oui alors voilà le résultat: dmesg | tail -15 [18896.674061] VFS: busy inodes on changed media or resized disk sr0 [18898.672702] VFS: busy inodes on changed media or resized disk sr0 [18898.675224] VFS: busy inodes on changed media or resized disk sr0 [18900.835138] VFS: busy inodes on changed media or resized disk sr0 [18900.962721] VFS: busy inodes on changed media or resized disk sr0 [18902.835316] VFS: busy inodes on changed media or resized disk sr0 [18902.962946] VFS: busy inodes on changed media or resized disk sr0 [18904.835424] VFS: busy inodes on changed media or resized disk sr0 [18904.963146] VFS: busy inodes on changed media or resized disk sr0 [18906.836792] VFS: busy inodes on changed media or resized disk sr0 [18906.963231] VFS: busy inodes on changed media or resized disk sr0 [18908.675480] VFS: busy inodes on changed media or resized disk sr0 [19102.945761] usb 1-8: USB disconnect, address 7 [19791.692061] usb 1-8: new high speed USB device using ehci_hcd and address 8 [19791.831935] usb 1-8: configuration #1 chosen from 1 choice
et de le cde: sane-find-scanner sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x4505 [HP Scanjet G4000 Photo series], chip=GL843) at libusb:001:008 found USB scanner (vendor=0x041e, product=0x400c) at libusb:002:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. Je te remercie de la rapidité -- ubuntu-fr mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
