1. output of 'uname -a':
[EMAIL PROTECTED]:~$ uname -a
Linux melissafrench-laptop 2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 
2008 i686 GNU/Linux
[EMAIL PROTECTED]:~$ 
2.dmesg > dmesg.log output: yeilds nothing, no file of any kind it just seems 
to swallow the command...
   dmesg output is:
[   18.308177] AppArmor: AppArmor initialized
[   18.308181] Failure registering capabilities with primary security module.
[   18.308188] Mount-cache hash table entries: 512
[   18.308315] Initializing cgroup subsys ns
[   18.308320] Initializing cgroup subsys cpuacct
[   18.308331] CPU: After generic identify, caps: afebfbff 20100000 00000000 
00000000 0000e31d 00000000 00000001 00000000
[   18.308338] monitor/mwait feature present.
[   18.308340] using mwait in idle threads.
[   18.308344] CPU: L1 I cache: 32K, L1 D cache: 32K
[   18.308346] CPU: L2 cache: 1024K
[   18.308348] CPU: After all inits, caps: afebfbff 20100000 00000000 00003940 
0000e31d 00000000 00000001 00000000
[   18.308357] Compat vDSO mapped to ffffe000.
[   18.308370] Checking 'hlt' instruction... OK.
[   18.324498] SMP alternatives: switching to UP code
[   18.325995] Freeing SMP alternatives: 11k freed
[   18.326088] Early unpacking initramfs... done
[   18.650477] ACPI: Core revision 20070126
[   18.650535] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not 
found.
[   18.690275] CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz stepping 01
[   18.690301] Total of 1 processors activated (3729.84 BogoMIPS).
[   18.690486] ENABLING IO-APIC IRQs
[   18.690689] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   18.835266] Brought up 1 CPUs
[   18.835288] CPU0 attaching sched-domain:
[   18.835291]  domain 0: span 01
[   18.835292]   groups: 01
[   18.835430] net_namespace: 64 bytes
[   18.835437] Booting paravirtualized kernel on bare hardware
[   18.835857] Time: 21:44:16  Date: 08/05/08
[   18.835878] NET: Registered protocol family 16
[   18.836044] EISA bus registered
[   18.836049] ACPI: bus type pci registered
[   18.836569] PCI: PCI BIOS revision 3.00 entry at 0xfde37, last bus=24
[   18.836571] PCI: Using configuration type 1
[   18.836579] Setting up standard PCI resources
[   18.839893] ACPI: EC: EC description table is found, configuring boot EC
[   18.843806] ACPI: BIOS _OSI(Linux) query honored via DMI
[   18.844424] ACPI: EC: non-query interrupt received, switching to interrupt 
mode
[   18.919719] ACPI: Interpreter enabled
[   18.919721] ACPI: (supports S0 S3 S4 S5)
[   18.919735] ACPI: Using IOAPIC for interrupt routing
[   18.924830] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
[   18.924833] ACPI: EC: driver started in poll mode
[   18.924961] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   18.926754] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   18.926759] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   18.928366] PCI: Transparent bridge - 0000:00:1e.0
[   18.928504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   18.928668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[   18.928774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[   18.928880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[   18.928987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   18.931806] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[   18.931995] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[   18.932180] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[   18.932363] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[   18.932546] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[   18.932728] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[   18.932910] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[   18.933090] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[   18.933248] ACPI: EC: non-query interrupt received, switching to interrupt 
mode
[   18.933333] ACPI: Power Resource [PUBS] (on)
[   18.933386] Linux Plug and Play Support v0.97 (c) Adam Belay
[   18.933413] pnp: PnP ACPI init
[   18.933420] ACPI: bus type pnp registered
[   18.934477] pnpacpi: exceeded the max number of mem resources: 12
[   18.935497] pnp: PnP ACPI: found 10 devices
[   18.935500] ACPI: ACPI bus type pnp unregistered
[   18.935503] PnPBIOS: Disabled by ACPI PNP
[   18.935692] PCI: Using ACPI for IRQ routing
[   18.935695] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
post a report
[   19.154665] NET: Registered protocol family 8
[   19.154667] NET: Registered protocol family 20
[   19.154699] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   19.154703] hpet0: 3 64-bit timers, 14318180 Hz
[   19.155739] AppArmor: AppArmor Filesystem Enabled
[   19.158652] Time: tsc clocksource has been installed.
[   19.158670] Switched to high resolution mode on CPU 0
[   19.166633] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[   19.166636] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[   19.166638] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[   19.166641] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[   19.166643] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[   19.166645] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[   19.166648] system 00:00: iomem range 0x0-0x0 could not be reserved
[   19.166650] system 00:00: iomem range 0x0-0x0 could not be reserved
[   19.166652] system 00:00: iomem range 0x0-0x0 could not be reserved
[   19.166654] system 00:00: iomem range 0xe0000-0xe3fff has been reserved
[   19.166656] system 00:00: iomem range 0xe4000-0xe7fff has been reserved
[   19.166659] system 00:00: iomem range 0xe8000-0xebfff has been reserved
[   19.166664] system 00:02: ioport range 0x164e-0x164f has been reserved
[   19.166666] system 00:02: ioport range 0x1000-0x107f has been reserved
[   19.166669] system 00:02: ioport range 0x1180-0x11bf has been reserved
[   19.166671] system 00:02: ioport range 0x800-0x80f has been reserved
[   19.166673] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[   19.166675] system 00:02: ioport range 0x1600-0x165f could not be reserved
[   19.166678] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be 
reserved
[   19.166681] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be 
reserved
[   19.166683] system 00:02: iomem range 0xfed14000-0xfed17fff could not be 
reserved
[   19.166686] system 00:02: iomem range 0xfed18000-0xfed18fff could not be 
reserved
[   19.166688] system 00:02: iomem range 0xfed19000-0xfed19fff could not be 
reserved
[   19.166691] system 00:02: iomem range 0xfed45000-0xfed4bfff could not be 
reserved
[   19.166693] system 00:02: iomem range 0xfed40000-0xfed44fff could not be 
reserved
[   19.197031] PCI: Bridge: 0000:00:1c.0
[   19.197037]   IO window: 2000-2fff
[   19.197044]   MEM window: f4000000-f5ffffff
[   19.197053]   PREFETCH window: f8600000-f86fffff
[   19.197066] PCI: Bridge: 0000:00:1c.1
[   19.197070]   IO window: 3000-3fff
[   19.197077]   MEM window: f6000000-f7ffffff
[   19.197085]   PREFETCH window: f8700000-f87fffff
[   19.197098] PCI: Bridge: 0000:00:1c.2
[   19.197099]   IO window: disabled.
[   19.197107]   MEM window: f8200000-f82fffff
[   19.197114]   PREFETCH window: disabled.
[   19.197129] PCI: Bus 22, cardbus bridge: 0000:15:00.0
[   19.197131]   IO window: 00004000-000040ff
[   19.197138]   IO window: 00004400-000044ff
[   19.197144]   PREFETCH window: d8000000-dbffffff
[   19.197153]   MEM window: 70000000-73ffffff
[   19.197162] PCI: Bridge: 0000:00:1e.0
[   19.197167]   IO window: 4000-7fff
[   19.197175]   MEM window: d4000000-d7efffff
[   19.197181]   PREFETCH window: d8000000-dbffffff
[   19.197241] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> 
IRQ 16
[   19.197252] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   19.197302] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> 
IRQ 17
[   19.197310] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   19.197361] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> 
IRQ 18
[   19.197368] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   19.197387] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
[   19.197400] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   19.197431] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> 
IRQ 19
[   19.197437] PCI: Setting latency timer of device 0000:15:00.0 to 64
[   19.197450] NET: Registered protocol family 2
[   19.234541] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   19.234752] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[   19.235261] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   19.235610] TCP: Hash tables configured (established 131072 bind 65536)
[   19.235613] TCP reno registered
[   19.246616] checking if image is initramfs... it is
[   19.877639] Freeing initrd memory: 7576k freed
[   19.877808] Simple Boot Flag at 0x35 set to 0x1
[   19.878245] audit: initializing netlink socket (disabled)
[   19.878258] audit(1217972656.348:1): initialized
[   19.878418] highmem bounce pool size: 64 pages
[   19.880112] VFS: Disk quotas dquot_6.5.1
[   19.880177] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   19.880295] io scheduler noop registered
[   19.880297] io scheduler anticipatory registered
[   19.880298] io scheduler deadline registered
[   19.880308] io scheduler cfq registered (default)
[   19.880319] Boot video device is 0000:00:02.0
[   19.880588] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   19.880703] assign_interrupt_mode Found MSI capability
[   19.880800] Allocate Port Service[0000:00:1c.0:pcie00]
[   19.880834] Allocate Port Service[0000:00:1c.0:pcie02]
[   19.880993] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   19.881112] assign_interrupt_mode Found MSI capability
[   19.881198] Allocate Port Service[0000:00:1c.1:pcie00]
[   19.881226] Allocate Port Service[0000:00:1c.1:pcie02]
[   19.881401] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   19.881522] assign_interrupt_mode Found MSI capability
[   19.881609] Allocate Port Service[0000:00:1c.2:pcie00]
[   19.881638] Allocate Port Service[0000:00:1c.2:pcie02]
[   19.881928] isapnp: Scanning for PnP cards...
[   20.239676] isapnp: No Plug & Play device found
[   20.262868] Real Time Clock Driver v1.12ac
[   20.262954] hpet_resources: 0xfed00000 is busy
[   20.262984] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 
enabled
[   20.264073] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[   20.264137] input: Macintosh mouse button emulation as 
/devices/virtual/input/input0
[   20.264222] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 
1,12
[   20.272650] serio: i8042 KBD port at 0x60,0x64 irq 1
[   20.272654] serio: i8042 AUX port at 0x60,0x64 irq 12
[   20.276797] mice: PS/2 mouse device common for all mice
[   20.276898] EISA: Probing bus 0 at eisa.0
[   20.276907] Cannot allocate resource for EISA slot 1
[   20.276909] Cannot allocate resource for EISA slot 2
[   20.276911] Cannot allocate resource for EISA slot 3
[   20.276913] Cannot allocate resource for EISA slot 4
[   20.276914] Cannot allocate resource for EISA slot 5
[   20.276916] Cannot allocate resource for EISA slot 6
[   20.276917] Cannot allocate resource for EISA slot 7
[   20.276925] EISA: Detected 0 cards.
[   20.276928] cpuidle: using governor ladder
[   20.276929] cpuidle: using governor menu
[   20.277006] NET: Registered protocol family 1
[   20.277031] Using IPI No-Shortcut mode
[   20.277058] registered taskstats version 1
[   20.277162]   Magic number: 4:300:752
[   20.277164]   hash matches device ttyS3
[   20.277252] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   20.277253] EDD information not available.
[   20.277432] Freeing unused kernel memory: 368k freed
[   20.281619] input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input1
[   21.476547] fuse init (API version 7.9)
[   21.493915] Monitor-Mwait will be used to enter C-1 state
[   21.493919] Monitor-Mwait will be used to enter C-2 state
[   21.493921] Monitor-Mwait will be used to enter C-3 state
[   21.494029] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   21.494033] ACPI: Processor [CPU0] (supports 8 throttling states)
[   21.494047] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   21.496124] ACPI: Thermal Zone [THM0] (35 C)
[   21.497548] ACPI: Thermal Zone [THM1] (37 C)
[   22.043176] usbcore: registered new interface driver usbfs
[   22.043198] usbcore: registered new interface driver hub
[   22.053611] usbcore: registered new device driver usb
[   22.059557] USB Universal Host Controller Interface driver v3.0
[   22.059612] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> 
IRQ 16
[   22.059627] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   22.059633] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   22.059856] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus 
number 1
[   22.059903] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[   22.060030] usb usb1: configuration #1 chosen from 1 choice
[   22.060050] hub 1-0:1.0: USB hub found
[   22.060055] hub 1-0:1.0: 2 ports detected
[   22.161497] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> 
IRQ 17
[   22.161513] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   22.161520] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   22.161541] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus 
number 2
[   22.161585] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
[   22.161697] usb usb2: configuration #1 chosen from 1 choice
[   22.161720] hub 2-0:1.0: USB hub found
[   22.161724] hub 2-0:1.0: 2 ports detected
[   22.222685] SCSI subsystem initialized
[   22.261437] libata version 3.00 loaded.
[   22.265302] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> 
IRQ 19
[   22.265317] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   22.265322] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   22.265345] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 3
[   22.265388] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001860
[   22.265492] usb usb3: configuration #1 chosen from 1 choice
[   22.265511] hub 3-0:1.0: USB hub found
[   22.265516] hub 3-0:1.0: 2 ports detected
[   22.369154] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> 
IRQ 20
[   22.369169] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   22.369174] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   22.369195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 4
[   22.369239] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001880
[   22.369343] usb usb4: configuration #1 chosen from 1 choice
[   22.369363] hub 4-0:1.0: USB hub found
[   22.369367] hub 4-0:1.0: 2 ports detected
[   22.472950] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 21
[   22.472967] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   22.472974] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   22.472995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 5
[   22.473037] uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018a0
[   22.473145] usb usb5: configuration #1 chosen from 1 choice
[   22.473165] hub 5-0:1.0: USB hub found
[   22.473169] hub 5-0:1.0: 2 ports detected
[   22.578047] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> 
IRQ 18
[   22.578069] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   22.578075] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   22.578106] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus 
number 6
[   22.582035] PCI: cache line size of 32 is not supported by device 
0000:00:1a.7
[   22.582047] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800
[   22.596626] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[   22.596739] usb usb6: configuration #1 chosen from 1 choice
[   22.596760] hub 6-0:1.0: USB hub found
[   22.596765] hub 6-0:1.0: 4 ports detected
[   22.700829] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> 
IRQ 22
[   22.700850] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   22.700856] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   22.700881] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 7
[   22.704802] ehci_hcd 0000:00:1d.7: debug port 1
[   22.704815] PCI: cache line size of 32 is not supported by device 
0000:00:1d.7
[   22.704825] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xf8504c00
[   22.720407] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[   22.720514] usb usb7: configuration #1 chosen from 1 choice
[   22.720536] hub 7-0:1.0: USB hub found
[   22.720541] hub 7-0:1.0: 6 ports detected
[   22.824420] tg3.c:v3.86 (November 9, 2007)
[   22.824507] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> 
IRQ 21
[   22.824526] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   23.023874] Clocksource tsc unstable (delta = -4987665452 ns)
[   23.027862] Time: hpet clocksource has been installed.
[   23.038391] eth0: Tigon3 [partno(BCM95751) rev b002 PHY(5787)] (PCI Express) 
10/100/1000Base-T Ethernet 00:1c:25:90:e3:07
[   23.038397] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] 
TSOcap[1]
[   23.038399] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   23.038656] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> 
IRQ 19
[   23.038699] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   23.038714] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   23.040970] ahci 0000:00:1f.2: version 3.0
[   23.041012] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> 
IRQ 19
[   23.041088] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) 
don't match, using nr_ports
[   23.041090] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
[   23.069573] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 
impl SATA mode
[   23.069577] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum 
part 
[   23.069587] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   23.069819] scsi0 : ahci
[   23.070034] scsi1 : ahci
[   23.070161] scsi2 : ahci
[   23.070223] ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf8504100 
irq 220
[   23.070228] ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf8504180 
irq 220
[   23.070231] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xf8504200 
irq 220
[   23.082715] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   23.090697] ata1.00: ATA-7: WDC WD800BEVS-08RST2, 08.01G08, max UDMA/133
[   23.090700] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   23.091071] ata1.00: configured for UDMA/133
[   23.099009] ata2: SATA link down (SStatus 0 SControl 0)
[   23.107631] ata3: SATA link down (SStatus 0 SControl 0)
[   23.107745] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVS-08 08.0 
PQ: 0 ANSI: 5
[   23.112478] ata_piix 0000:00:1f.1: version 2.12
[   23.112503] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> 
IRQ 19
[   23.112548] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   23.112948] scsi3 : ata_piix
[   23.113312] scsi4 : ata_piix
[   23.113672] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[   23.113674] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[   23.118708] Driver 'sd' needs updating - please use bus_type methods
[   23.121109] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   23.121121] sd 0:0:0:0: [sda] Write Protect is off
[   23.121123] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.121137] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   23.121183] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   23.121191] sd 0:0:0:0: [sda] Write Protect is off
[   23.121193] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.121207] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   23.121210]  sda: sda1 sda2
[   23.122108] sd 0:0:0:0: [sda] Attached SCSI disk
[   23.127180] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   23.218653] ata4.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, 1.04, max 
UDMA/33
[   23.252987] ata4.00: configured for UDMA/33
[   23.253054] ata5: port disabled. ignoring.
[   23.257600] scsi 3:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-T10N  1.04 
PQ: 0 ANSI: 5
[   23.257673] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[   23.277313] Driver 'sr' needs updating - please use bus_type methods
[   23.294786] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   23.294790] Uniform CD-ROM driver Revision: 3.20
[   23.294838] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   23.335270] loop: module loaded
[   23.354706] kjournald starting.  Commit interval 5 seconds
[   23.354720] EXT3-fs: mounted filesystem with ordered data mode.
[   27.073216] Linux agpgart interface v0.102
[   27.167400] agpgart: Detected an Intel 965GM Chipset.
[   27.167666] agpgart: Detected 7676K stolen memory.
[   27.192650] agpgart: AGP aperture is 256M @ 0xe0000000
[   27.236548] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   27.238777] shpchp: Unknown symbol acpi_run_oshp
[   27.238855] shpchp: Unknown symbol pci_hp_change_slot_info
[   27.238951] shpchp: Unknown symbol pci_hp_register
[   27.239191] shpchp: Unknown symbol pci_hp_deregister
[   27.239379] shpchp: Unknown symbol acpi_get_hp_params_from_firmware
[   27.296494] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.699858] input: Power Button (FF) as /devices/virtual/input/input2
[   27.711661] ACPI: Power Button (FF) [PWRF]
[   27.711773] input: Lid Switch as /devices/virtual/input/input3
[   27.712519] ACPI: Lid Switch [LID]
[   27.712593] input: Sleep Button (CM) as /devices/virtual/input/input4
[   27.730552] ACPI: Sleep Button (CM) [SLPB]
[   28.638021] iTCO_vendor_support: vendor-support=0
[   28.829783] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   28.829925] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   28.829981] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   29.193124] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> 
IRQ 20
[   29.193131] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[   29.193159] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   29.234004] input: Video Bus as 
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   29.248920] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   29.250676] input: Video Bus as 
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6
[   29.264886] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   29.900018] ACPI: AC Adapter [AC] (off-line)
[   30.051223] ACPI: Battery Slot [BAT0] (battery present)
[   30.111818] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c4]
[   30.240031] Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
[   30.240038] Socket status: 30000006
[   30.240041] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
[   30.240044] cs: IO port probe 0x4000-0x7fff: clean.
[   30.240873] pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd7efffff
[   30.240875] pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xdbffffff
[   30.466177] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   30.714386] Non-volatile memory driver v1.2
[   30.906025] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   30.921100] input: TPPS/2 IBM TrackPoint as 
/devices/platform/i8042/serio1/input/input8
[   30.940567] thinkpad_acpi: ThinkPad ACPI Extras v0.17
[   30.940570] thinkpad_acpi: http://ibm-acpi.sf.net/
[   30.940572] thinkpad_acpi: ThinkPad BIOS 7PETB2WW (2.12 ), EC 7KHT24WW-1.08
[   30.940574] thinkpad_acpi: Lenovo ThinkPad R61e
[   30.940919] thinkpad_acpi: radio switch found; radios are disabled
[   30.945493] thinkpad_acpi: standard ACPI backlight interface available, not 
loading native one...
[   30.945776] input: ThinkPad Extra Buttons as /devices/virtual/input/input9
[   32.121009] cs: IO port probe 0x100-0x3af: clean.
[   32.123417] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   32.124431] cs: IO port probe 0x820-0x8ff: clean.
[   32.125268] cs: IO port probe 0xc00-0xcf7: clean.
[   32.126252] cs: IO port probe 0xa00-0xaff: clean.
[   32.207415] lp: driver loaded but no devices found
[   32.261146] ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
[   32.379884] ndiswrapper: driver net5211 (,05/02/2007,5.3.0.45) loaded
[   32.380140] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> 
IRQ 20
[   32.380196] ndiswrapper (ZwClose:2227): closing handle 0xeea15828 not 
implemented
[   32.380314] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   32.792780] ndiswrapper: using IRQ 20
[   32.799631] wlan0: ethernet device 00:1f:3a:8f:13:96 using serialized NDIS 
driver: net5211, version: 0x50003, NDIS version: 0x501, vendor: 'NDIS Network 
Adapter', 168C:001C.5.conf
[   32.805910] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, 
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   32.805978] usbcore: registered new interface driver ndiswrapper
[   32.864469] EXT3 FS on loop0, internal journal
[   41.948768] Adding 976552k swap on /host/ubuntu/disks/swap.disk.  
Priority:-1 extents:1 across:976552k
[   42.186696] ip_tables: (C) 2000-2006 Netfilter Core Team
[   42.340408] PPP generic driver version 2.4.2
[   42.349415] NET: Registered protocol family 17
[   42.369127] NET: Registered protocol family 10
[   42.369321] lo: Disabled Privacy Extensions
[   42.701503] No dock devices found.
[   43.433611] apm: BIOS not found.
[   43.490564] ppdev: user-space parallel port driver
[   43.521558] audit(1217990696.420:2): type=1503 operation="inode_permission" 
requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5074 
profile="/usr/sbin/cupsd" namespace="default"
[   43.589953] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input10
[   44.175180] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.195889] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   44.293343] Bluetooth: Core ver 2.11
[   44.293914] NET: Registered protocol family 31
[   44.293917] Bluetooth: HCI device and connection manager initialized
[   44.293920] Bluetooth: HCI socket layer initialized
[   44.314049] Bluetooth: L2CAP ver 2.9
[   44.314053] Bluetooth: L2CAP socket layer initialized
[   44.369391] Bluetooth: RFCOMM socket layer initialized
[   44.369404] Bluetooth: RFCOMM TTY layer initialized
[   44.369406] Bluetooth: RFCOMM ver 1.8
[   45.691197] [drm] Initialized drm 1.1.0 20060810
[   45.694073] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> 
IRQ 19
[   45.694081] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   45.694145] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   64.937982] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   68.484156] wlan0: no IPv6 routers present
[EMAIL PROTECTED]:~$ 

3.sudo lspci -vvnn > lspci-vvnn.log once again yields nothing, but sudo lspci 
-vvnn:
[EMAIL PROTECTED]:~$ sudo lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory 
Controller Hub [8086:2a00] (rev 0c)
        Subsystem: Lenovo Unknown device [17aa:20b3]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA 
controller])
        Subsystem: Lenovo Unknown device [17aa:20b5]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=1M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 1800 [size=8]
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: 00000000  Data: 0000
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller [8086:2a03] (rev 0c)
        Subsystem: Lenovo Unknown device [17aa:20b5]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 1820 [size=32]

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo ThinkPad T60 [17aa:20aa]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 1840 [size=32]

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Lenovo ThinkPad T61 [17aa:20ab]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f8504800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller [8086:284b] (rev 03)
        Subsystem: Lenovo ThinkPad T61 [17aa:20ac]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 20
        Region 0: Memory at f8300000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express Unknown type IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled CommClk- ExtSynch-
                Link: Speed unknown, Width x0

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: f4000000-f5ffffff
        Prefetchable memory behind bridge: 00000000f8600000-00000000f86fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
                Link: Latency L0s <1us, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x0
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 2, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: fee0100c  Data: 41c9
        Capabilities: [90] Subsystem: Lenovo Unknown device [17aa:20ad]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f6000000-f7ffffff
        Prefetchable memory behind bridge: 00000000f8700000-00000000f87fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 3, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: fee0100c  Data: 41d1
        Capabilities: [90] Subsystem: Lenovo Unknown device [17aa:20ad]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Memory behind bridge: f8200000-f82fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR+ <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 4, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: fee0100c  Data: 41d9
        Capabilities: [90] Subsystem: Lenovo Unknown device [17aa:20ad]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 19
        Region 4: I/O ports at 1860 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 20
        Region 4: I/O ports at 1880 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 21
        Region 4: I/O ports at 18a0 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Lenovo ThinkPad T61 [17aa:20ab]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 22
        Region 0: Memory at f8504c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
        I/O behind bridge: 00004000-00007fff
        Memory behind bridge: d4000000-d7efffff
        Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] Subsystem: Lenovo Unknown device [17aa:20ae]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface 
Controller [8086:2815] (rev 03)
        Subsystem: Lenovo Unknown device [17aa:20a5]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) 
IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Lenovo ThinkPad T61 [17aa:20a6]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 19
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 1810 [size=16]

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) 
SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Lenovo ThinkPad T61 [17aa:20a7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 220
        Region 0: I/O ports at 1c00 [size=8]
        Region 1: I/O ports at 18d4 [size=4]
        Region 2: I/O ports at 18d8 [size=8]
        Region 3: I/O ports at 18d0 [size=4]
        Region 4: I/O ports at 18e0 [size=32]
        Region 5: Memory at f8504000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 
Enable+
                Address: fee0100c  Data: 413a
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] #12 [0010]

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller 
[8086:283e] (rev 03)
        Subsystem: Lenovo ThinkPad T61 [17aa:20a9]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f8505000 (32-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 1c20 [size=32]

03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 
802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
        Subsystem: Atheros Communications Inc. Unknown device [168c:0034]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f7f00000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: 00000000  Data: 0000
        Capabilities: [60] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <512ns, L1 <64us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <512ns, L1 <64us
                Link: ASPM L0s L1 Enabled RCB 128 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
                Vector table: BAR=0 offset=00000000
                PBA: BAR=0 offset=00000000

04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M 
Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
        Subsystem: Lenovo Unknown device [17aa:20d5]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR+ <PERR-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 219
        Region 0: Memory at f8200000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at <ignored> [disabled]
        Capabilities: [48] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] Vital Product Data
        Capabilities: [58] Vendor Specific Information
        Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable+
                Address: 00000000fee0100c  Data: 4142
        Capabilities: [d0] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <4us, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <4us, L1 <64us
                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1

15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6)
        Subsystem: Lenovo Unknown device [17aa:20c4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at d7eff000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
        Memory window 0: d8000000-dbfff000 (prefetchable)
        Memory window 1: 70000000-73fff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

[EMAIL PROTECTED]:~$

I hope that this helps

-- 
8.04 Misidentifies Wirelesscard 
https://bugs.launchpad.net/bugs/254972
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to