Public bug reported:
Binary package hint: linux-restricted-modules-2.6.24-20-generic
As the Summary states, ssh hangs when I try to connect to my other computer.
When I use the b43 module, ssh works fine. My info:
lsb_release -rd:
Description: Ubuntu 8.04.1
Release: 8.04
apt-cache policy linux-restricted-modules-2.6.24-20-generic:
linux-restricted-modules-2.6.24-20-generic:
Installed: 2.6.24.14-20.46
Candidate: 2.6.24.14-20.46
Version table:
*** 2.6.24.14-20.46 0
500 http://us.archive.ubuntu.com hardy-proposed/restricted Packages
100 /var/lib/dpkg/status
uname -a:
Linux allen-fieldhouse 2.6.24-20-generic #1 SMP Mon Jul 28 13:49:52 UTC 2008
i686 GNU/Linux
dpkg -l|grep linux-restricted:
ii linux-restricted-modules 2.6.24.20.22
Generic Linux restricted modules.
ii linux-restricted-modules-2.6.24-16-generic 2.6.24.12-16.34
Non-free Linux 2.6.24 modules on x86/x86_64
ii linux-restricted-modules-2.6.24-19-generic 2.6.24.13-19.45
Non-free Linux 2.6.24 modules on x86/x86_64
ii linux-restricted-modules-2.6.24-20-generic 2.6.24.14-20.46
Non-free Linux 2.6.24 modules on x86/x86_64
ii linux-restricted-modules-common 2.6.24.14-20.46
Non-free Linux 2.6.24 modules helper script
ii linux-restricted-modules-generic 2.6.24.20.22
Restricted Linux modules for generic kernels
sudo lspci -nnvv:
03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN
[14e4:4311] (rev 01)
Subsystem: Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN
Controller [103c:1363]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at b6000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
lshw -C network:
*-network
description: Wireless interface
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
bus info: [EMAIL PROTECTED]:03:00.0
logical name: eth1
version: 01
serial: 00:1a:73:32:fc:24
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=wl ip=192.168.0.4 latency=0
module=wl multicast=yes wireless=IEEE 802.11
I did also test this out using
http://www.broadcom.com/support/802.11/linux_sta.php on Arch using a
2.6.26 kernel and it has the same issue so the issue looks like it is
with the wl module from Broadcom.
** Affects: linux-restricted-modules-2.6.24 (Ubuntu)
Importance: Undecided
Status: New
--
ssh hangs when using wl module
https://bugs.launchpad.net/bugs/259800
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
