I'm preparing the latest package for 2.6.24-19 right now and a patch for the linux ubuntu modules package that this issue will be fixed in future...
Markus On Tue, Jul 1, 2008 at 8:58 PM, veerstaad <[EMAIL PROTECTED]> wrote: > Hi, > > device: MSI DigiVOX A/D II > > Problems: > > 1. Ubuntu cannot boot if the USB Stick is plugged in. > > 2. If using TVtime, me-tv i get the following message: > No video source. > No signal. > No such file or directory. > Cannot open capture device /dev/video0. > No tuner device. > > 3. em28xx-dvb isnt loaded when plugging in. But "sudo modprobe em28xx- > dvb" works before plugging in. > > 4. The terminal freezes (Stick plugged in) if typing "lsusb" and "sudo > modprobe em28xx-dvb" > > > dmesg > > [ 7564.105123] usb 7-1: new high speed USB device using ehci_hcd and address > 10 > [ 7564.261160] usb 7-1: configuration #1 chosen from 1 choice > [ 7564.977962] Linux video capture interface: v2.00 > [ 7565.142030] em28xx v4l2 driver version 0.0.1 loaded > [ 7565.142103] em28xx new video device (eb1a:e323): interface 0, class 255 > [ 7565.142110] em28xx: device is attached to a USB 2.0 bus > [ 7565.142115] em28xx: you're using the experimental/unstable tree from > mcentral.de > [ 7565.142120] em28xx: there's also a stable tree available but which is > limited to > [ 7565.142125] em28xx: linux <=2.6.19.2 > [ 7565.142129] em28xx: it's fine to use this driver but keep in mind that it > will move > [ 7565.142134] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon > as it's > [ 7565.142139] em28xx: proved to be stable > [ 7565.142145] em28xx #0: Alternate settings: 8 > [ 7565.142150] em28xx #0: Alternate setting 0, max size= 0 > [ 7565.142155] em28xx #0: Alternate setting 1, max size= 0 > [ 7565.142160] em28xx #0: Alternate setting 2, max size= 1448 > [ 7565.142165] em28xx #0: Alternate setting 3, max size= 2048 > [ 7565.142170] em28xx #0: Alternate setting 4, max size= 2304 > [ 7565.142174] em28xx #0: Alternate setting 5, max size= 2580 > [ 7565.142179] em28xx #0: Alternate setting 6, max size= 2892 > [ 7565.142184] em28xx #0: Alternate setting 7, max size= 3072 > [ 7565.333941] attach_inform: eeprom detected. > [ 7565.360643] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 23 e3 d0 12 5c 00 > 6a 22 00 00 > [ 7565.360658] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 01 00 00 00 00 00 > 00 00 00 00 > [ 7565.360668] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 > 5b 1e 00 00 > [ 7565.360678] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 > 00 00 00 00 > [ 7565.360688] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360698] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360710] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 > 55 00 53 00 > [ 7565.360722] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 33 00 > 20 00 44 00 > [ 7565.360734] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 > 00 00 00 00 > [ 7565.360746] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360758] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360770] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360782] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360794] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360806] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360818] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 7565.360829] EEPROM ID= 0x9567eb1a > [ 7565.360832] Vendor/Product ID= eb1a:e323 > [ 7565.360834] AC97 audio (5 sample rates) > [ 7565.360836] 500mA max power > [ 7565.360838] Table at 0x04, strings=0x226a, 0x0000, 0x0000 > [ 7565.363131] tuner 0-0061: chip found @ 0xc2 (em28xx #0) > [ 7565.363164] attach inform (default): detected I2C address c2 > [ 7565.363170] tuner 0x61: Configuration acknowledged > [ 7565.363216] /home/veerstaad/v4l-dvb-experimental/v4l/xc3028-tuner.c: > attach request! > [ 7565.363243] BUG: unable to handle kernel paging request at virtual address > 726f66a2 > [ 7565.363248] printing eip: f8fafcfa *pde = 00000000 > [ 7565.363254] Oops: 0002 [#1] SMP > [ 7565.363258] Modules linked in: xc3028_tuner tvp5150 tuner em28xx > compat_ioctl32 ir_common videodev v4l2_common v4l1_compat tveeprom i2c_core > nls_iso8859_1 nls_cp437 vfat fat wlan_wep i915 drm binfmt_misc af_packet > rfcomm l2cap bluetooth ipv6 ppdev acpi_cpufreq cpufreq_powersave > cpufreq_ondemand cpufreq_stats freq_table cpufreq_conservative > cpufreq_userspace sbs sbshc container dock iptable_filter ip_tables x_tables > wlan_scan_sta ath_rate_sample ath_pci wlan ath_hal(P) parport_pc lp parport > joydev snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc > snd_hwdep snd_seq_dummy sr_mod cdrom snd_seq_oss snd_seq_midi snd_rawmidi > snd_seq_midi_event ndiswrapper snd_seq snd_timer snd_seq_device pata_acpi > battery serio_raw snd button acer_acpi led_class video output iTCO_wdt > iTCO_vendor_support ac intel_agp shpchp pci_hotplug soundcore evdev wmi_acer > agpgart pcspkr psmouse ext3 jbd mbcache ata_generic sg sd_mod usb_storage > libusual usbhid hid ata_piix ahci libata scsi_mod tg3 ehci_hcd uhci_hcd > usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse > [ 7565.363362] > [ 7565.363365] Pid: 9328, comm: modprobe Tainted: P (2.6.24-19-generic > #1) > [ 7565.363368] EIP: 0060:[<f8fafcfa>] EFLAGS: 00010202 CPU: 0 > [ 7565.363375] EIP is at xc3028_attach+0x4a/0x170 [xc3028_tuner] > [ 7565.363378] EAX: 726f666e EBX: d1942700 ECX: 00000046 EDX: 00000000 > [ 7565.363381] ESI: 726f666e EDI: f912e05c EBP: f6aed06c ESP: d1a6f79c > [ 7565.363384] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 > [ 7565.363387] Process modprobe (pid: 9328, ti=d1a6e000 task=d187c000 > task.ti=d1a6e000) > [ 7565.363390] Stack: f8fb0073 f8fb0540 c7c53c00 f912e05c c7c53c00 d1942700 > f913adea 00000000 > [ 7565.363398] c7c53c00 c7c53c00 f6aed06c 00000000 f8f24fa7 c7c53cbc > 00000014 f8f26622 > [ 7565.363406] 0000000e 00000047 f8fafcb0 f6aed09c c7c53c00 00000000 > 00000000 f6aed06c > [ 7565.363415] Call Trace: > [ 7565.363426] [<f913adea>] set_type+0x26a/0x400 [tuner] > [ 7565.363441] [<f8f24fa7>] i2c_attach_client+0xf7/0x1b0 [i2c_core] > [ 7565.363457] [<f8fafcb0>] xc3028_attach+0x0/0x170 [xc3028_tuner] > [ 7565.363466] [<f913b389>] tuner_attach+0x189/0x320 [tuner] > [ 7565.363485] [<f8f24a7b>] i2c_probe_address+0x5b/0x150 [i2c_core] > [ 7565.363498] [<c027fd6e>] get_device+0xe/0x20 > [ 7565.363509] [<f8f25c5b>] i2c_probe+0x1fb/0x210 [i2c_core] > [ 7565.363517] [<f913b200>] tuner_attach+0x0/0x320 [tuner] > [ 7565.363532] [<f913b200>] tuner_attach+0x0/0x320 [tuner] > [ 7565.363546] [<f9128cf0>] em28xx_write_regs+0x0/0x20 [em28xx] > [ 7565.363560] [<f8f2530f>] i2c_register_adapter+0xef/0x1e0 [i2c_core] > [ 7565.363577] [<f8f2554f>] i2c_add_adapter+0x7f/0x90 [i2c_core] > [ 7565.363590] [<f91273b1>] em28xx_i2c_register+0x81/0x120 [em28xx] > [ 7565.363600] [<f9128d0b>] em28xx_write_regs+0x1b/0x20 [em28xx] > [ 7565.363615] [<f9127b5a>] em28xx_card_setup+0x4a/0xb90 [em28xx] > [ 7565.363629] [<f9122a98>] em28xx_init_dev+0x168/0x7c0 [em28xx] > [ 7565.363648] [<f912366c>] em28xx_usb_probe+0x36c/0x1a10 [em28xx] > [ 7565.363674] [<c010336e>] __switch_to+0x9e/0x150 > [ 7565.363684] [<c031a9ea>] schedule+0x20a/0x600 > [ 7565.363708] [<c0207dc3>] blk_recount_segments+0x33/0x70 > [ 7565.363713] [<c02132c0>] cfq_set_request+0x0/0x310 > [ 7565.363721] [<c0213393>] cfq_set_request+0xd3/0x310 > [ 7565.363738] [<c0212540>] cfq_add_rq_rb+0x50/0x80 > [ 7565.363745] [<c021259a>] cfq_insert_request+0x2a/0x3d0 > [ 7565.363762] [<c0170574>] mempool_alloc+0x34/0xf0 > [ 7565.363771] [<c0170574>] mempool_alloc+0x34/0xf0 > [ 7565.363775] [<c0170574>] mempool_alloc+0x34/0xf0 > [ 7565.363791] [<f8946065>] scsi_init_io+0x55/0xe0 [scsi_mod] > [ 7565.363823] [<f8945b1a>] scsi_get_cmd_from_req+0x2a/0x40 [scsi_mod] > [ 7565.363851] [<f88a0a6f>] ahci_qc_prep+0x4f/0x180 [ahci] > [ 7565.363865] [<c0214462>] __next_cpu+0x12/0x20 > [ 7565.363870] [<c0122cb4>] find_busiest_group+0x1c4/0x780 > [ 7565.363895] [<c010336e>] __switch_to+0x9e/0x150 > [ 7565.363904] [<c031a9ea>] schedule+0x20a/0x600 > [ 7565.363922] [<c031b1eb>] __wait_on_bit_lock+0x5b/0x70 > [ 7565.363927] [<c016d890>] sync_page+0x0/0x40 > [ 7565.363940] [<c021493c>] idr_get_empty_slot+0xec/0x280 > [ 7565.363953] [<c0214b4d>] ida_get_new_above+0x7d/0x180 > [ 7565.363961] [<c01a5201>] find_inode+0x31/0x60 > [ 7565.363966] [<c01d7050>] sysfs_ilookup_test+0x0/0x10 > [ 7565.363977] [<c01a50b5>] iput+0x35/0x70 > [ 7565.363982] [<c01d770b>] sysfs_addrm_finish+0x4b/0x1c0 > [ 7565.363990] [<c01d73f4>] sysfs_add_one+0x44/0xe0 > [ 7565.363997] [<c01d74fd>] sysfs_addrm_start+0x6d/0xb0 > [ 7565.364003] [<c031b3a8>] mutex_lock+0x8/0x20 > [ 7565.364010] [<f88b482b>] usb_autopm_do_device+0x7b/0x100 [usbcore] > [ 7565.364040] [<f88b4397>] usb_match_one_id+0x27/0xb0 [usbcore] > [ 7565.364071] [<f88b55d9>] usb_probe_interface+0xb9/0x140 [usbcore] > [ 7565.364102] [<c0282818>] driver_probe_device+0x88/0x190 > [ 7565.364108] [<c0215ea0>] kobject_uevent_env+0xf0/0x3d0 > [ 7565.364120] [<c0282a8e>] __driver_attach+0x9e/0xa0 > [ 7565.364128] [<c0281c4b>] bus_for_each_dev+0x3b/0x60 > [ 7565.364138] [<c0282696>] driver_attach+0x16/0x20 > [ 7565.364142] [<c02829f0>] __driver_attach+0x0/0xa0 > [ 7565.364147] [<c0281fca>] bus_add_driver+0x8a/0x1e0 > [ 7565.364157] [<f88b511e>] usb_register_driver+0x8e/0x110 [usbcore] > [ 7565.364188] [<f88d103c>] em28xx_module_init+0x3c/0x59 [em28xx] > [ 7565.364201] [<c01507c6>] sys_init_module+0x126/0x19c0 > [ 7565.364233] [<f8f241f0>] i2c_master_send+0x0/0x50 [i2c_core] > [ 7565.364251] [<c01043c2>] sysenter_past_esp+0x6b/0xa9 > [ 7565.364266] ======================= > [ 7565.364268] Code: fb f8 c7 04 24 73 00 fb f8 e8 c3 d4 17 c7 85 ff 0f 84 fe > 00 00 00 8b 47 08 85 c0 89 c6 0f 84 12 01 00 00 85 f6 0f 84 06 01 00 00 <83> > 46 34 01 85 ff 89 6e 0c 74 05 8b 07 89 46 1c 8d 43 0c ba ac > [ 7565.364315] EIP: [<f8fafcfa>] xc3028_attach+0x4a/0x170 [xc3028_tuner] > SS:ESP 0068:d1a6f79c > [ 7565.364324] ---[ end trace 73ef3ce3f18e79ad ]--- > > lsmod > > [EMAIL PROTECTED]:~$ lsmod > Module Size Used by > xc3028_tuner 9984 1 > tvp5150 20368 0 > tuner 68264 0 > em28xx 96781 1 > compat_ioctl32 2304 1 em28xx > ir_common 39940 1 em28xx > videodev 30080 1 em28xx > v4l2_common 18304 4 tvp5150,tuner,em28xx,videodev > v4l1_compat 15492 2 em28xx,videodev > tveeprom 16656 1 em28xx > i2c_core 24832 5 xc3028_tuner,tvp5150,tuner,em28xx,tveeprom > nls_iso8859_1 4992 1 > nls_cp437 6656 1 > vfat 14464 1 > fat 54556 1 vfat > wlan_wep 7936 0 > i915 32512 2 > drm 82452 3 i915 > binfmt_misc 12808 1 > af_packet 23812 2 > rfcomm 41744 2 > l2cap 25728 13 rfcomm > bluetooth 61156 4 rfcomm,l2cap > ipv6 267780 16 > ppdev 10372 0 > acpi_cpufreq 10796 1 > cpufreq_powersave 2688 0 > cpufreq_ondemand 9740 1 > cpufreq_stats 7104 0 > freq_table 5536 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats > cpufreq_conservative 8712 0 > cpufreq_userspace 5284 0 > sbs 15112 0 > sbshc 7680 1 sbs > container 5632 0 > dock 11280 0 > iptable_filter 3840 0 > ip_tables 14820 1 iptable_filter > x_tables 16132 1 ip_tables > wlan_scan_sta 14720 1 > ath_rate_sample 15360 1 > ath_pci 113448 0 > wlan 211888 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci > ath_hal 280416 3 ath_rate_sample,ath_pci > parport_pc 36260 0 > lp 12324 0 > parport 37832 3 ppdev,parport_pc,lp > joydev 13120 0 > snd_hda_intel 344728 3 > snd_pcm_oss 42144 0 > snd_mixer_oss 17920 1 snd_pcm_oss > snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss > snd_page_alloc 11400 2 snd_hda_intel,snd_pcm > snd_hwdep 10500 1 snd_hda_intel > snd_seq_dummy 4868 0 > sr_mod 17956 0 > cdrom 37408 1 sr_mod > snd_seq_oss 35584 0 > snd_seq_midi 9376 0 > snd_rawmidi 25760 1 snd_seq_midi > snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi > ndiswrapper 192920 0 > snd_seq 54224 6 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > snd_timer 24836 2 snd_pcm,snd_seq > snd_seq_device 9612 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > pata_acpi 8320 0 > battery 14212 0 > serio_raw 7940 0 > snd 56996 17 > snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > button 9232 0 > acer_acpi 18112 0 > led_class 6020 1 acer_acpi > video 19856 0 > output 4736 1 video > iTCO_wdt 13092 0 > iTCO_vendor_support 4868 1 iTCO_wdt > ac 6916 0 > intel_agp 25492 1 > shpchp 34452 0 > pci_hotplug 30880 1 shpchp > soundcore 8800 1 snd > evdev 13056 10 > wmi_acer 9644 1 acer_acpi > agpgart 34760 3 drm,intel_agp > pcspkr 4224 0 > psmouse 40336 0 > ext3 136712 1 > jbd 48404 1 ext3 > mbcache 9600 1 ext3 > ata_generic 8324 0 > sg 36880 0 > sd_mod 30720 5 > usb_storage 73664 1 > libusual 19108 1 usb_storage > usbhid 31872 0 > hid 38784 1 usbhid > ata_piix 19588 0 > ahci 28420 2 > libata 159344 4 pata_acpi,ata_generic,ata_piix,ahci > scsi_mod 151436 5 sr_mod,sg,sd_mod,usb_storage,libata > tg3 116228 0 > ehci_hcd 37900 0 > uhci_hcd 27024 0 > usbcore 146028 9 > em28xx,ndiswrapper,usb_storage,libusual,usbhid,ehci_hcd,uhci_hcd > thermal 16796 0 > processor 36872 4 acpi_cpufreq,thermal > fan 5636 0 > fbcon 42912 0 > tileblit 3456 1 fbcon > font 9472 1 fbcon > bitblit 6784 1 fbcon > softcursor 3072 1 bitblit > fuse 50580 1 > > > lsusb > in the meantime not working, I dont why. Before it worked and showed: > > Bus 007 Device 016: ID eb1a:e323 eMPIA Technology, Inc. > > > modinfo em28xx > > filename: > /lib/modules/2.6.24-19-generic/kernel/drivers/media/video/em28xx/em28xx.ko > license: GPL > description: Empia em28xx based USB video device driver > author: Ludovico Cavedon <[EMAIL PROTECTED]>, Markus Rechberger <[EMAIL > PROTECTED]>, Mauro Carvalho Chehab <[EMAIL PROTECTED]>, Sascha Sommer <[EMAIL > PROTECTED]> > srcversion: E30972D578FB0766AA2D7A3 > alias: usb:v093BpA005d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApA316d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApE305d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2751d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2304p0226d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2304p0227d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2040p6513d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2883d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2001pF112d*dc*dsc*dp*ic*isc*ip* > alias: usb:v0413p6023d*dc*dsc*dp*ic*isc*ip* > alias: usb:v185Bp2870d*dc*dsc*dp*ic*isc*ip* > alias: usb:v0CCDp0047d*dc*dsc*dp*ic*isc*ip* > alias: usb:v0CCDp0043d*dc*dsc*dp*ic*isc*ip* > alias: usb:v0CCDp005Ed*dc*dsc*dp*ic*isc*ip* > alias: usb:v0CCDp004Cd*dc*dsc*dp*ic*isc*ip* > alias: usb:v0CCDp004Fd*dc*dsc*dp*ic*isc*ip* > alias: usb:v0CCDp0042d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2040p6502d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2040p6500d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2304p021Ad*dc*dsc*dp*ic*isc*ip* > alias: usb:v2304p0207d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2040p4201d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2040p4200d*dc*dsc*dp*ic*isc*ip* > alias: usb:v2304p0208d*dc*dsc*dp*ic*isc*ip* > alias: usb:v0CCDp0036d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApE357d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApE355d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApE350d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApE300d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApE323d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApE320d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1ApE310d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2870d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2881d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2861d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2860d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2750d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2821d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2820d*dc*dsc*dp*ic*isc*ip* > alias: usb:vEB1Ap2800d*dc*dsc*dp*ic*isc*ip* > depends: > i2c-core,ir-common,usbcore,videodev,tveeprom,v4l2-common,v4l1-compat,compat_ioctl32 > vermagic: 2.6.24-19-generic SMP mod_unload 586 > parm: disable_ir:disable infrared remote support (int) > parm: ir_debug:enable debug messages [IR] (int) > parm: core_debug:enable debug messages [core] (int) > parm: reg_debug:enable debug messages [URB reg] (int) > parm: isoc_debug:enable debug messages [isoc transfers] (int) > parm: alt:alternate setting to use for video endpoint (int) > parm: i2c_scan:scan i2c bus at insmod time (int) > parm: i2c_debug:enable debug messages [i2c] (int) > parm: card:card type (array of int) > parm: video_nr:video device numbers (array of int) > parm: vbi_nr:vbi device numbers (array of int) > parm: tuner:tuner type (int) > parm: video_debug:enable debug messages [video] (int) > parm: device_mode:device mode (DVB-T/Analogue TV) (int) > parm: vbi_mode:VBI mode (0 disabled/1 enabled(default, if appropriate)) (int) > > > lsmod | grep em28 > > em28xx 96781 1 > compat_ioctl32 2304 1 em28xx > ir_common 39940 1 em28xx > videodev 30080 1 em28xx > v4l2_common 18304 4 tvp5150,tuner,em28xx,videodev > v4l1_compat 15492 2 em28xx,videodev > tveeprom 16656 1 em28xx > i2c_core 24832 5 xc3028_tuner,tvp5150,tuner,em28xx,tveeprom > usbcore 146028 10 > em28xx,ndiswrapper,usb_storage,libusual,usbhid,ehci_hcd,uhci_hcd > > > veerstaad > > -- > 2.6.24.12 won't boot with em28xx device > https://bugs.launchpad.net/bugs/204578 > You received this bug notification because you are a direct subscriber > of the bug. > -- 2.6.24.12 won't boot with em28xx device https://bugs.launchpad.net/bugs/204578 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
