Public bug reported:
For dapper:
Fresh install of Dapper. Connect Epson CX5400 to machine, boot machine. Start
Xsane Image Scanner. Hit scan, works.
For Edgy:
Install Edgy. Boot with CX5400 connected. Start Xsane. No device detected.
Troubleshooting:
Dapper:
[EMAIL PROTECTED]:~$ scanimage -L
device `epson:libusb:002:002' is a Epson Unknown model flatbed scanner
[EMAIL PROTECTED]:~$ cat /proc/bus/usb/devices
...
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b8 ProdID=0808 Rev= 1.00
S: Manufacturer=EPSON
S: Product=USB MFP
S: SerialNumber=HL0110405102309470
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
---
For Edgy:
[EMAIL PROTECTED]:/home/nick# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[EMAIL PROTECTED]:/home/nick# sane-find-scanner
....
found USB scanner (vendor=0x04b8 [EPSON], product=0x0808 [USB MFP]) at
libusb:002:002
....
[EMAIL PROTECTED]:/home/nick# cat /proc/bus/usb/devices
....
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b8 ProdID=0808 Rev= 1.00
S: Manufacturer=EPSON
S: Product=USB MFP
S: SerialNumber=HL0110405102309470
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
....
** Affects: sane-backends (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
Epson CX5400 not detected in Edgy. Works in Dapper.
https://launchpad.net/bugs/67659
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
