My experimentation server should arrive next week, I'll let you know how it goes.
====== Graham Alan Simpson Specialist, Apple Princesshay 07809 208210 [EMAIL PROTECTED] [EMAIL PROTECTED] (Apple Internal Use Only) Sent from my iPhone 3G. On 29 Aug 2008, at 03:19, Leann Ogasawara <[EMAIL PROTECTED]> wrote: > The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for > the > upcoming Intrepid Ibex 8.10 release. As a result, the kernel team > would > appreciate it if you could please test this newer 2.6.27 Ubuntu > kernel. > There are one of two ways you should be able to test: > > 1) If you are comfortable installing packages on your own, the linux- > image-2.6.27-* package is currently available for you to install and > test. > > --or-- > > 2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer > 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. > Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. > You should then be able to test via a LiveCD. > > Please let us know immediately if this newer 2.6.27 kernel resolves > the > bug reported here or if the issue remains. More importantly, please > open a new bug report for each new bug/regression introduced by the > 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, > please > specifically note if the issue does or does not appear in the 2.6.26 > kernel. Thanks again, we really appreicate your help and feedback. > > ** Tags added: cft-2.6.27 > > -- > lpfc driver fails to enumerate RA4100 LUN's correctly. > https://bugs.launchpad.net/bugs/232444 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux” source package in Ubuntu: Incomplete > > Bug description: > Binary package hint: linux-ubuntu-modules-2.6.24-16-server > > > ========BEGIN RELEVANT /etc/modprobe.d/options========= > options lpfc lpfc_topology=0x4 lpfc_max_luns=32000 > ========END RELEVANT /etc/modprobe.d/options========== > > ========BEGIN RELEVANT DMESG========= > Emulex LightPulse Fibre SCSI driver 8.2.2 > Copyright(c) 2004-2007 Emulex. All rights reserved. > lpfc 0000:03:06.0: 0:1303 Link Up Event x1 received Data: x1 x1 x0 x0 > <Whole lot of NPORT errors which should be irrelevant since it's in > AL mode, which doesn't USE NPORT's...> > scsi 0:0:0:0: RAID COMPAQ > ARRAY CONTROLLER 2.60 PQ: 0 ANSI: 0 > scsi: host 0 channel 0 id 0 lun16384 has a LUN larger than allowed > by the host adapter > scsi: host 0 channel 0 id 0 lun16385 has a LUN larger than allowed > by the host adapter > <More NPORT errors> > scsi 0:0:0:0: Attached scsi generic sg0 type 12 > ========END RELEVANT DMESG========== > > ========BEGIN lsb_release -rd========= > Description: Ubuntu 8.04 > Release: 8.04 > ========END lsb_release -rd========== > > ========BEGIN apt-cache policy linux-ubuntu-modules-2.6.24-16- > server========= > linux-ubuntu-modules-2.6.24-16-server: > Installed: 2.6.24-16.23 > Candidate: 2.6.24-16.23 > Version table: > *** 2.6.24-16.23 0 > 500 http://gb.archive.ubuntu.com hardy/main > Packages > 100 /var/lib/dpkg/status > ========END apt-cache policy linux-ubuntu-modules-2.6.24-16- > server========== > > Expectation: > > The LUN's on the RA4100 RAID Array (Listed as COMPAQ RAID ARRAY > 2.60) Firmware version 2.60 enumerate under the Windows Drivers as > LUN 0, LUN 1 - and are attached as SCSI storage devices. > > What happened instead: > > The LUN's enumerated as 16384 and 16385. This seems to be a common > number with the RA4100 - in a similar problem in the qlogic drivers, > the effect was the same. Again, the array works perfectly under the > same card under Windows 2000 using the Emulex SCSIport MINIPORT > drivers available from www.emulex.com. -- lpfc driver fails to enumerate RA4100 LUN's correctly. https://bugs.launchpad.net/bugs/232444 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
