Hi, I have some good news we're replacing the alsa driver with a vendor specific audio driver, this will allow to compile the driver again the normal way! The driver should be available within the next few days.
Markus On Wed, Aug 27, 2008 at 12:33 AM, Olivier <[EMAIL PROTECTED]> wrote: > Hello DougM, > I don't know if I can solve your issue, but to me the package provided > worked after a few tricks. > But first, have you installed Kaffeine ? Because when I first tried DVB, > the Digital TV option appeared on Kaffeine, but I could not scan the > channels, and the problem was on the frontend, the system loaded the > distribution frontend module, instead of the empia package one. So I > replaced the zl10353.ko (for my Terratec Hybrid Cinergy XS, yours should > be something like lgdt330x) with the one on the package, and it worked. > > I am using Ubuntu Hardy Amd64 version 2.6.24-19. > > Also, could you provide the rest of dmesg for when you plug in the tv > receptor (not just em28) ? > And just an FYI, you can use "grep -i" for insensitive case (I just > found out about it, Em28 lines did not appear below). > > Le dimanche 24 août 2008 à 01:30 +0000, DougM a écrit : >> Alexey, >> Thanks. Regrettably, analog TV will be gone in 6 months in US by law, so >> need to have DVB by then. Providing more information in hopes of some >> insight. o me it appears modules load, so suspect issue is compatibility >> with applications, unknown options, or missing layer (or something between >> my ears :). >> Doug. >> >> uname -a >> Linux doug 2.6.24-21-eeepc #1 SMP Thu Aug 7 22:18:05 MDT 2008 i686 GNU/Linux >> >> dmesg | grep em28 >> [ 25.653594] em28xx v4l2 driver version 0.0.1 loaded >> [ 25.702122] em28xx: new video device (2040:6513): interface 0, class 255 >> [ 25.702131] em28xx: device is attached to a USB 2.0 bus >> [ 25.702141] em28xx #0: Alternate settings: 8 >> [ 25.702146] em28xx #0: Alternate setting 0, max size= 0 >> [ 25.702152] em28xx #0: Alternate setting 1, max size= 0 >> [ 25.702158] em28xx #0: Alternate setting 2, max size= 1448 >> [ 25.702164] em28xx #0: Alternate setting 3, max size= 2048 >> [ 25.702170] em28xx #0: Alternate setting 4, max size= 2304 >> [ 25.702175] em28xx #0: Alternate setting 5, max size= 2580 >> [ 25.702181] em28xx #0: Alternate setting 6, max size= 2892 >> [ 25.702187] em28xx #0: Alternate setting 7, max size= 3072 >> [ 27.981956] em28xx #0: V4L2 VBI device registered as /dev/vbi0 >> [ 28.000930] em28xx #0: V4L2 device registered as /dev/video0 >> [ 28.000942] em28xx #0: Found Hauppauge WinTV HVR 950 >> [ 28.000993] usbcore: registered new interface driver em28xx >> [ 28.065607] em28xx-audio.c: probing for em28x1 non standard usbaudio >> [ 28.065616] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger >> [ 28.119432] em2880-dvb.c: DVB Init >> [ 28.563549] DVB: registering new adapter (em2880 DVB-T) >> >> lsmod: >> Module Size Used by >> nls_iso8859_1 4224 1 >> nls_cp437 5888 1 >> vfat 13952 1 >> fat 53660 1 vfat >> ipv6 268292 10 >> af_packet 23044 4 >> i915 31744 2 >> drm 81556 3 i915 >> ppdev 9604 0 >> sbs 14344 0 >> sbshc 6912 1 sbs >> dock 10512 0 >> container 4864 0 >> acpi_cpufreq 9876 0 >> cpufreq_userspace 4396 0 >> cpufreq_stats 6284 0 >> cpufreq_powersave 1920 0 >> cpufreq_ondemand 8972 2 >> freq_table 4744 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand >> cpufreq_conservative 7944 0 >> iptable_filter 3072 0 >> ip_tables 14028 1 iptable_filter >> x_tables 15364 1 ip_tables >> ext3 135944 2 >> jbd 47380 1 ext3 >> lgdt330x 8964 1 >> parport_pc 35492 0 >> lp 11556 0 >> parport 37064 3 ppdev,parport_pc,lp >> em28xx_dvb 16644 0 >> dvb_core 80764 2 lgdt330x,em28xx_dvb >> em28xx_audio 10372 0 >> xc3028_tuner 5760 1 >> tvp5150 19600 0 >> evdev 12160 6 >> usb_storage 72640 1 >> em28xx 370880 2 em28xx_dvb,em28xx_audio >> libusual 18340 1 usb_storage >> i2c_core 24064 4 lgdt330x,xc3028_tuner,tvp5150,em28xx >> videodev 28544 1 em28xx >> v4l2_common 17664 2 em28xx,videodev >> v4l1_compat 14724 2 em28xx,videodev >> usbhid 31616 0 >> hid 38144 1 usbhid >> snd_hda_intel 346128 3 >> psmouse 44180 0 >> snd_pcm_oss 41248 0 >> snd_mixer_oss 17024 1 snd_pcm_oss >> serio_raw 7172 0 >> snd_pcm 77572 3 em28xx_audio,snd_hda_intel,snd_pcm_oss >> snd_page_alloc 10632 2 snd_hda_intel,snd_pcm >> snd_hwdep 9732 1 snd_hda_intel >> pcspkr 3456 0 >> iTCO_wdt 12196 0 >> iTCO_vendor_support 4100 1 iTCO_wdt >> snd_seq_dummy 4100 0 >> rt2860sta 524120 1 >> battery 13444 0 >> video 19088 0 >> output 3968 1 video >> snd_seq_oss 34560 0 >> snd_seq_midi 8480 0 >> ac 6148 0 >> atl1e 35092 0 >> snd_rawmidi 24864 1 snd_seq_midi >> eeepc_acpi 7824 0 >> snd_seq_midi_event 7552 2 snd_seq_oss,snd_seq_midi >> snd_seq 53200 6 >> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event >> button 8464 0 >> snd_timer 23940 2 snd_pcm,snd_seq >> snd_seq_device 8716 5 >> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq >> snd 55972 18 >> em28xx_audio,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >> shpchp 33428 0 >> pci_hotplug 14728 1 shpchp >> intel_agp 24724 1 >> soundcore 8032 1 snd >> agpgart 33864 3 drm,intel_agp >> ext2 72456 1 >> mbcache 8704 2 ext3,ext2 >> sg 36240 0 >> sd_mod 29952 8 >> ata_piix 18948 4 >> pata_acpi 7552 0 >> ata_generic 7556 0 >> libata 158576 3 ata_piix,pata_acpi,ata_generic >> scsi_mod 150796 4 usb_storage,sg,sd_mod,libata >> ehci_hcd 37388 0 >> uhci_hcd 26256 0 >> usbcore 145644 9 >> em28xx_dvb,em28xx_audio,usb_storage,em28xx,libusual,usbhid,ehci_hcd,uhci_hcd >> thermal 16028 0 >> processor 36672 4 acpi_cpufreq,thermal >> fan 4868 0 >> fuse 49812 3 >> >> -- >> 2.6.24.12 won't boot with em28xx device >> https://bugs.launchpad.net/bugs/204578 >> You received this bug notification because you are a direct subscriber >> of the bug. >> >> Status in "linux" source package in Ubuntu: Fix Committed >> >> Bug description: >> Hardy using 2.6.24.12 will not boot with Hauppauge HVR-900 USB device >> plugged in if userspace drivers are used. If the device is plugged in after >> boot, the keyboard locks up, and konsole sessions will not close. Syslog >> shows this: >> >> Mar 21 22:29:48 cebo kernel: [ 120.692597] usb 1-3: new high speed USB >> device using ehci_hcd and address 3 >> Mar 21 22:29:48 cebo kernel: [ 120.746395] usb 1-3: configuration #1 chosen >> from 1 choice >> Mar 21 22:29:48 cebo NetworkManager: <debug> [1206091788.714053] >> nm_hal_device_added(): New device added (hal udi is >> '/org/freedesktop/Hal/devices/usb_device_2040_6502_4028497630'). >> Mar 21 22:29:48 cebo kernel: [ 120.808272] Linux video capture interface: >> v2.00 >> Mar 21 22:29:48 cebo kernel: [ 120.837989] em28xx v4l2 driver version 0.0.1 >> loaded >> Mar 21 22:29:48 cebo kernel: [ 120.838770] em28xx new video device >> (2040:6502): interface 0, class 255 >> Mar 21 22:29:48 cebo kernel: [ 120.838773] em28xx: device is attached to a >> USB 2.0 bus >> Mar 21 22:29:48 cebo kernel: [ 120.839640] em28xx #0: Alternate settings: 8 >> Mar 21 22:29:48 cebo kernel: [ 120.839643] em28xx #0: Alternate setting 0, >> max size= 0 >> Mar 21 22:29:48 cebo kernel: [ 120.839644] em28xx #0: Alternate setting 1, >> max size= 0 >> Mar 21 22:29:48 cebo kernel: [ 120.839646] em28xx #0: Alternate setting 2, >> max size= 1448 >> Mar 21 22:29:48 cebo kernel: [ 120.839647] em28xx #0: Alternate setting 3, >> max size= 2048 >> Mar 21 22:29:48 cebo kernel: [ 120.839649] em28xx #0: Alternate setting 4, >> max size= 2304 >> Mar 21 22:29:48 cebo kernel: [ 120.839650] em28xx #0: Alternate setting 5, >> max size= 2580 >> Mar 21 22:29:48 cebo kernel: [ 120.839652] em28xx #0: Alternate setting 6, >> max size= 2892 >> Mar 21 22:29:48 cebo kernel: [ 120.839653] em28xx #0: Alternate setting 7, >> max size= 3072 >> Mar 21 22:29:49 cebo kernel: [ 121.069901] input: em2880/em2870 remote >> control as /devices/virtual/input/input6 >> Mar 21 22:29:49 cebo kernel: [ 121.079796] em28xx-input.c: remote control >> handler attached >> Mar 21 22:29:49 cebo kernel: [ 121.079800] moduleid: 1 >> Mar 21 22:29:49 cebo kernel: [ 121.082696] media-stub: adding support for >> Xceive - xc3028 >> Mar 21 22:29:49 cebo kernel: [ 121.082699] media-stub: userspace driver >> version 1 >> Mar 21 22:29:49 cebo kernel: [ 121.082701] media-stub: Copyright: Markus >> Rechberger <[EMAIL PROTECTED]> >> Mar 21 22:29:49 cebo kernel: [ 121.086204] media-stub: adding support for >> Texas Instruments - tvp5150 >> Mar 21 22:29:49 cebo kernel: [ 121.086207] media-stub: userspace driver >> version 1 >> Mar 21 22:29:49 cebo kernel: [ 121.086209] media-stub: Copyright: Mauro >> Chehab >> Mar 21 22:29:49 cebo kernel: [ 121.089605] tuner 5-0061: chip found @ 0xc2 >> (em28xx #0) >> Mar 21 22:29:49 cebo kernel: [ 121.089623] attach inform (default): >> detected I2C address c2 >> Mar 21 22:29:49 cebo kernel: [ 121.092112] attach_inform: tvp5150 detected. >> Mar 21 22:29:49 cebo NetworkManager: <debug> [1206091789.690624] >> nm_hal_device_added(): New device added (hal udi is >> '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'). >> Mar 21 22:29:49 cebo kernel: [ 121.135516] em28xx: registered module_id 1 >> Mar 21 22:29:49 cebo kernel: [ 121.135598] requesting to change mode >> Mar 21 22:29:49 cebo kernel: [ 121.214783] requesting to change mode >> Mar 21 22:29:51 cebo kernel: [ 121.681827] em28xx #0: V4L2 VBI device >> registered as /dev/vbi0 >> Mar 21 22:29:51 cebo kernel: [ 121.682511] em28xx #0: V4L2 device >> registered as /dev/video0 >> Mar 21 22:29:51 cebo kernel: [ 121.682513] em28xx #0: Found Hauppauge WinTV >> HVR Rev. 1.2 >> Mar 21 22:29:51 cebo kernel: [ 121.682526] usbcore: registered new >> interface driver em28xx >> Mar 21 22:29:51 cebo NetworkManager: <debug> [1206091791.181402] >> nm_hal_device_added(): New device added (hal udi is >> '/org/freedesktop/Hal/devices/usb_device_2040_6502_4028497630_if0'). >> Mar 21 22:29:51 cebo kernel: [ 121.705070] em28xx_audio: no version for >> "snd_pcm_new" found: kernel tainted. >> Mar 21 22:29:51 cebo NetworkManager: <debug> [1206091791.223238] >> nm_hal_device_added(): New device added (hal udi is >> '/org/freedesktop/Hal/devices/usb_device_2040_6502_4028497630_video4linux'). >> Mar 21 22:29:51 cebo kernel: [ 121.725918] em28xx-audio.c: probing for >> em28x1 non standard usbaudio >> Mar 21 22:29:51 cebo kernel: [ 121.725922] em28xx-audio.c: Copyright (C) >> 2006 Markus Rechberger >> Mar 21 22:29:51 cebo kernel: [ 121.725978] BUG: unable to handle kernel >> paging request at virtual address 38326d65 >> Mar 21 22:29:51 cebo kernel: [ 121.725981] printing eip: f8b90743 *pde = >> 00000000 >> Mar 21 22:29:51 cebo kernel: [ 121.725984] Oops: 0000 [#1] SMP >> Mar 21 22:29:51 cebo kernel: [ 121.725986] Modules linked in: >> em28xx_audio(F) media_stub tvp5150 tuner tea5767 tda8290 tuner_simple mt20xx >> tea5761 em28xx videodev v4l2_common v4l1_compat binfmt_misc rfcomm l2cap >> bluetooth ipv6 ppdev powernow_k8 cpufreq_powersave cpufreq_stats >> cpufreq_userspace cpufreq_ondemand cpufreq_conservative freq_table video >> output container sbs sbshc dock battery iptable_filter ip_tables x_tables >> aes_i586 dm_crypt dm_mod af_packet ac sbp2 lp snd_hda_intel joydev >> snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_hwdep snd_seq_dummy >> snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer >> snd_seq_device snd nvidia(P) i2c_nforce2 rt2500 button psmouse serio_raw >> i2c_core k8temp agpgart soundcore evdev parport_pc parport pcspkr reiserfs >> sr_mod cdrom usbhid amd74xx hid ide_core ata_generic pata_amd sg sd_mod >> sata_nv sata_via pata_acpi libata ohci_hcd scsi_mod forcedeth ohci1394 >> ieee1394 ehci_hcd usbcore thermal processor fan fbcon tileblit font bitblit >> softcursor fuse >> Mar 21 22:29:51 cebo kernel: [ 121.726025] >> Mar 21 22:29:51 cebo kernel: [ 121.726027] Pid: 6999, comm: modprobe >> Tainted: PF (2.6.24-12-generic #1) >> Mar 21 22:29:51 cebo kernel: [ 121.726029] EIP: 0060:[<f8b90743>] EFLAGS: >> 00010246 CPU: 1 >> Mar 21 22:29:51 cebo kernel: [ 121.726040] EIP is at >> snd_pcm_timer_init+0x23/0x170 [snd_pcm] >> Mar 21 22:29:51 cebo kernel: [ 121.726042] EAX: f18d1000 EBX: 38326d65 ECX: >> f192bdec EDX: 00000000 >> Mar 21 22:29:51 cebo kernel: [ 121.726044] ESI: f18d1000 EDI: f2a7a634 EBP: >> 00000018 ESP: f192bdd4 >> Mar 21 22:29:51 cebo kernel: [ 121.726045] DS: 007b ES: 007b FS: 00d8 GS: >> 0033 SS: 0068 >> Mar 21 22:29:51 cebo kernel: [ 121.726048] Process modprobe (pid: 6999, >> ti=f192a000 task=f1922b40 task.ti=f192a000) >> Mar 21 22:29:51 cebo kernel: [ 121.726049] Stack: 00000000 00000001 >> f2a4f400 00000000 f2a4f400 00000000 00000003 00000000 >> Mar 21 22:29:51 cebo kernel: [ 121.726053] f2a7ae00 00000018 >> f8af120c 00000000 f18d1000 f2a7a600 f8b8867f f8b9992c >> Mar 21 22:29:51 cebo kernel: [ 121.726057] f2a7a600 f192be28 >> f2a7a800 00000001 f8b915f4 436d6370 63304431 ffffff00 >> Mar 21 22:29:51 cebo kernel: [ 121.726061] Call Trace: >> Mar 21 22:29:51 cebo kernel: [ 121.726071] [<f8af120c>] >> snd_add_device_sysfs_file+0x3c/0x70 [snd] >> Mar 21 22:29:51 cebo kernel: [ 121.726083] [<f8b8867f>] >> snd_pcm_dev_register+0xef/0x200 [snd_pcm] >> Mar 21 22:29:51 cebo kernel: [ 121.726101] [<f8af5e4d>] >> snd_device_register_all+0x2d/0x60 [snd] >> Mar 21 22:29:51 cebo NetworkManager: <debug> [1206091791.303418] >> nm_hal_device_added(): New device added (hal udi is >> '/org/freedesktop/Hal/devices/usb_device_2040_6502_4028497630_video4linux_0'). >> Mar 21 22:29:51 cebo kernel: [ 121.726112] [<f8af1a1e>] >> snd_card_register+0x1e/0x320 [snd] >> Mar 21 22:29:51 cebo kernel: [ 121.726128] [<f9d76168>] >> em28xx_audio_init+0xf8/0x150 [em28xx_audio] >> Mar 21 22:29:51 cebo kernel: [ 121.726136] [<fad838de>] >> em28xx_register_extension+0x5e/0xb0 [em28xx] >> Mar 21 22:29:51 cebo kernel: [ 121.726147] [sys_init_module+0x126/0x19c0] >> sys_init_module+0x126/0x19c0 >> Mar 21 22:29:51 cebo kernel: [ 121.726191] [sysenter_past_esp+0x6b/0xa9] >> sysenter_past_esp+0x6b/0xa9 >> Mar 21 22:29:51 cebo kernel: [ 121.726206] ======================= >> Mar 21 22:29:51 cebo kernel: [ 121.726207] Code: 00 00 5b c3 8d 74 26 00 56 >> 89 c6 53 83 ec 30 8b 56 30 c7 44 24 1c 00 00 00 00 8d 4c 24 18 c7 44 24 18 >> 03 00 00 00 8b 18 83 e2 01 <8b> 03 8b 00 89 44 24 20 8b 43 0c 89 44 24 24 8b >> 46 0c 01 c0 09 >> Mar 21 22:29:51 cebo kernel: [ 121.726226] EIP: [<f8b90743>] >> snd_pcm_timer_init+0x23/0x170 [snd_pcm] SS:ESP 0068:f192bdd4 >> Mar 21 22:29:51 cebo kernel: [ 121.726236] ---[ end trace 13c5e79623f7d91d >> ]--- >> >> >> Couldn't get dmesg info cos of keyboard/konsole problem. Also, using kernel >> 2.6.24.11, system booted fine with device plugged in, but failed to load >> em28xx-audio - something about a symbol mismatch - seems to be a similar >> problem to http://mcentral.de/pipermail/em28xx/2008-February/001316.html >> >> I'm using Kubuntu Hardy - development branch with all updates as of March >> 21. I have no other issues with any hardware or software, just this. > > -- > 2.6.24.12 won't boot with em28xx device > https://bugs.launchpad.net/bugs/204578 > You received this bug notification because you are a direct subscriber > of the bug. > -- 2.6.24.12 won't boot with em28xx device https://bugs.launchpad.net/bugs/204578 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
