[ 16.771345] Early unpacking initramfs... done [ 17.079905] ACPI: Core revision 20070126 [ 17.079985] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 17.529402] Using local APIC timer interrupts. [ 17.579308] APIC timer calibration result 12501151 [ 17.579310] Detected 12.501 MHz APIC timer. [ 17.579408] SMP alternatives: switching to SMP code [ 17.579889] Booting processor 1/2 APIC 0x1 [ 17.588999] Initializing CPU#1 [ 17.666187] Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=8000766) [ 17.666193] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 17.666195] CPU: L2 Cache: 512K (64 bytes/line) [ 17.666197] CPU 1/1 -> Node 0 [ 17.666199] CPU: Physical Processor ID: 0 [ 17.666200] CPU: Processor Core ID: 1 [ 17.666302] AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 17.666315] AMD C1E detected late. Force timer broadcast. [ 17.667352] Brought up 2 CPUs [ 17.667461] CPU0 attaching sched-domain: [ 17.667464] domain 0: span 03 [ 17.667466] groups: 01 02 [ 17.667468] domain 1: span 03 [ 17.667470] groups: 03 [ 17.667471] CPU1 attaching sched-domain: [ 17.667473] domain 0: span 03 [ 17.667474] groups: 02 01 [ 17.667476] domain 1: span 03 [ 17.667478] groups: 03 [ 17.667707] net_namespace: 120 bytes [ 17.668118] Time: 16:13:26 Date: 07/23/08 [ 17.668152] NET: Registered protocol family 16 [ 17.668341] ACPI: bus type pci registered [ 17.668411] PCI: Using configuration type 1 [ 17.669513] ACPI: EC: Look up EC in DSDT [ 17.671394] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 17.671962] ACPI: Interpreter enabled [ 17.671964] ACPI: (supports S0 S3 S4 S5) [ 17.671978] ACPI: Using IOAPIC for interrupt routing [ 17.671541] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 17.679406] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 17.679409] ACPI: EC: driver started in interrupt mode [ 17.679478] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.680378] PCI: Transparent bridge - 0000:00:08.0 [ 17.680555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.680650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 17.680671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 17.680703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 17.711058] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 17.711261] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 17.711450] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 17.711639] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 17.711827] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 17.712014] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 17.712206] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 17.712395] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 17.712585] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 17.712774] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 17.712963] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 17.713152] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 17.713343] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 17.713537] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 17.713727] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 17.713917] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 17.714107] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 17.714297] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 17.714486] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 17.714621] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.714649] pnp: PnP ACPI init [ 17.714657] ACPI: bus type pnp registered [ 17.716715] pnp: PnP ACPI: found 12 devices [ 17.716718] ACPI: ACPI bus type pnp unregistered [ 17.716992] PCI: Using ACPI for IRQ routing [ 17.716995] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.730217] NET: Registered protocol family 8 [ 17.730218] NET: Registered protocol family 20 [ 17.730312] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 17.730316] hpet0: 3 32-bit timers, 25000000 Hz [ 17.731369] AppArmor: AppArmor Filesystem Enabled [ 17.735177] Time: hpet clocksource has been installed. [ 17.735181] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 17.735184] Could not switch to high resolution mode on CPU 0 [ 17.738195] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 17.738199] Could not switch to high resolution mode on CPU 1 [ 17.746221] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 17.746226] system 00:03: ioport range 0x1000-0x107f has been reserved [ 17.746229] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 17.746231] system 00:03: ioport range 0x1400-0x147f has been reserved [ 17.746234] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 17.746236] system 00:03: ioport range 0x1800-0x187f has been reserved [ 17.746238] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 17.746243] system 00:04: ioport range 0x360-0x361 has been reserved [ 17.746245] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 17.746253] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 17.746256] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 17.746259] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 17.746261] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 17.746263] system 00:0b: iomem range 0x0-0x0 could not be reserved [ 17.746266] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 17.746676] PCI: Bridge: 0000:00:08.0 [ 17.746678] IO window: disabled. [ 17.746681] MEM window: f6100000-f61fffff [ 17.746683] PREFETCH window: disabled. [ 17.746685] PCI: Bridge: 0000:00:0c.0 [ 17.746687] IO window: 4000-4fff [ 17.746689] MEM window: f2000000-f3ffffff [ 17.746691] PREFETCH window: f0000000-f1ffffff [ 17.746693] PCI: Bridge: 0000:00:0d.0 [ 17.746695] IO window: disabled. [ 17.746697] MEM window: f6000000-f60fffff [ 17.746698] PREFETCH window: disabled. [ 17.746707] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 17.746716] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 17.746722] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 17.746768] NET: Registered protocol family 2 [ 17.790244] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.791844] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 17.798427] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 17.799218] TCP: Hash tables configured (established 524288 bind 65536) [ 17.799221] TCP reno registered [ 17.814195] checking if image is initramfs... it is [ 18.414397] Freeing initrd memory: 7551k freed [ 18.419829] Simple Boot Flag at 0x36 set to 0x1 [ 18.421582] audit: initializing netlink socket (disabled) [ 18.421594] audit(1216829606.336:1): initialized [ 18.423496] VFS: Disk quotas dquot_6.5.1 [ 18.423571] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 18.423694] io scheduler noop registered [ 18.423696] io scheduler anticipatory registered [ 18.423698] io scheduler deadline registered [ 18.423798] io scheduler cfq registered (default) [ 18.423827] pci 0000:00:00.0: Enabling HT MSI Mapping [ 18.425401] pci 0000:00:07.0: Enabling HT MSI Mapping [ 18.425418] pci 0000:00:08.0: Enabling HT MSI Mapping [ 18.425433] pci 0000:00:09.0: Enabling HT MSI Mapping [ 18.425448] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 18.425461] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 18.425474] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 18.425488] Boot video device is 0000:00:12.0 [ 18.425659] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 18.425682] assign_interrupt_mode Found MSI capability [ 18.425702] Allocate Port Service[0000:00:0c.0:pcie00] [ 18.425766] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 18.425787] assign_interrupt_mode Found MSI capability [ 18.425802] Allocate Port Service[0000:00:0d.0:pcie00] [ 18.451940] Real Time Clock Driver v1.12ac [ 18.452134] hpet_resources: 0xfed00000 is busy [ 18.452169] Linux agpgart interface v0.102 [ 18.452171] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.453171] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.453237] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 18.453323] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 18.480177] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.480182] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.489787] mice: PS/2 mouse device common for all mice [ 18.489823] cpuidle: using governor ladder [ 18.489826] cpuidle: using governor menu [ 18.489974] NET: Registered protocol family 1 [ 18.490074] registered taskstats version 1 [ 18.490219] Magic number: 0:599:237 [ 18.490254] hash matches device ttyv7 [ 18.490263] hash matches device ttysa [ 18.490360] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 18.490363] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 18.490365] EDD information not available. [ 18.490373] Freeing unused kernel memory: 320k freed [ 18.506847] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.699052] fuse init (API version 7.9) [ 19.719324] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 19.719331] ACPI: Processor [CPU0] (supports 8 throttling states) [ 19.718527] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 19.718535] ACPI: Processor [CPU1] (supports 8 throttling states) [ 19.719835] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126] [ 20.100964] usbcore: registered new interface driver usbfs [ 20.100990] usbcore: registered new interface driver hub [ 20.101245] usbcore: registered new device driver usb [ 20.112046] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 20.112059] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 20.112238] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 20.112245] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 20.112503] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 20.112536] ehci_hcd 0000:00:02.1: debug port 1 [ 20.112540] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 20.112551] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 20.113509] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.122541] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.122671] usb usb1: configuration #1 chosen from 1 choice [ 20.122695] hub 1-0:1.0: USB hub found [ 20.122702] hub 1-0:1.0: 7 ports detected [ 20.136728] SCSI subsystem initialized [ 20.161368] libata version 3.00 loaded. [ 20.226793] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 20.226799] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z019] -> GSI 22 (level, low) -> IRQ 22 [ 20.226996] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 20.227002] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 20.227079] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 20.227110] ehci_hcd 0000:00:04.1: debug port 1 [ 20.227114] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 20.227120] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 20.238315] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.238408] usb usb2: configuration #1 chosen from 1 choice [ 20.238432] hub 2-0:1.0: USB hub found [ 20.238438] hub 2-0:1.0: 2 ports detected [ 20.341360] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 20.341722] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 20.341734] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 20.341739] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 20.649588] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 20.815970] usb 2-2: configuration #1 chosen from 1 choice [ 20.865996] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1e:68:82:13:c9 [ 20.866001] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 20.867308] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 20.867321] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 20.867509] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 20.867516] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 20.867579] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 20.867598] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 20.923108] usb usb3: configuration #1 chosen from 1 choice [ 20.923131] hub 3-0:1.0: USB hub found [ 20.923139] hub 3-0:1.0: 7 ports detected [ 21.025224] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 21.025229] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z018] -> GSI 18 (level, low) -> IRQ 18 [ 21.025438] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 21.025446] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 21.025512] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 21.025527] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 21.082797] usb usb4: configuration #1 chosen from 1 choice [ 21.082820] hub 4-0:1.0: USB hub found [ 21.082827] hub 4-0:1.0: 2 ports detected [ 21.184913] ahci 0000:00:09.0: version 3.0 [ 21.185282] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 21.185292] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 21.339275] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 21.559952] usb 3-2: configuration #1 chosen from 1 choice [ 21.580178] usbcore: registered new interface driver hiddev [ 21.585979] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input2 [ 21.614748] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2 [ 21.624136] hiddev96hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-2 [ 21.624149] usbcore: registered new interface driver usbhid [ 21.624152] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 22.186417] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 22.186422] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part [ 22.186426] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 22.187582] scsi0 : ahci [ 22.187933] scsi1 : ahci [ 22.188101] scsi2 : ahci [ 22.188269] scsi3 : ahci [ 22.188349] ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484100 irq 509 [ 22.188352] ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484180 irq 509 [ 22.188355] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484200 irq 509 [ 22.188357] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf6484280 irq 509 [ 22.825073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 22.824689] ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 8909, max UDMA/100 [ 22.824694] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 22.825183] ata1.00: configured for UDMA/100 [ 23.144416] ata2: SATA link down (SStatus 0 SControl 300) [ 23.463756] ata3: SATA link down (SStatus 0 SControl 300) [ 23.783101] ata4: SATA link down (SStatus 0 SControl 300) [ 23.783210] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2320B 8909 PQ: 0 ANSI: 5 [ 23.784968] pata_amd 0000:00:06.0: version 0.3.10 [ 23.785033] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 23.787623] scsi4 : pata_amd [ 23.788025] scsi5 : pata_amd [ 23.788316] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 23.788319] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 24.137949] ata5.00: ATAPI: PIONEER DVDRW DR-KD08HB, 1K09, max MWDMA2 [ 24.338818] ata5.00: configured for MWDMA2 [ 24.339539] ata6: port disabled. ignoring. [ 24.377198] scsi 4:0:0:0: CD-ROM PIONEER DVDRW DR-KD08HB 1K09 PQ: 0 ANSI: 5 [ 24.378270] PCI: Enabling device 0000:02:05.0 (0100 -> 0102) [ 24.378603] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 24.378614] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 24.430722] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 24.448001] Driver 'sd' needs updating - please use bus_type methods [ 24.448960] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 24.448972] sd 0:0:0:0: [sda] Write Protect is off [ 24.448974] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.448987] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.449037] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 24.449045] sd 0:0:0:0: [sda] Write Protect is off [ 24.449047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.449058] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.449062] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 24.527004] sda1 sda2 sda3 sda4 < sda5 sda6 > [ 24.554123] sd 0:0:0:0: [sda] Attached SCSI disk [ 24.560072] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.560095] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 24.751926] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 24.751932] Uniform CD-ROM driver Revision: 3.20 [ 24.751991] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 24.877845] Attempting manual resume [ 24.877849] swsusp: Resume From Partition 8:5 [ 24.877850] PM: Checking swsusp image. [ 24.878044] PM: Resume from disk failed. [ 24.918642] kjournald starting. Commit interval 5 seconds [ 24.918001] EXT3-fs: mounted filesystem with ordered data mode. [ 25.703253] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b000ad20701] [ 31.913414] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 32.010680] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.036004] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.228429] input: Power Button (FF) as /devices/virtual/input/input4 [ 32.350012] ACPI: Power Button (FF) [PWRF] [ 32.350082] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 32.401605] nvidia: module license 'NVIDIA' taints kernel. [ 32.421897] ACPI: Sleep Button (CM) [SLPB] [ 32.421974] input: Lid Switch as /devices/virtual/input/input6 [ 32.453749] ACPI: Lid Switch [LID] [ 32.453882] input: Power Button (CM) as /devices/virtual/input/input7 [ 32.746012] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 32.746024] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 16 (level, low) -> IRQ 16 [ 32.746032] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 32.746234] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 32.748940] ACPI: Power Button (CM) [PWRB] [ 32.999880] ricoh-mmc: Ricoh MMC Controller disabling driver [ 32.999892] ricoh-mmc: Copyright(c) Philip Langdale [ 32.999942] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 32.999952] ricoh-mmc: Controller is now disabled. [ 33.013985] ACPI: Battery Slot [BAT0] (battery present) [ 33.168835] sdhci: Secure Digital Host Controller Interface driver [ 33.168840] sdhci: Copyright(c) Pierre Ossman [ 33.168893] sdhci: SDHCI controller found at 0000:02:05.1 [1180:0822] (rev 22) [ 33.169255] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 33.169267] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 33.169549] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 33.169648] mmc0: SDHCI at 0xf6100800 irq 7 DMA [ 33.272735] ACPI: AC Adapter [ACAD] (off-line) [ 33.272869] ACPI: WMI-Acer: Mapper loaded [ 33.275775] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 33.335758] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 33.620420] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 33.807034] ath_pci: disagrees about version of symbol _ath_hal_attach [ 33.807040] ath_pci: Unknown symbol _ath_hal_attach [ 33.807126] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor [ 33.807129] ath_pci: Unknown symbol ath_hal_process_noisefloor [ 33.807514] ath_pci: disagrees about version of symbol ath_hal_computetxtime [ 33.807516] ath_pci: Unknown symbol ath_hal_computetxtime [ 33.807767] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee [ 33.807769] ath_pci: Unknown symbol ath_hal_mhz2ieee [ 33.807953] ath_pci: Unknown symbol _ath_hal_detach [ 33.808506] ath_pci: Unknown symbol ath_hal_print_decoded_register [ 33.809046] ath_pci: disagrees about version of symbol ath_hal_init_channels [ 33.809048] ath_pci: Unknown symbol ath_hal_init_channels [ 33.809281] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes [ 33.809283] ath_pci: Unknown symbol ath_hal_getwirelessmodes [ 33.907382] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 33.907396] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 33.907682] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 33.961862] Linux video capture interface: v2.00 [ 34.001708] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000 [ 34.013280] uvcvideo: Found UVC 1.00 device HP Webcam (0408:030c) [ 34.016824] usbcore: registered new interface driver uvcvideo [ 34.016829] USB Video Class driver (v0.1.0) [ 34.078856] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 36.045589] lp: driver loaded but no devices found [ 36.136884] ath_pci: disagrees about version of symbol _ath_hal_attach [ 36.136889] ath_pci: Unknown symbol _ath_hal_attach [ 36.136980] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor [ 36.136982] ath_pci: Unknown symbol ath_hal_process_noisefloor [ 36.137384] ath_pci: disagrees about version of symbol ath_hal_computetxtime [ 36.137386] ath_pci: Unknown symbol ath_hal_computetxtime [ 36.137646] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee [ 36.137648] ath_pci: Unknown symbol ath_hal_mhz2ieee [ 36.137836] ath_pci: Unknown symbol _ath_hal_detach [ 36.138415] ath_pci: Unknown symbol ath_hal_print_decoded_register [ 36.138987] ath_pci: disagrees about version of symbol ath_hal_init_channels [ 36.138989] ath_pci: Unknown symbol ath_hal_init_channels [ 36.139232] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes [ 36.139233] ath_pci: Unknown symbol ath_hal_getwirelessmodes [ 36.193524] Adding 5855652k swap on /dev/sda5. Priority:-1 extents:1 across:5855652k [ 36.218668] EXT3 FS on sda3, internal journal [ 36.407732] kjournald starting. Commit interval 5 seconds [ 36.407910] EXT3 FS on sda6, internal journal [ 36.407917] EXT3-fs: mounted filesystem with ordered data mode. [ 36.891528] ip_tables: (C) 2000-2006 Netfilter Core Team [ 37.352442] No dock devices found. [ 37.611267] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 37.611600] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12 [ 37.611605] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 [ 37.611607] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 37.611610] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 38.520371] ppdev: user-space parallel port driver [ 38.646806] audit(1216854827.749:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5203 profile="/usr/sbin/cupsd" namespace="default" [ 39.411559] Clocksource tsc unstable (delta = -100029685 ns) [ 40.155739] Bluetooth: Core ver 2.11 [ 40.156043] NET: Registered protocol family 31 [ 40.156046] Bluetooth: HCI device and connection manager initialized [ 40.156051] Bluetooth: HCI socket layer initialized [ 40.162435] Bluetooth: L2CAP ver 2.9 [ 40.162439] Bluetooth: L2CAP socket layer initialized [ 40.197316] Bluetooth: RFCOMM socket layer initialized [ 40.197336] Bluetooth: RFCOMM TTY layer initialized [ 40.197338] Bluetooth: RFCOMM ver 1.8 [ 42.761801] NET: Registered protocol family 17 [ 43.981435] NET: Registered protocol family 10 [ 43.982049] lo: Disabled Privacy Extensions [ 48.458289] eth0: no IPv6 routers present [ 55.801855] CPU0 attaching NULL sched-domain. [ 55.801861] CPU1 attaching NULL sched-domain. [ 55.807069] CPU0 attaching sched-domain: [ 55.807074] domain 0: span 03 [ 55.807076] groups: 01 02 [ 55.807079] domain 1: span 03 [ 55.807081] groups: 03 [ 55.807083] domain 2: span 03 [ 55.807085] groups: 03 [ 55.807087] CPU1 attaching sched-domain: [ 55.807089] domain 0: span 03 [ 55.807091] groups: 02 01 [ 55.807093] domain 1: span 03 [ 55.807095] groups: 03 [ 55.807097] domain 2: span 03 [ 55.807099] groups: 03 [ 79.441214] ath_pci: disagrees about version of symbol _ath_hal_attach [ 79.441223] ath_pci: Unknown symbol _ath_hal_attach [ 79.441327] ath_pci: disagrees about version of symbol ath_hal_process_noisefloor [ 79.441330] ath_pci: Unknown symbol ath_hal_process_noisefloor [ 79.441758] ath_pci: disagrees about version of symbol ath_hal_computetxtime [ 79.441764] ath_pci: Unknown symbol ath_hal_computetxtime [ 79.442038] ath_pci: disagrees about version of symbol ath_hal_mhz2ieee [ 79.442043] ath_pci: Unknown symbol ath_hal_mhz2ieee [ 79.442234] ath_pci: Unknown symbol _ath_hal_detach [ 79.442853] ath_pci: Unknown symbol ath_hal_print_decoded_register [ 79.443453] ath_pci: disagrees about version of symbol ath_hal_init_channels [ 79.443456] ath_pci: Unknown symbol ath_hal_init_channels [ 79.443719] ath_pci: disagrees about version of symbol ath_hal_getwirelessmodes [ 79.443723] ath_pci: Unknown symbol ath_hal_getwirelessmodes
-- Is this a bug? Wireless connection disappeared after updates https://bugs.launchpad.net/bugs/251280 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
