Mohand a écrit :
le fichier se nomme menu.lst,
Tu peux corriger les chemins des commandes :
sudo cp /boot/grub/menu.lst /boot/grub/menu.lst.orig
et
sudo gedit /boot/grub/menu.lst
Bravo lea et un grand merci à tous. J'espère ne pas avoir trop
monopolisé la boîte! J'ai mis Résolu: Livebox et 2pc Ethernet, est-ce
que ça suffira?
Merci encore
Et re bonjour,
J'étais tellement content hier ou avant hier (je ne sais plus!) que j'ai mis
aussitôt Résolu. Et bien non, ça recommence!!!J'ai donc profité de cette
nouvelle panne (deconnexion internet) pour tester les Ping dans Outils-réseau.
Le ping localhost est très très lent: ( La fenêtre se grise pendant quelques
instants) pour pomper de l'énergie je pense, celui du 121.0.0.1 ne répond pas
du tout, par contre le 127.0.0.1 répond beaucoup plus rapidement. Voici le
dmesg_fail. Le problème n'est pas résolu, mais moi je le suis. Faudra juste me
dire ce que je dois vous fournir ou faire, pour y arriver.
Merci
[ 18.789538] Driver 'sd' needs updating - please use bus_type methods
[ 18.789745] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 19.348709] eth0: VIA Rhine II at 0xf8fff800, 00:1a:92:11:5b:be, IRQ 21.
[ 19.349421] eth0: MII PHY found at address 1, status 0x786d advertising 01e1
Link 45e1.
[ 29.923249] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 45.165747] eth0: no IPv6 routers present
[ 48.135597] hda-intel: Invalid position buffer, using LPIB read method
instead.
[ 1331.128035] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 1341.495322] eth0: no IPv6 routers present
[ 7539.139809] NETDEV WATCHDOG: eth0: transmit timed out
[ 7539.139963] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7539.140641] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7599.117039] NETDEV WATCHDOG: eth0: transmit timed out
[ 7599.117201] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7599.117864] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7615.110971] NETDEV WATCHDOG: eth0: transmit timed out
[ 7615.111122] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7615.111789] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7633.104136] NETDEV WATCHDOG: eth0: transmit timed out
[ 7633.104288] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7633.104955] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7649.098066] NETDEV WATCHDOG: eth0: transmit timed out
[ 7649.098218] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7649.098885] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7665.092005] NETDEV WATCHDOG: eth0: transmit timed out
[ 7665.092157] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7665.092825] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7683.085171] NETDEV WATCHDOG: eth0: transmit timed out
[ 7683.085322] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7683.085993] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7699.079102] NETDEV WATCHDOG: eth0: transmit timed out
[ 7699.079255] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7699.079924] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7793.043435] NETDEV WATCHDOG: eth0: transmit timed out
[ 7793.043587] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7793.044252] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7821.032812] NETDEV WATCHDOG: eth0: transmit timed out
[ 7821.032963] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7821.033624] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 7837.026749] NETDEV WATCHDOG: eth0: transmit timed out
[ 7837.026902] eth0: Transmit timed out, status 0003, PHY status 786d,
resetting...
[ 7837.027648] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
--
ubuntu-fr mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
