Public bug reported:

I run Ubuntu 8.04.1 and after I suspend, everything works fine except
USB devices. I could try to plug in an external HDD or a USB drive or a
mouse, but none of them work. If I list the contents of /dev and try to
work it manually, I see that the devices have not even shown up. So this
is what I get, following the various debugging instructions out there to
debug suspend/resume.

>From dmesg (whole output attached):
[  344.112011] usb 1-2: new high speed USB device using ehci_hcd and address 8
[  344.149278] usb 1-2: device descriptor read/64, error -32 
[  344.221155] usb 1-2: device descriptor read/64, error -32 
[  344.293028] usb 1-2: new high speed USB device using ehci_hcd and address 9
[  344.330297] usb 1-2: device descriptor read/64, error -32 
[  344.402173] usb 1-2: device descriptor read/64, error -32 
[  344.474062] usb 1-2: new high speed USB device using ehci_hcd and address 10
[  344.609812] usb 1-2: device not accepting address 10, error -32 
[  344.647120] usb 1-2: new high speed USB device using ehci_hcd and address 11
[  345.039849] usb 1-2: device not accepting address 11, error -32 
[  474.498052] end_request: I/O error, dev sr0, sector 8379400
[  474.498059] Buffer I/O error on device sr0, logical block 2094850
[  474.513461] end_request: I/O error, dev sr0, sector 8379404
[  474.513466] Buffer I/O error on device sr0, logical block 2094851
[  474.528882] end_request: I/O error, dev sr0, sector 8379400
[  474.528888] Buffer I/O error on device sr0, logical block 2094850
[  474.528895] Buffer I/O error on device sr0, logical block 2094851
[  475.989036] usb 1-2: new high speed USB device using ehci_hcd and address 12
[  476.026305] usb 1-2: device descriptor read/64, error -32 
[  476.098181] usb 1-2: device descriptor read/64, error -32 
[  476.170056] usb 1-2: new high speed USB device using ehci_hcd and address 13
[  476.207325] usb 1-2: device descriptor read/64, error -32 
[  476.279199] usb 1-2: device descriptor read/64, error -32 
[  476.351076] usb 1-2: new high speed USB device using ehci_hcd and address 14
[  476.486835] usb 1-2: device not accepting address 14, error -32 
[  476.524105] usb 1-2: new high speed USB device using ehci_hcd and address 15
[  476.659874] usb 1-2: device not accepting address 15, error -32 

I hope this helps....

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: mouse suspend usb

-- 
USB devices fail after suspend
https://bugs.launchpad.net/bugs/252341
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to