** Description changed: - I have two 500GB WD5000aaks drives on both channels of Silicon Image (Sil31122) controller (built-in nforce2 board/Abit NF7-s v2); + I have two 500GB WD5000aaks drives on both channels of Silicon Image (Sil3112) controller (built-in nforce2 board/Abit NF7-s v2); and one old 120GB PATA drive. Other hardware: AthlonXP3.2ghz(32bit), 1Gbram. Kernel 2.6.24-19 on Ubuntu. Knoppix 2.6.24 No matter how I copy data between SATA drives (tried Knoppix as well); no matter the method(dd conv=notrunc; cp -a;GUI); copying SIGNIFICANT amount of data(>~20GB) produces errors; which appear in fsck. DD once (if=sda,of=sdb) did errors in partiton table, so data partition was not visible at all to fdisk. Copying via PATA DOES work however(!) : cp -a /mnt/sda5/* /mnt/hdc5 ; cp -a /mnt/hdc5/* /mnt/sdb5. dmesg shows no errors. I unmounted the drives on dd; did "swapoff -a" for knoppix. Windows/dos based utilities copy data without errors. All drives pass offline SMART test. Good smart table, no bad blocks. Cables are ok. Temps ok. CPU not overclocked. Tried to repartition and use different partiton sizes.
** Tags added: error kernel nforce sata -- Copying from one sata drive to other produces errors https://bugs.launchpad.net/bugs/261769 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
