numarrou a écrit : > en basculant en Alt+Ctrl+F1, le système finit par démarrer jusqu'à
l'interface de connexion utilisateur, puis jusqu'à gnome
du coup je peux vous faire passer le dmesg (si ça peut être parlant pour quelqu'un ...!?)
manu
[ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffdfffc (usable) [ 0.000000] BIOS-e820: 000000003ffdfffc - 000000003fffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000003fffffc0 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262111) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262111 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262111 [ 0.000000] On node 0 totalpages: 262111 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32480 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00E5010 checksum 0 [ 0.000000] ACPI: RSDP 000E5010, 0014 (r0 TOSINV) [ 0.000000] ACPI: RSDT 3FFF8A07, 0034 (r1 TOSINV RSDT_000 100 ABCD 10200) [ 0.000000] ACPI: FACP 3FFFFB30, 0074 (r1 TOSINV FACP_000 100 0000 10200) [ 0.000000] ACPI: DSDT 3FFF9050, 6AD7 (r1 TOSINV SONOMA 1004 INTL 2002036) [ 0.000000] ACPI: FACS 3FFFFFC0, 0040 [ 0.000000] ACPI: MCFG 3FFFFBC0, 003C (r1 INSYDE MCFG_000 30303030 0000 30303030) [ 0.000000] ACPI: SSDT 3FFF8BF5, 0237 (r1 PmRef Cpu0Ist 3000 INTL 20030522) [ 0.000000] ACPI: SSDT 3FFF8A3B, 01BA (r1 PmRef Cpu0Cst 3001 INTL 20030522) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff00000) [ 0.000000] Built 1 zonelists. Total pages: 260064 [ 0.000000] Kernel command line: root=UUID=e5a44be2-e6bc-4307-a90c-0152cd04443f ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0180f000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1729.072 MHz processor. [ 9.854041] Console: colour VGA+ 80x25 [ 9.854348] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 9.854759] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 9.886750] Memory: 1027568k/1048444k available (2015k kernel code, 20216k reserved, 916k data, 364k init, 130940k highmem) [ 9.886760] virtual kernel memory layout: [ 9.886761] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 9.886762] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 9.886764] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 9.886765] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 9.886766] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 9.886768] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 9.886769] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 9.886772] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.886807] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 9.966801] Calibrating delay using timer specific routine.. 3461.64 BogoMIPS (lpj=6923299) [ 9.966825] Security Framework v1.0.0 initialized [ 9.966832] SELinux: Disabled at boot. [ 9.966845] Mount-cache hash table entries: 512 [ 9.966961] CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000 [ 9.966973] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.966975] CPU: L2 cache: 2048K [ 9.966978] CPU: After all inits, caps: afe9f9ff 00000000 00000000 00002040 00000180 00000000 00000000 [ 9.966987] Compat vDSO mapped to ffffe000. [ 9.966997] Checking 'hlt' instruction... OK. [ 9.982887] SMP alternatives: switching to UP code [ 9.983051] Freeing SMP alternatives: 11k freed [ 9.983298] Early unpacking initramfs... done [ 10.330584] ACPI: Core revision 20070126 [ 10.330658] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 10.333297] ACPI: setting ELCR to 0200 (from 0c20) [ 10.358220] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [ 10.358227] SMP motherboard not detected. [ 10.358229] Local APIC not detected. Using dummy APIC emulation. [ 10.358261] Brought up 1 CPUs [ 10.358365] Booting paravirtualized kernel on bare hardware [ 10.358432] Time: 23:32:06 Date: 00/09/108 [ 10.358454] NET: Registered protocol family 16 [ 10.358531] EISA bus registered [ 10.358552] ACPI: bus type pci registered [ 10.358601] PCI: PCI BIOS revision 2.10 entry at 0xea934, last bus=6 [ 10.358603] PCI: Using configuration type 1 [ 10.358605] Setting up standard PCI resources [ 10.361076] ACPI: EC: Look up EC in DSDT [ 10.367096] ACPI: EC: GPE=0x10, ports=0x66, 0x62 [ 10.371989] ACPI: Interpreter enabled [ 10.371992] ACPI: (supports S0 S3 S4 S5) [ 10.372008] ACPI: Using PIC for interrupt routing [ 10.389494] ACPI: EC: GPE=0x10, ports=0x66, 0x62 [ 10.389537] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.389545] PCI: Probing PCI hardware (bus 00) [ 10.390198] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 10.390202] PCI quirk: region 1300-133f claimed by ICH6 GPIO [ 10.391070] PCI: Transparent bridge - 0000:00:1e.0 [ 10.391189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.391563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 10.391726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 10.391884] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 10.392058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 10.418797] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11) [ 10.418893] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 10.418986] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11) [ 10.419078] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 10.419171] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11) [ 10.419262] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled. [ 10.419392] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11 [ 10.419484] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11 [ 10.419611] ACPI: Power Resource [PFA1] (off) [ 10.419619] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.419627] pnp: PnP ACPI init [ 10.419637] ACPI: bus type pnp registered [ 10.427809] pnp: PnP ACPI: found 9 devices [ 10.427811] ACPI: ACPI bus type pnp unregistered [ 10.427815] PnPBIOS: Disabled by ACPI PNP [ 10.427851] PCI: Using ACPI for IRQ routing [ 10.427854] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 10.427887] PCI: Cannot allocate resource region 0 of device 0000:06:06.0 [ 10.437776] NET: Registered protocol family 8 [ 10.437778] NET: Registered protocol family 20 [ 10.437818] pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 10.437822] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 10.437825] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 10.437828] pnp: 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 10.437834] pnp: 00:05: iomem range 0xe0000000-0xefffffff has been reserved [ 10.437837] pnp: 00:05: iomem range 0xf0008000-0xf000bfff has been reserved [ 10.437840] pnp: 00:05: iomem range 0xfed14000-0xfed17fff has been reserved [ 10.437843] pnp: 00:05: iomem range 0xfed18000-0xfed18fff has been reserved [ 10.438528] Time: tsc clocksource has been installed. [ 10.468096] PCI: Bridge: 0000:00:01.0 [ 10.468099] IO window: c000-dfff [ 10.468102] MEM window: c0000000-cfffffff [ 10.468106] PREFETCH window: 90000000-9fffffff [ 10.468109] PCI: Bridge: 0000:00:1c.0 [ 10.468112] IO window: a000-bfff [ 10.468118] MEM window: bc000000-bfffffff [ 10.468122] PREFETCH window: 8c000000-8fffffff [ 10.468128] PCI: Bridge: 0000:00:1c.1 [ 10.468131] IO window: 8000-9fff [ 10.468137] MEM window: b8000000-bbffffff [ 10.468142] PREFETCH window: 88000000-8bffffff [ 10.468153] PCI: Bus 7, cardbus bridge: 0000:06:06.0 [ 10.468155] IO window: 00006000-000060ff [ 10.468161] IO window: 00006400-000064ff [ 10.468166] PREFETCH window: 80000000-83ffffff [ 10.468172] MEM window: b4000000-b7ffffff [ 10.468176] PCI: Bridge: 0000:00:1e.0 [ 10.468179] IO window: 6000-7fff [ 10.468185] MEM window: b0000000-b7ffffff [ 10.468190] PREFETCH window: 80000000-87ffffff [ 10.468351] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 10.468353] PCI: setting IRQ 11 as level-triggered [ 10.468358] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 10.468364] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 10.468522] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 10.468524] PCI: setting IRQ 10 as level-triggered [ 10.468529] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 10.468536] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 10.468557] ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 10.468563] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 10.468576] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 10.468729] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 10.468731] ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 10.468746] NET: Registered protocol family 2 [ 10.506529] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 10.506584] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 10.507714] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 10.508266] TCP: Hash tables configured (established 131072 bind 65536) [ 10.508269] TCP reno registered [ 10.518657] checking if image is initramfs... it is [ 10.970365] Switched to high resolution mode on CPU 0 [ 11.200917] Freeing initrd memory: 7340k freed [ 11.201236] audit: initializing netlink socket (disabled) [ 11.201251] audit(1199921527.032:1): initialized [ 11.201322] highmem bounce pool size: 64 pages [ 11.203065] VFS: Disk quotas dquot_6.5.1 [ 11.203110] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.203198] io scheduler noop registered [ 11.203201] io scheduler anticipatory registered [ 11.203203] io scheduler deadline registered [ 11.203218] io scheduler cfq registered (default) [ 11.203297] Boot video device is 0000:01:00.0 [ 11.203378] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 11.203406] assign_interrupt_mode Found MSI capability [ 11.203409] Allocate Port Service[0000:00:01.0:pcie00] [ 11.203478] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 11.203529] assign_interrupt_mode Found MSI capability [ 11.203532] Allocate Port Service[0000:00:1c.0:pcie00] [ 11.203560] Allocate Port Service[0000:00:1c.0:pcie02] [ 11.203648] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 11.203699] assign_interrupt_mode Found MSI capability [ 11.203702] Allocate Port Service[0000:00:1c.1:pcie00] [ 11.203729] Allocate Port Service[0000:00:1c.1:pcie02] [ 11.203875] isapnp: Scanning for PnP cards... [ 11.557891] isapnp: No Plug & Play device found [ 11.580371] Real Time Clock Driver v1.12ac [ 11.580479] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 11.581297] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 [ 11.581300] PCI: setting IRQ 5 as level-triggered [ 11.581305] ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 [ 11.581315] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 11.581826] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 11.581995] input: Macintosh mouse button emulation as /class/input/input0 [ 11.582112] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 11.586441] i8042.c: Detected active multiplexing controller, rev 1.1. [ 11.589659] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.589664] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 11.589667] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 11.589669] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 11.589672] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 11.589831] mice: PS/2 mouse device common for all mice [ 11.590137] EISA: Probing bus 0 at eisa.0 [ 11.590145] Cannot allocate resource for EISA slot 1 [ 11.590161] Cannot allocate resource for EISA slot 6 [ 11.590163] Cannot allocate resource for EISA slot 7 [ 11.590166] Cannot allocate resource for EISA slot 8 [ 11.590168] EISA: Detected 0 cards. [ 11.590258] TCP cubic registered [ 11.590273] NET: Registered protocol family 1 [ 11.590296] Using IPI No-Shortcut mode [ 11.590466] Magic number: 8:562:554 [ 11.590522] hash matches device ptya0 [ 11.590587] hash matches device PNP0C0F:05 [ 11.590767] Freeing unused kernel memory: 364k freed [ 11.634220] input: AT Translated Set 2 keyboard as /class/input/input1 [ 12.770704] AppArmor: AppArmor initialized<5>audit(1199921528.532:2): type=1505 info="AppArmor initialized" pid=1214 [ 12.792074] fuse init (API version 7.8) [ 12.892435] Failure registering capabilities with primary security module. [ 12.992577] ACPI: Transitioning device [FAN1] to D3 [ 12.992580] ACPI: Transitioning device [FAN1] to D3 [ 12.992583] ACPI: Fan [FAN1] (off) [ 13.096565] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.096571] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.096581] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 13.349382] ACPI: Thermal Zone [TZCR] (65 C) [ 13.357366] ACPI: Thermal Zone [TZVR] (56 C) [ 13.365363] ACPI: Thermal Zone [TZVL] (52 C) [ 13.373359] ACPI: Thermal Zone [TZCL] (44 C) [ 23.659986] usbcore: registered new interface driver usbfs [ 23.660009] usbcore: registered new interface driver hub [ 23.660026] usbcore: registered new device driver usb [ 23.660738] USB Universal Host Controller Interface driver v3.0 [ 23.661021] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 23.661024] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 23.661035] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.661039] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.661215] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 23.661245] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 [ 23.661349] usb usb1: configuration #1 chosen from 1 choice [ 23.661371] hub 1-0:1.0: USB hub found [ 23.661377] hub 1-0:1.0: 2 ports detected [ 23.764980] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 23.764983] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 23.764992] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.764996] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.765016] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 23.765042] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220 [ 23.765128] usb usb2: configuration #1 chosen from 1 choice [ 23.765154] hub 2-0:1.0: USB hub found [ 23.765159] hub 2-0:1.0: 2 ports detected [ 23.868775] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 23.868789] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.868793] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.868818] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 23.868845] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240 [ 23.868936] usb usb3: configuration #1 chosen from 1 choice [ 23.868960] hub 3-0:1.0: USB hub found [ 23.868966] hub 3-0:1.0: 2 ports detected [ 23.941881] SCSI subsystem initialized [ 23.946836] libata version 2.21 loaded. [ 23.972742] ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 23.972755] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 23.972759] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 23.972781] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 23.972808] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260 [ 23.972901] usb usb4: configuration #1 chosen from 1 choice [ 23.972931] hub 4-0:1.0: USB hub found [ 23.972937] hub 4-0:1.0: 2 ports detected [ 24.004629] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 24.077030] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) [ 24.077036] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 24.077049] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 24.077053] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 24.077076] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 24.077110] ehci_hcd 0000:00:1d.7: debug port 1 [ 24.077117] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 24.077123] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000 [ 24.120604] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 24.120730] usb usb5: configuration #1 chosen from 1 choice [ 24.120756] hub 5-0:1.0: USB hub found [ 24.120764] hub 5-0:1.0: 8 ports detected [ 24.226625] ata_piix 0000:00:1f.2: version 2.11 [ 24.226633] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 24.380475] ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 24.380509] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 24.380583] scsi0 : ata_piix [ 24.380630] scsi1 : ata_piix [ 24.380735] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011100 irq 14 [ 24.380739] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011108 irq 15 [ 24.528388] usb 1-1: device not accepting address 2, error -71 [ 24.544771] ata1.00: ATA-6: TOSHIBA MK8032GSX, AS111G, max UDMA/100 [ 24.544774] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 24.552755] ata1.00: configured for UDMA/100 [ 24.872721] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.00, max UDMA/33 [ 25.012181] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 25.044666] ata2.00: configured for UDMA/33 [ 25.052172] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GS AS11 PQ: 0 ANSI: 5 [ 25.054068] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.00 PQ: 0 ANSI: 5 [ 25.056179] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6 [ 25.056183] PCI: setting IRQ 6 as level-triggered [ 25.056188] ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6 [ 25.106136] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[b0000000-b00007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 25.120146] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 25.124135] sd 0:0:0:0: [sda] Write Protect is off [ 25.124137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.132121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.140117] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 25.144116] sd 0:0:0:0: [sda] Write Protect is off [ 25.144118] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.144738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.144742] sda: sda1 sda2 < sda5 sda6<6>usb 1-1: configuration #1 chosen from 1 choice [ 25.222160] sda7<6>usbcore: registered new interface driver hiddev [ 25.234386] sda8<6>input: Logitech Optical USB Mouse as /class/input/input2 [ 25.247148] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1 [ 25.247157] usbcore: registered new interface driver usbhid [ 25.247160] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 25.247813] sda9 > [ 25.248669] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.253276] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.253397] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 25.269078] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 25.269083] Uniform CD-ROM driver Revision: 3.20 [ 25.269236] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 26.375676] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d128e314] [ 26.754838] Attempting manual resume [ 26.754841] swsusp: Resume From Partition 8:5 [ 26.754843] PM: Checking swsusp image. [ 26.851366] PM: Resume from disk failed. [ 27.559093] kjournald starting. Commit interval 5 seconds [ 27.559101] EXT3-fs: mounted filesystem with ordered data mode. [ 59.608000] Marking TSC unstable due to: possible TSC halt in C2. [ 59.612000] Time: acpi_pm clocksource has been installed. [ 60.060000] Clocksource tsc unstable (delta = -459929261 ns) [ 64.844000] Linux agpgart interface v0.102 (c) Dave Jones [ 64.856000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 64.860000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 65.968000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 65.968000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 65.968000] sky2 0000:02:00.0: v1.18 addr 0xbc000000 irq 11 Yukon-FE (0xb7) rev 1 [ 65.968000] sky2 eth0: addr 00:a0:d1:28:e3:14 [ 65.968000] intel_rng: FWH not detected [ 66.048000] Yenta: CardBus bridge found at 0000:06:06.0 [1179:ff10] [ 66.048000] Yenta: Enabling burst memory read transactions [ 66.048000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 66.048000] Yenta: Routing CardBus interrupts to PCI [ 66.048000] Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b22, devctl 0x66 [ 66.064000] ieee80211_crypt: registered algorithm 'NULL' [ 66.076000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 66.076000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> [ 66.144000] iTCO_vendor_support: vendor-support=0 [ 66.144000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 66.144000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 66.144000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 66.280000] Yenta: ISA IRQ mask 0x0098, PCI irq 11 [ 66.280000] Socket status: 30000006 [ 66.280000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a [ 66.280000] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff [ 66.280000] cs: IO port probe 0x6000-0x7fff: clean. [ 66.280000] pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff [ 66.280000] pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff [ 66.408000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 66.408000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 66.408000] ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 66.408000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 66.676000] sdhci: Secure Digital Host Controller Interface driver [ 66.676000] sdhci: Copyright(c) Pierre Ossman [ 67.048000] ipw2200: Radio Frequency Kill Switch is On: [ 67.048000] Kill switch must be turned off for wireless networking to work. [ 67.048000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 67.048000] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0) [ 67.048000] ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 67.048000] mmc0: SDHCI at 0xb000a000 irq 11 DMA [ 67.048000] mmc1: SDHCI at 0xb000a100 irq 11 DMA [ 67.048000] mmc2: SDHCI at 0xb000a200 irq 11 DMA [ 67.048000] ACPI: PCI Interrupt 0000:06:06.3[D] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 [ 67.128000] cs: IO port probe 0x100-0x3af: excluding 0x300-0x307 0x310-0x31f [ 67.128000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 67.128000] cs: IO port probe 0x820-0x8ff: clean. [ 67.132000] cs: IO port probe 0xc00-0xcf7: clean. [ 67.132000] cs: IO port probe 0xa00-0xaff: clean. [ 67.188000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 67.188000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 67.276000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0 [ 67.276000] synaptics: Toshiba Satellite M40 detected, limiting rate to 40pps. [ 67.336000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 68.112000] intel8x0_measure_ac97_clock: measured 55477 usecs [ 68.112000] intel8x0: clocking to 48000 [ 68.704000] lp: driver loaded but no devices found [ 68.768000] Adding 1092380k swap on /dev/sda5. Priority:-1 extents:1 across:1092380k [ 69.680000] EXT3 FS on sda6, internal journal [ 94.252000] kjournald starting. Commit interval 5 seconds [ 94.252000] EXT3 FS on sda7, internal journal [ 94.252000] EXT3-fs: mounted filesystem with ordered data mode. [ 94.276000] kjournald starting. Commit interval 5 seconds [ 94.276000] EXT3 FS on sda8, internal journal [ 94.276000] EXT3-fs: mounted filesystem with ordered data mode. [ 94.296000] kjournald starting. Commit interval 5 seconds [ 94.296000] EXT3 FS on sda9, internal journal [ 94.296000] EXT3-fs: mounted filesystem with ordered data mode. [ 95.624000] ACPI: Battery Slot [BAT1] (battery present) [ 95.652000] ACPI: Error installing notify handler [ 95.652000] Device 'dock.0' does not have a release() function, it is broken and must be fixed. [ 95.652000] WARNING: at /build/buildd/linux-source-2.6.22-2.6.22/drivers/base/core.c:107 device_release() [ 95.652000] [<c01fa168>] kobject_cleanup+0x48/0x80 [ 95.652000] [<c01fa1a0>] kobject_release+0x0/0x10 [ 95.652000] [<c01faf9b>] kref_put+0x2b/0xa0 [ 95.652000] [<c0262c50>] platform_device_del+0x10/0x60 [ 95.652000] [<f8bd6791>] find_dock+0x1ef/0x219 [dock] [ 95.652000] [<c022ace6>] acpi_ns_walk_namespace+0x102/0x11c [ 95.652000] [<c02294e0>] acpi_walk_namespace+0x57/0x74 [ 95.652000] [<f8bd65a2>] find_dock+0x0/0x219 [dock] [ 95.652000] [<f8b2903c>] dock_init+0x3c/0x55 [dock] [ 95.652000] [<f8bd65a2>] find_dock+0x0/0x219 [dock] [ 95.652000] [<c014a7d1>] sys_init_module+0x151/0x1a00 [ 95.652000] [<c01fb39f>] prio_tree_insert+0x1f/0x250 [ 95.652000] [<c01041d2>] sysenter_past_esp+0x6b/0xa9 [ 95.652000] ======================= [ 95.652000] No dock devices found. [ 95.728000] input: Power Button (FF) as /class/input/input4 [ 95.732000] ACPI: Power Button (FF) [PWRF] [ 95.776000] input: Lid Switch as /class/input/input5 [ 95.780000] ACPI: Lid Switch [LID0] [ 95.824000] input: Power Button (CM) as /class/input/input6 [ 95.828000] ACPI: Power Button (CM) [PWRB] [ 95.848000] ACPI: AC Adapter [AC] (on-line) [ 96.948000] ppdev: user-space parallel port driver [ 97.048000] sky2 eth0: enabling interface [ 97.236000] audit(1199918023.548:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5162 profile="/usr/sbin/cupsd" [ 97.284000] apm: BIOS not found. [ 97.652000] Failure registering capabilities with primary security module. [ 97.816000] Bluetooth: Core ver 2.11 [ 97.816000] NET: Registered protocol family 31 [ 97.816000] Bluetooth: HCI device and connection manager initialized [ 97.816000] Bluetooth: HCI socket layer initialized [ 97.840000] Bluetooth: L2CAP ver 2.8 [ 97.840000] Bluetooth: L2CAP socket layer initialized [ 97.892000] Bluetooth: RFCOMM socket layer initialized [ 97.892000] Bluetooth: RFCOMM TTY layer initialized [ 97.892000] Bluetooth: RFCOMM ver 1.8 [ 99.184000] [drm] Initialized drm 1.1.0 20060810 [ 99.192000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 99.196000] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 100.032000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 102.244000] NET: Registered protocol family 17 [ 102.328000] [drm] Setting GART location based on new memory map [ 102.328000] [drm] Loading R300 Microcode [ 102.328000] [drm] writeback test succeeded in 1 usecs [ 105.308000] NET: Registered protocol family 10 [ 105.308000] lo: Disabled Privacy Extensions [ 105.308000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 115.344000] eth0: no IPv6 routers present
-- ubuntu-fr mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
