I´ve sucessufuly installed the final release of Ubuntu 8.04 in the same hardware, using the alternate CD. I think that the error were just in the release candidate. Now it works just fine. Thanks.
2008/8/29 Leann Ogasawara <[EMAIL PROTECTED]> > The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the > upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would > appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. > There are one of two ways you should be able to test: > > 1) If you are comfortable installing packages on your own, the linux- > image-2.6.27-* package is currently available for you to install and > test. > > --or-- > > 2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer > 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. > Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. > You should then be able to test via a LiveCD. > > Please let us know immediately if this newer 2.6.27 kernel resolves the > bug reported here or if the issue remains. More importantly, please > open a new bug report for each new bug/regression introduced by the > 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please > specifically note if the issue does or does not appear in the 2.6.26 > kernel. Thanks again, we really appreicate your help and feedback. > > ** Tags added: cft-2.6.27 > > -- > The computer is turned off just after the progress bar "Loading the Linux > kernel" reaches 100%. Debian Etch and Fedora Core 8 works fine. > https://bugs.launchpad.net/bugs/224052 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in "linux" source package in Ubuntu: New > > Bug description: > I'm trying to install Ubuntu 8.04 "Hardy Heron" - Release Candidate AMD64 > but the computer is turned off just after the progress bar "Loading the > Linux Kernel" reaches 100%. > > Hardware: > - Athlon 64 X2 4200 > - Motherboard Asus M2N-MX SE, with Geforce 6100. > - HD IDE ST3120022A in the same PATA channel of the DVD LG GSA-H22N > > I sucessfully installed the Debian Etch and run the lspci, with the > following output: > > debian:~# uname -a > Linux debian 2.6.18-6-486 #1 Sun Feb 10 22:06:33 UTC 2008 i686 GNU/Linux > > debian:~# lspci -v > 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: bus master, 66MHz, fast devsel, latency 0 > Capabilities: [44] HyperTransport: Slave or Primary Interface > Capabilities: [dc] HyperTransport: MSI Mapping > > 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: bus master, 66MHz, fast devsel, latency 0 > I/O ports at 0900 [size=256] > > 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: 66MHz, fast devsel, IRQ 10 > I/O ports at 0e00 [size=64] > I/O ports at 0600 [size=64] > I/O ports at 0700 [size=64] > Capabilities: [44] Power Management version 2 > > 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: 66MHz, fast devsel > > 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) > (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5 > Memory at dffff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > > 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) > (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11 > Memory at dfffec00 (32-bit, non-prefetchable) [size=256] > Capabilities: [44] Debug port > Capabilities: [80] Power Management version 2 > > 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if > 01 [Subtractive decode]) > Flags: bus master, 66MHz, fast devsel, latency 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Unknown device > 8234 > Capabilities: [8c] HyperTransport: MSI Mapping > > 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev > a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 8290 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10 > Memory at dfff8000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ > Queue=0/0 Enable- > Capabilities: [6c] HyperTransport: MSI Mapping > > 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a > [Master SecP PriP]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: bus master, 66MHz, fast devsel, latency 0 > I/O ports at ffa0 [size=16] > Capabilities: [44] Power Management version 2 > > 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 89 > Memory at dfffd000 (32-bit, non-prefetchable) [size=4K] > I/O ports at e480 [size=8] > Capabilities: [44] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ > Queue=0/3 Enable+ > Capabilities: [6c] HyperTransport: MSI Mapping > > 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) > (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device > 8234 > Capabilities: [48] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/1 Enable+ > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > > 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) > (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device > 8234 > Capabilities: [48] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/1 Enable+ > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > > 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) > (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device > 8234 > Capabilities: [48] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/1 Enable+ > Capabilities: [60] HyperTransport: MSI Mapping > Capabilities: [80] Express Root Port (Slot+) IRQ 0 > > 00:0d.0 VGA compatible controller: nVidia Corporation Unknown device 03d0 > (rev a2) (prog-if 00 [VGA]) > Subsystem: ASUSTeK Computer Inc. Unknown device 8234 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11 > Memory at de000000 (32-bit, non-prefetchable) [size=16M] > Memory at c0000000 (64-bit, prefetchable) [size=256M] > Memory at dd000000 (64-bit, non-prefetchable) [size=16M] > Expansion ROM at dffc0000 [disabled] [size=128K] > Capabilities: [48] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > Flags: fast devsel > Capabilities: [80] HyperTransport: Host or Secondary Interface > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > Flags: fast devsel > > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > DRAM Controller > Flags: fast devsel > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > Flags: fast devsel > Capabilities: [f0] #0f [0010] > > I've tried the following kernel options: > - noapic > - nolapic > - acpi=off > - irqpool > - From "http://bugzilla.kernel.org/show_bug.cgi?id=9184"; earlyprintk=vga > - All combinations off the above options. The results were the same. > Always. > > Already tried to change several in BIOS, with no change. > -- Abraços Christian -- The computer is turned off just after the progress bar "Loading the Linux kernel" reaches 100%. Debian Etch and Fedora Core 8 works fine. https://bugs.launchpad.net/bugs/224052 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
