk - Synch Type None - Usage Type Data - wMaxPacketSize 0x0200 1x 512 bytes - bInterval 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x82 EP 2 IN - bmAttributes 2 - Transfer Type Bulk - Synch Type None - Usage Type Data - wMaxPacketSize 0x0200 1x 512 bytes - bInterval 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x83 EP 3 IN - bmAttributes 3 - Transfer Type Interrupt - Synch Type None - Usage Type Data - wMaxPacketSize 0x0001 1x 1 bytes - bInterval 3 - Device Qualifier (for other device speed): - bLength 10 - bDescriptorType 6 - bcdUSB 2.00 - bDeviceClass 0 (Defined at Interface level) - bDeviceSubClass 0 - bDeviceProtocol 0 - bMaxPacketSize0 64 - bNumConfigurations 1 - Device Status: 0x0001 - Self Powered - - ProblemType: Bug - Date: Fri Feb 23 13:44:08 2007 - DistroRelease: Ubuntu 7.04 - Uname: Linux Ouattazoum 2.6.20-8-generic #2 SMP Tue Feb 13 05:18:42 UTC 2007 i686 GNU/Linux + xsane 0.995-1ubuntu1 in Ubuntu Hardy. ** Changed in: xsane (Ubuntu) Importance: Medium => Low -- xsane should not detect TV cards https://bugs.launchpad.net/bugs/87312 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
