Markus, The alpha code for em28xx and tvtime work well for analog TV on my eeepc, however still no joy on the DVB. uname: Linux dm12345 2.6.24-21-eeepc #1 SMP Thu Aug 7 22:18:05 MDT 2008 i686 GNU/Linux
I did notice lgdt330x.ko in media/dvb/frontend /lib/modules/2.6.24-21-eeepc/kernel/drivers/media/dvb/frontends/lgdt330x.ko /lib/modules/2.6.24-21-eeepc/empia/lgdt3304.ko Not sure if this is source of conflict? Olivier et al, lsmod, dmesg in full follows. Doug. lsmod: Module Size Used by lgdt330x 8964 1 em28xx_dvb 16644 0 dvb_core 80764 2 lgdt330x,em28xx_dvb tuner_xc3028 5888 1 tvp5150 19600 0 em28xx 373056 1 em28xx_dvb i2c_core 24064 4 lgdt330x,tuner_xc3028,tvp5150,em28xx videodev 28544 1 em28xx v4l2_common 17664 2 em28xx,videodev v4l1_compat 14724 2 em28xx,videodev nls_iso8859_1 4224 1 nls_cp437 5888 1 vfat 13952 1 fat 53660 1 vfat af_packet 23044 4 i915 31744 2 drm 81556 3 i915 ppdev 9604 0 ipv6 268292 16 sbs 14344 0 sbshc 6912 1 sbs dock 10512 0 container 4864 0 acpi_cpufreq 9876 0 cpufreq_userspace 4396 0 cpufreq_stats 6284 0 cpufreq_powersave 1920 0 cpufreq_ondemand 8972 2 freq_table 4744 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand cpufreq_conservative 7944 0 iptable_filter 3072 0 ip_tables 14028 1 iptable_filter x_tables 15364 1 ip_tables ext3 135944 2 jbd 47380 1 ext3 parport_pc 35492 0 lp 11556 0 parport 37064 3 ppdev,parport_pc,lp snd_hda_intel 346128 3 snd_pcm_oss 41248 0 snd_mixer_oss 17024 1 snd_pcm_oss snd_pcm 77572 2 snd_hda_intel,snd_pcm_oss snd_page_alloc 10632 2 snd_hda_intel,snd_pcm snd_hwdep 9732 1 snd_hda_intel snd_seq_dummy 4100 0 evdev 12160 6 usbhid 31616 0 hid 38144 1 usbhid psmouse 44180 0 serio_raw 7172 0 atl1e 35092 0 snd_seq_oss 34560 0 snd_seq_midi 8480 0 rt2860sta 524120 1 snd_rawmidi 24864 1 snd_seq_midi pcspkr 3456 0 snd_seq_midi_event 7552 2 snd_seq_oss,snd_seq_midi iTCO_wdt 12196 0 iTCO_vendor_support 4100 1 iTCO_wdt snd_seq 53200 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event shpchp 33428 0 pci_hotplug 14728 1 shpchp snd_timer 23940 2 snd_pcm,snd_seq snd_seq_device 8716 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 55972 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device battery 13444 0 soundcore 8032 1 snd ac 6148 0 video 19088 0 output 3968 1 video eeepc_acpi 7824 0 button 8464 0 intel_agp 24724 1 agpgart 33864 3 drm,intel_agp usb_storage 72640 1 ext2 72456 1 mbcache 8704 2 ext3,ext2 libusual 18340 1 usb_storage sg 36240 0 sd_mod 29952 8 ata_piix 18948 4 pata_acpi 7552 0 ata_generic 7556 0 ehci_hcd 37388 0 libata 158576 3 ata_piix,pata_acpi,ata_generic scsi_mod 150796 4 usb_storage,sg,sd_mod,libata uhci_hcd 26256 0 usbcore 145644 8 em28xx_dvb,em28xx,usbhid,usb_storage,libusual,ehci_hcd,uhci_hcd thermal 16028 0 processor 36672 4 acpi_cpufreq,thermal fan 4868 0 fuse 49812 3 dmesg: [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-21-eeepc ([EMAIL PROTECTED]) (gcc version 4. 2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Aug 7 22:18:05 MDT 2008 (Ubuntu 2.6.24-4 .6-eeepc) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable) [ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 119MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 260000) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 260000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] 0: 0 -> 260000 [ 0.000000] On node 0 totalpages: 260000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 239 pages used for memmap [ 0.000000] HighMem zone: 30385 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBCD0 checksum 0 [ 0.000000] ACPI: RSDP 000FBCD0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3F7A0000, 003C (r1 A_M_I_ OEMRSDT 7000811 MSFT 97) [ 0.000000] ACPI: FACP 3F7A0200, 0084 (r2 A_M_I_ OEMFACP 7000811 MSFT 97) [ 0.000000] ACPI: DSDT 3F7A05B0, 526D (r1 P0017 P0017000 0 INTL 20051 117) [ 0.000000] ACPI: FACS 3F7AE000, 0040 [ 0.000000] ACPI: APIC 3F7A0390, 005C (r1 A_M_I_ OEMAPIC 7000811 MSFT 97) [ 0.000000] ACPI: OEMB 3F7AE040, 0061 (r1 A_M_I_ AMI_OEM 7000811 MSFT 97) [ 0.000000] ACPI: HPET 3F7A5820, 0038 (r1 A_M_I_ OEMHPET 7000811 MSFT 97) [ 0.000000] ACPI: SSDT 3F7AEB80, 04F0 (r1 PmRef CpuPm 3000 INTL 20051 117) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 7:12 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 7:12 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf60 0000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000 000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000 000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 00000 00000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 257969 [ 0.000000] Kernel command line: root=UUID=93e56417-ba7d-4f0d-9961-1e8f17bcae a5 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1600.022 MHz processor. [ 12.886972] Console: colour VGA+ 80x25 [ 12.886978] console [tty0] enabled [ 12.887361] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 12.888155] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.932106] Memory: 1021712k/1040000k available (2123k kernel code, 17512k re served, 984k data, 264k init, 122496k highmem) [ 12.932123] virtual kernel memory layout: [ 12.932125] fixmap : 0xfff9a000 - 0xfffff000 ( 404 kB) [ 12.932128] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.932130] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 12.932132] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 12.932134] .init : 0xc040f000 - 0xc0451000 ( 264 kB) [ 12.932136] .data : 0xc0312c2a - 0xc0408ca4 ( 984 kB) [ 12.932139] .text : 0xc0100000 - 0xc0312c2a (2123 kB) [ 12.932145] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.932218] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, N odes=1 [ 12.932386] hpet clockevent registered [ 13.012269] Calibrating delay using timer specific routine.. 3204.31 BogoMIPS (lpj=6408639) [ 13.012306] Security Framework initialized [ 13.012314] SELinux: Disabled at boot. [ 13.012342] AppArmor: AppArmor initialized [ 13.012348] Failure registering capabilities with primary security module. [ 13.012362] Mount-cache hash table entries: 512 [ 13.012538] Initializing cgroup subsys ns [ 13.012547] Initializing cgroup subsys cpuacct [ 13.012562] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 000 00000 0040c39d 00000000 00000001 00000000 [ 13.012574] monitor/mwait feature present. [ 13.012577] using mwait in idle threads. [ 13.012583] CPU: L1 I cache: 32K, L1 D cache: 24K [ 13.012587] CPU: L2 cache: 512K [ 13.012591] CPU: Physical Processor ID: 0 [ 13.012595] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00043940 0 040c39d 00000000 00000001 00000000 [ 13.012609] Compat vDSO mapped to ffffe000. [ 13.012625] Checking 'hlt' instruction... OK. [ 13.028590] SMP alternatives: switching to UP code [ 13.030412] Early unpacking initramfs... done [ 13.354315] ACPI: Core revision 20070126 [ 13.354423] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.521963] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 13.521991] SMP alternatives: switching to SMP code [ 13.522524] Booting processor 1/1 eip 3000 [ 13.532547] Initializing CPU#1 [ 13.611320] Calibrating delay using timer specific routine.. 3199.99 BogoMIPS (lpj=6399981) [ 13.611334] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 000 00000 0040c39d 00000000 00000001 00000000 [ 13.611345] monitor/mwait feature present. [ 13.611351] CPU: L1 I cache: 32K, L1 D cache: 24K [ 13.611356] CPU: L2 cache: 512K [ 13.611360] CPU: Physical Processor ID: 0 [ 13.611364] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00043940 0 040c39d 00000000 00000001 00000000 [ 13.611567] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 13.611592] Total of 2 processors activated (6404.31 BogoMIPS). [ 13.611799] ENABLING IO-APIC IRQs [ 13.612015] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 13.759300] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 13.779292] Brought up 2 CPUs [ 13.779332] CPU0 attaching sched-domain: [ 13.779336] domain 0: span 3 [ 13.779339] groups: 1 2 [ 13.779345] CPU1 attaching sched-domain: [ 13.779348] domain 0: span 3 [ 13.779351] groups: 2 1 [ 13.779680] net_namespace: 64 bytes [ 13.779695] Booting paravirtualized kernel on bare hardware [ 13.780606] Time: 14:29:37 Date: 08/29/08 [ 13.780644] NET: Registered protocol family 16 [ 13.780994] ACPI: bus type pci registered [ 13.781455] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6 [ 13.781459] PCI: Using configuration type 1 [ 13.781478] Setting up standard PCI resources [ 13.793005] ACPI: EC: Look up EC in DSDT [ 13.808920] ACPI: Interpreter enabled [ 13.808925] ACPI: (supports S0 S1 S3 S4 S5) [ 13.808957] ACPI: Using IOAPIC for interrupt routing [ 13.809511] Error attaching device data [ 13.809606] Error attaching device data [ 13.819406] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 13.819414] ACPI: EC: driver started in poll mode [ 13.819618] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.820550] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 13.820557] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 13.821541] PCI: Transparent bridge - 0000:00:1e.0 [ 13.821600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.821874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 13.822033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 13.822196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 13.822383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 13.843947] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 13.844177] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 13.844402] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 13.844628] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 13.844853] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) * 0, disabled. [ 13.845079] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) * 0, disabled. [ 13.845306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) * 0, disabled. [ 13.845533] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 13.845781] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.845846] pnp: PnP ACPI init [ 13.845861] ACPI: bus type pnp registered [ 13.849378] pnp: PnP ACPI: found 13 devices [ 13.849384] ACPI: ACPI bus type pnp unregistered [ 13.849854] PCI: Using ACPI for IRQ routing [ 13.849860] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.882919] NET: Registered protocol family 8 [ 13.882924] NET: Registered protocol family 20 [ 13.882990] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 13.882998] hpet0: 3 64-bit timers, 14318180 Hz [ 13.884058] AppArmor: AppArmor Filesystem Enabled [ 13.886895] Time: tsc clocksource has been installed. [ 13.886919] Switched to high resolution mode on CPU 0 [ 13.887113] Switched to high resolution mode on CPU 1 [ 13.894928] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 13.894946] system 00:08: ioport range 0x25c-0x25f has been reserved [ 13.894952] system 00:08: ioport range 0x380-0x383 has been reserved [ 13.894957] system 00:08: ioport range 0x400-0x41f has been reserved [ 13.894962] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 13.894967] system 00:08: ioport range 0x800-0x87f has been reserved [ 13.894972] system 00:08: ioport range 0x480-0x4bf has been reserved [ 13.894978] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved [ 13.894983] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 13.894989] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 13.894994] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 13.895000] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 13.895006] system 00:08: iomem range 0xfff00000-0xffffffff could not be rese rved [ 13.895017] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 13.895023] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be rese rved [ 13.895033] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved [ 13.895044] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 13.895049] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 13.895054] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 13.895060] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserv ed [ 13.895065] system 00:0c: iomem range 0x0-0x0 could not be reserved [ 13.925869] PCI: Bridge: 0000:00:1c.0 [ 13.925874] IO window: disabled. [ 13.925882] MEM window: disabled. [ 13.925887] PREFETCH window: disabled. [ 13.925895] PCI: Bridge: 0000:00:1c.1 [ 13.925900] IO window: e000-efff [ 13.925908] MEM window: f8000000-fbffffff [ 13.925914] PREFETCH window: f0000000-f6ffffff [ 13.925921] PCI: Bridge: 0000:00:1c.2 [ 13.925924] IO window: disabled. [ 13.925931] MEM window: disabled. [ 13.925936] PREFETCH window: disabled. [ 13.925944] PCI: Bridge: 0000:00:1c.3 [ 13.925946] IO window: disabled. [ 13.925954] MEM window: f7f00000-f7ffffff [ 13.925959] PREFETCH window: disabled. [ 13.925967] PCI: Bridge: 0000:00:1e.0 [ 13.925969] IO window: disabled. [ 13.925976] MEM window: disabled. [ 13.925981] PREFETCH window: disabled. [ 13.926027] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.926038] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.926067] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.926076] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.926103] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 13.926112] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.926140] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 13.926149] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.926165] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.926190] NET: Registered protocol family 2 [ 13.962850] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.963300] TCP established hash table entries: 131072 (order: 8, 1048576 byt es) [ 13.964357] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 13.964906] TCP: Hash tables configured (established 131072 bind 65536) [ 13.964913] TCP reno registered [ 13.974987] Unpacking initramfs... done [ 14.303809] Freeing initrd memory: 4583k freed [ 14.305424] audit: initializing netlink socket (disabled) [ 14.305449] audit(1220020177.084:1): initialized [ 14.305715] highmem bounce pool size: 64 pages [ 14.309580] VFS: Disk quotas dquot_6.5.1 [ 14.309726] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.309963] io scheduler noop registered [ 14.309968] io scheduler anticipatory registered [ 14.309972] io scheduler deadline registered [ 14.309994] io scheduler cfq registered (default) [ 14.310011] Boot video device is 0000:00:02.0 [ 14.310331] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.310394] assign_interrupt_mode Found MSI capability [ 14.310398] Allocate Port Service[0000:00:1c.0:pcie00] [ 14.310482] Allocate Port Service[0000:00:1c.0:pcie02] [ 14.310627] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 14.310688] assign_interrupt_mode Found MSI capability [ 14.310692] Allocate Port Service[0000:00:1c.1:pcie00] [ 14.310766] Allocate Port Service[0000:00:1c.1:pcie02] [ 14.310910] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 14.310971] assign_interrupt_mode Found MSI capability [ 14.310975] Allocate Port Service[0000:00:1c.2:pcie00] [ 14.311045] Allocate Port Service[0000:00:1c.2:pcie02] [ 14.311191] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 14.311260] assign_interrupt_mode Found MSI capability [ 14.311264] Allocate Port Service[0000:00:1c.3:pcie00] [ 14.311339] Allocate Port Service[0000:00:1c.3:pcie02] [ 14.375784] Real Time Clock Driver v1.12ac [ 14.376097] hpet_resources: 0xfed00000 is busy [ 14.376150] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.377403] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 14.409764] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.409773] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.410038] mice: PS/2 mouse device common for all mice [ 14.410153] cpuidle: using governor ladder [ 14.410158] cpuidle: using governor menu [ 14.410304] NET: Registered protocol family 1 [ 14.410358] Using IPI No-Shortcut mode [ 14.410402] registered taskstats version 1 [ 14.410560] Magic number: 4:602:486 [ 14.410713] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 14.410716] EDD information not available. [ 14.410860] Freeing unused kernel memory: 264k freed [ 14.435944] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se rio0/input/input0 [ 15.749400] fuse init (API version 7.9) [ 15.770666] ACPI: SSDT 3F7AE180, 023C (r1 PmRef Cpu0Ist 3000 INTL 20051 117) [ 15.771012] ACPI: SSDT 3F7AE450, 0724 (r1 PmRef Cpu0Cst 3001 INTL 20051 117) [ 15.771485] Monitor-Mwait will be used to enter C-1 state [ 15.771491] Monitor-Mwait will be used to enter C-2 state [ 15.771685] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 15.771694] ACPI: Processor [P001] (supports 8 throttling states) [ 15.772216] ACPI: SSDT 3F7AE0B0, 00CC (r1 PmRef Cpu1Ist 3000 INTL 20051 117) [ 15.772543] ACPI: SSDT 3F7AE3C0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051 117) [ 15.773247] Marking TSC unstable due to: TSC halts in idle. [ 15.773358] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 15.773369] ACPI: Processor [P002] (supports 8 throttling states) [ 15.775872] Time: hpet clocksource has been installed. [ 15.776708] ACPI: EC: non-query interrupt received, switching to interrupt mo de [ 15.794893] ACPI: Thermal Zone [TZ00] (58 C) [ 16.342313] usbcore: registered new interface driver usbfs [ 16.342351] usbcore: registered new interface driver hub [ 16.343112] usbcore: registered new device driver usb [ 16.346322] USB Universal Host Controller Interface driver v3.0 [ 16.346440] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 16.346462] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 16.346472] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 16.346865] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe r 1 [ 16.346927] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d480 [ 16.347279] usb usb1: configuration #1 chosen from 1 choice [ 16.347345] hub 1-0:1.0: USB hub found [ 16.347364] hub 1-0:1.0: 2 ports detected [ 16.449463] SCSI subsystem initialized [ 16.469425] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 16.469448] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 16.469457] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.469511] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus numbe r 2 [ 16.469560] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 [ 16.469833] usb usb2: configuration #1 chosen from 1 choice [ 16.469898] hub 2-0:1.0: USB hub found [ 16.469913] hub 2-0:1.0: 2 ports detected [ 16.545403] libata version 3.00 loaded. [ 16.570803] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 16.570826] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 16.570835] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 16.570901] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe r 3 [ 16.570949] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880 [ 16.571222] usb usb3: configuration #1 chosen from 1 choice [ 16.571284] hub 3-0:1.0: USB hub found [ 16.571300] hub 3-0:1.0: 2 ports detected [ 16.674663] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 16.674686] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 16.674695] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 16.674760] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus numbe r 4 [ 16.674810] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00 [ 16.675095] usb usb4: configuration #1 chosen from 1 choice [ 16.675160] hub 4-0:1.0: USB hub found [ 16.675177] hub 4-0:1.0: 2 ports detected [ 16.778607] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 16.778629] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 16.778635] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 16.778681] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus numbe r 5 [ 16.782596] ehci_hcd 0000:00:1d.7: debug port 1 [ 16.782605] PCI: cache line size of 32 is not supported by device 0000:00:1d. 7 [ 16.782617] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf7db7c00 [ 16.810317] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 16.822206] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 16.822406] usb usb5: configuration #1 chosen from 1 choice [ 16.822459] hub 5-0:1.0: USB hub found [ 16.822470] hub 5-0:1.0: 8 ports detected [ 16.932126] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 16.932196] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.932220] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 16.939072] ata_piix 0000:00:1f.2: version 2.12 [ 16.939087] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 16.939121] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 16.939193] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.939335] scsi0 : ata_piix [ 16.939449] scsi1 : ata_piix [ 16.942895] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 16.942907] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 17.278037] ata2.00: ATA-5: ASUS-PHISON SSD, TST2.04P, max UDMA/66 [ 17.278045] ata2.00: 7880544 sectors, multi 0: LBA [ 17.278083] ata2.01: ATA-5: ASUS-PHISON SSD, TST2.04P, max UDMA/66 [ 17.278088] ata2.01: 31522176 sectors, multi 0: LBA [ 17.285943] ata2.00: configured for UDMA/66 [ 17.293914] ata2.01: configured for UDMA/66 [ 17.294116] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ : 0 ANSI: 5 [ 17.294303] scsi 1:0:1:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ : 0 ANSI: 5 [ 17.365051] Driver 'sd' needs updating - please use bus_type methods [ 17.365227] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors (4035 MB) [ 17.365264] sd 1:0:0:0: [sda] Write Protect is off [ 17.365272] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.365329] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 17.365449] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors (4035 MB) [ 17.365484] sd 1:0:0:0: [sda] Write Protect is off [ 17.365491] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.365545] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 17.365556] sda: sda1 sda2 sda3 sda4 [ 17.367085] sd 1:0:0:0: [sda] Attached SCSI disk [ 17.367223] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors (16139 MB) [ 17.367256] sd 1:0:1:0: [sdb] Write Protect is off [ 17.367264] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.367317] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 17.367415] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors (16139 MB) [ 17.367447] sd 1:0:1:0: [sdb] Write Protect is off [ 17.367454] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.367506] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 17.367516] sdb: sdb1 sdb2 sdb3 [ 17.369431] sd 1:0:1:0: [sdb] Attached SCSI disk [ 17.380743] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 17.380794] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 17.434401] usb 5-5: new high speed USB device using ehci_hcd and address 3 [ 17.566947] usb 5-5: configuration #1 chosen from 1 choice [ 17.606672] Attempting manual resume [ 17.606679] swsusp: Resume From Partition 8:17 [ 17.606682] PM: Checking swsusp image. [ 17.607231] PM: Resume from disk failed. [ 17.804674] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 18.008462] usb 2-2: configuration #1 chosen from 1 choice [ 18.015599] usbcore: registered new interface driver libusual [ 18.865416] Initializing USB Mass Storage driver... [ 18.865578] scsi2 : SCSI emulation for USB Mass Storage devices [ 18.865696] usb-storage: device found at 3 [ 18.865701] usb-storage: waiting for device to settle before scanning [ 18.865723] usbcore: registered new interface driver usb-storage [ 18.865729] USB Mass Storage support registered. [ 20.633862] Linux agpgart interface v0.102 [ 20.741118] agpgart: Detected an Intel 945GME Chipset. [ 20.741325] agpgart: Detected 7932K stolen memory. [ 20.808201] agpgart: AGP aperture is 256M @ 0xd0000000 [ 21.376252] input: Power Button (FF) as /devices/virtual/input/input1 [ 21.403767] ACPI: Power Button (FF) [PWRF] [ 21.404024] input: Lid Switch as /devices/virtual/input/input2 [ 21.432525] ACPI: Lid Switch [LID] [ 21.432748] input: Sleep Button (CM) as /devices/virtual/input/input3 [ 21.443700] ACPI: Sleep Button (CM) [SLPB] [ 21.443876] input: Power Button (CM) as /devices/virtual/input/input4 [ 21.463671] ACPI: Power Button (CM) [PWRB] [ 21.551818] Asus EeePC Hotkey Driver [ 21.551973] [eeepc hotk] Hotkey init flags 0x41. [ 21.555437] [eeepc hotk] Get control methods supported: 0x101713 [ 22.082599] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNX VIDEO:00/input/input5 [ 22.101636] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 22.197926] ACPI: AC Adapter [AC0] (on-line) [ 23.056174] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.113666] ACPI: Battery Slot [BAT0] (battery present) [ 23.125138] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.507425] iTCO_vendor_support: vendor-support=0 [ 23.540458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 23.540713] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860) [ 23.540813] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.744294] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 23.935697] usb-storage: device scan complete [ 23.936384] scsi 2:0:0:0: Direct-Access Single Flash Reader 1.00 PQ : 0 ANSI: 0 [ 23.963795] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 23.964267] [ 23.964270] [ 23.964272] === pAd = f8a8f000, size = 580788 === [ 23.964274] [ 23.964281] <-- RTMPAllocAdapterBlock, Status=0 [ 23.964329] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 24.207379] Atheros(R) AR8121/AR8113 PCI-E Ethernet Network Driver - version 1.0.0.4 [ 24.207389] Copyright (c) 2007 Atheros Corporation. [ 24.207544] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 24.207568] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 24.435591] sd 2:0:0:0: [sdc] 16023552 512-byte hardware sectors (8204 MB) [ 24.436459] sd 2:0:0:0: [sdc] Write Protect is off [ 24.436468] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 24.436474] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 24.439066] sd 2:0:0:0: [sdc] 16023552 512-byte hardware sectors (8204 MB) [ 24.439936] sd 2:0:0:0: [sdc] Write Protect is off [ 24.439944] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 24.439950] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 24.439960] sdc: sdc1 [ 24.441474] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 24.441569] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 25.071017] usbcore: registered new interface driver hiddev [ 25.121333] input: HID 1241:1166 as /devices/pci0000:00/0000:00:1d.1/usb2/2-2 /2-2:1.0/input/input7 [ 25.144889] input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00 :1d.1-2 [ 25.144926] usbcore: registered new interface driver usbhid [ 25.144936] /home/adamm/git/ubuntu-hardy/debian/build/custom-source-eeepc/dri vers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 25.515022] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.515069] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 26.539008] repeat_elantech == 1 [ 26.539014] repeat_elantech == 2 [ 26.712118] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/ser io1/input/input8 [ 27.700952] lp: driver loaded but no devices found [ 27.882425] Adding 1052216k swap on /dev/sdb1. Priority:-1 extents:1 across: 1052216k [ 29.114744] kjournald starting. Commit interval 5 seconds [ 29.117404] EXT3 FS on sdb3, internal journal [ 29.117418] EXT3-fs: mounted filesystem with ordered data mode. [ 29.121185] kjournald starting. Commit interval 5 seconds [ 29.123860] EXT3 FS on sdb2, internal journal [ 29.123874] EXT3-fs: mounted filesystem with ordered data mode. [ 30.666080] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.475814] No dock devices found. [ 33.201245] NET: Registered protocol family 10 [ 33.202269] lo: Disabled Privacy Extensions [ 33.412057] RX DESC f7fef000 size = 2048 [ 33.412961] <-- RTMPAllocTxRxRingMemory, Status=0 [ 33.420860] I/F(ra0) Key1Str is Invalid key length! KeyLen = 0! [ 33.420985] I/F(ra0) Key2Str is Invalid key length! KeyLen = 0! [ 33.421110] I/F(ra0) Key3Str is Invalid key length! KeyLen = 0! [ 33.421236] I/F(ra0) Key4Str is Invalid key length! KeyLen = 0! [ 33.423046] 1. Phy Mode = 9 [ 33.423060] 2. Phy Mode = 9 [ 33.445393] RTMPSetPhyMode: channel is out of range, use first channel=1 [ 33.453185] 3. Phy Mode = 9 [ 33.454274] MCS Set = ff ff 00 00 01 [ 33.460578] <==== RTMPInitialize, Status=0 [ 33.460675] 0x1300 = 00064300 [ 34.726282] ===>rt_ioctl_giwscan. 8(8) BSS returned, data->length = 619 [ 34.743775] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.102596] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 776 [ 37.176389] ppdev: user-space parallel port driver [ 37.248964] audit(1220020200.680:2): type=1503 operation="inode_permission" r equested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5219 profile="/usr/sbi n/cupsd" namespace="default" [ 38.113954] [drm] Initialized drm 1.1.0 20060810 [ 38.119676] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.119694] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 38.119840] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 39.474890] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1253 [ 41.842206] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1402 [ 44.215467] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1171 [ 46.586800] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1405 [ 46.592234] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1405 [ 73.184167] ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready [ 73.226861] NET: Registered protocol family 17 [ 73.358125] ===>rt_ioctl_giwscan. 19(19) BSS returned, data->length = 1565 [ 76.520191] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 234 [ 76.523422] ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready [ 76.524658] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) [ 76.934914] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 234 [ 87.223404] ra0: no IPv6 routers present [ 99.160905] ===>rt_ioctl_giwscan. 18(18) BSS returned, data->length = 1478 [ 106.142079] ===>rt_ioctl_giwscan. 18(18) BSS returned, data->length = 1478 [ 129.123251] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1405 [ 136.115341] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1405 [ 155.006814] usb 5-3: new high speed USB device using ehci_hcd and address 4 [ 155.143410] usb 5-3: configuration #1 chosen from 1 choice [ 155.269879] Linux video capture interface: v2.00 [ 155.304331] em28xx v4l2 driver version 0.0.1 loaded [ 155.304716] em28xx: new video device (2040:6513): interface 0, class 255 [ 155.304726] em28xx: device is attached to a USB 2.0 bus [ 155.304958] em28xx #0: Alternate settings: 8 [ 155.304965] em28xx #0: Alternate setting 0, max size= 0 [ 155.304970] em28xx #0: Alternate setting 1, max size= 0 [ 155.304976] em28xx #0: Alternate setting 2, max size= 1448 [ 155.304981] em28xx #0: Alternate setting 3, max size= 2048 [ 155.304986] em28xx #0: Alternate setting 4, max size= 2304 [ 155.304992] em28xx #0: Alternate setting 5, max size= 2580 [ 155.304997] em28xx #0: Alternate setting 6, max size= 2892 [ 155.305003] em28xx #0: Alternate setting 7, max size= 3072 [ 155.857397] attach_inform: tvp5150 detected. [ 155.920817] tvp5150 0-005c: tvp5150am1 detected. [ 157.668954] successfully attached tuner [ 157.674753] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 157.691786] em28xx #0: V4L2 device registered as /dev/video0 [ 157.691814] em28xx #0: Found Hauppauge WinTV HVR 950 [ 157.691887] usbcore: registered new interface driver em28xx [ 157.854407] em2880-dvb.c: DVB Init [ 158.200357] DVB: registering new adapter (em2880 DVB-T) [ 158.200888] DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Fron tend)... [ 158.202226] Em28xx: Initialized (Em2880 DVB Extension) extension [ 159.099511] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1405 [ 162.475538] tvp5150 0-005c: tvp5150am1 detected. [ 166.089607] ===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1405 [ 184.366413] em28xx_dvb_init [ 248.789604] em28xx_dvb_init [ 288.917110] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1250 [ 295.902257] ===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1329 [ 312.352556] ===>rt_ioctl_giwscan. 20(20) BSS returned, data->length = 1638 [ 418.727185] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1174 [ 425.715311] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1174 [ 548.540074] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1250 [ 555.528161] ===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1250 -- 2.6.24.12 won't boot with em28xx device https://bugs.launchpad.net/bugs/204578 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
