suite erreur de frappe ,avec mes excuses
--- Begin Message ---
The original message was received at Wed, 15 Apr 2009 08:17:49 +0400
from pub28-185.mobius.fr [78.108.228.185]
----- The following addresses had permanent fatal errors -----
<"; ubuntu-fr"@lists.ubuntu.com>
(reason: 550 unknown user)
----- Transcript of session follows -----
... while talking to lists.ubuntu.com.:
>>> DATA
<<< 550 unknown user
550 5.1.1 <"; ubuntu-fr"@lists.ubuntu.com>... User unknown
<<< 503 valid RCPT command must precede DATA
Reporting-MTA: dns; smtp.izi
Arrival-Date: Wed, 15 Apr 2009 08:17:49 +0400
Final-Recipient: RFC822; "; ubuntu-fr"@lists.ubuntu.com
Action: failed
Status: 5.1.1
Remote-MTA: DNS; lists.ubuntu.com
Diagnostic-Code: SMTP; 550 unknown user
Last-Attempt-Date: Wed, 15 Apr 2009 08:18:01 +0400
--- Begin Message ---
Bonjour,
ce message est un peu long je m'en excuse ,j'ai éssayé d'être aussi
clair que possible.
Carte graphique: nvidia Gforce G0 7600 sur portable Toshiba.
Ubuntu 8.10 installé à partir d'un live cd "LinuxMint 6".
Ecran : ecran externe ASUS VW193D 19 " sur sortie VGA remplaçant l'écran
du portable HS.
Installation sans pb, tout fonctionne sauf la 3D.
j'ai noté : que le driver nvidia 177 recommandé ne fonctionne pas.
j'ai installé nvidia 173 (via synaptic).
en "live" la 3D semble fonctionner( le screensaver des grille pains est
ok).
la commande "compiz-check" renvoie tout ok.
le xorg.conf en piece jointe a été genéré par :"nvidia-xconfig"
Malgré toutes mes recherches et lecture je ne comprend pas ce qui
cloche.
Pouvez vous m'aider? je vous remercie par avance.
jacques
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeis...@builder57) Wed Nov 26 11:27:46
PST 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard" "CoreKeyboard"
InputDevice "Configured Mouse" "CorePointer"
InputDevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
VendorName "ACI ASUS LCD Display"
ModelName "ACI ASUS VW193D"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Gamma 1
ModeLine "800x...@56" 36.0 800 824 896 1024 600 601 603 625 +hsync
+vsync
ModeLine "800x...@60" 40.0 800 840 968 1056 600 601 605 628 +hsync
+vsync
ModeLine "1280x...@60" 80.14 1280 1344 1480 1680 768 769 772 795
-hsync +vsync
ModeLine "1280x...@60" 74.48 1280 1336 1472 1664 720 721 724 746
-hsync +vsync
ModeLine "1280x...@60" 83.46 1280 1344 1480 1680 800 801 804 828
-hsync +vsync
ModeLine "1440x...@60" 106.47 1440 1520 1672 1904 900 901 904 932
-hsync +vsync
EndSection
Section "Monitor"
Identifier "monitor1"
Gamma 1
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 7 Series"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "device1"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 7 Series"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
Option "DPMS" "true"
Option "TwinView" "true"
Option "ConnectedMonitor" "CRT-0 , DFP-0"
Option "TwinViewOrientation" "Clone"
Option "NoLogo" "True"
SubSection "Display"
Virtual 1440 900
Depth 24
Modes "1440x...@60" "1280x...@60" "1280x...@60" "1280x...@60"
"800x...@60" "800x...@56"
EndSubSection
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
--- End Message ---
--- End Message ---
--
ubuntu-fr mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
