Hi Navdeep am top posting because this is an indirect reply to you issue
have posted a separate detailed mail on this issue , just now please see that it should help with your problems ram On Sat, Jul 9, 2011 at 3:52 AM, Navdeep Singh Sidhu <[email protected]> wrote: > > > i have Dell Xps 15 with config:- > 8 Gb RAM > 2nd generation i7 processor 2.2 GHz Boost 2.0 upto 3.30 GHz > Dual Graphics Card Intel HD 3000 & nvidia geforce GT 540M with Optimus > Techonology > 720 GB hardisk > Motherboard Dell XPS system L502X > Intel centrino 6230 Network Card with BT 3.0 > > I have installed 2 linux distro on my External USB portable seagate 500 GB > hardisk fedora 15 & Ubuntu 11.04. i have installed these distro by using HP > pavilion dv 2762 tx with config:- > > Core2duo 1.83Ghz > 2Gb ram > nvidia geforce 9600m graphics card > > Both these distro works with all other older laptops Like HP, Dell studio 1 > yr old config , Compaq 5 yr old, but not on my Dell XPS 15. > To check my laptops hardware compatibility i used a Ubuntu 10.10 live Cd. it > works fine . i use this cd as a live media but when i tried same Ubuntu > 10.10 on live usb it gives blank screen or error which i mentioned below. > To check that my iso file damaged or my download has been corrupted or not, > i tried different distros with different desktop enviornment like > Gnome,KDE,Xcfe & Lxde. i tried fedora 15, ubuntu 10.10, ubuntu 10.04, ubuntu > 11.04. slackware,eduboss each with avail flavors. > But all i have tried gives almost same error with each distro. i don't know > what is this some kind of bug or lack of support with dell chipset > (hardware). if live cd boots well then i think there is nohardware > compatibility issue with linux. I think this is lack of usb support because > may be Linux has no support until now for latest motherboards or hardware > architects. > > These are the errors i got with different distros. i am not able to figure > out what's going on bcz i'm rookie in Linux programming. But if anyone can > do it, plz help me i haven't run my linux from previous 1 and half month and > i'm a linux addicted. > starting from Fedora 15 gnome(almost same for kde except starting numbers) > > error:- > [ 2.571729] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED > [ 2.571847] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED > > Dropping to debug shell. > sh.can't acess tty:job control off > dracut:/# > > > Fedora 15 LXDE > > [ 2.514402] nonveau 0000:01:00.0:invalid ROM contents > [ 2.614971] [drm] nonveau 0000:01:00.0:POINTER to BIT load vol table > invalid > [ 2.639331] [drm] nonveau 0000:01:00.0:0xd518:12cwr fail: -6 > [ 2.75332] [drm] nonveau 0000:01:00.0:PGRAPH:unsupported chipset,please > report! > [ 2.753646] [drm] nonveau 0000:01:00.0:PGRAPH:unknown config:2/0/0/0,1 > [ 2.755342] [drm] nonveau 0000:01:00.0: failed to load fuc 409 d > > > [ 2.919340] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED > [ 2.919447] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED > > Dropping to debug shell. > sh.can't acess tty:job control off > dracut:/# > > > Fedora 15 XCFE > > [ 2.563563] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED > [ 2.563680] [drm:intel_drm_platform_mux_info] *ERROR* MUX INFO CALL FAILED > > Dropping to debug shell. > sh.can't acess tty:job control off > dracut:/# > > > EDUBOSS (Debian derivative) (I apologize but i have write the full error i > got bcz may be it helps somebody to find what's going on) > > BOOT FAILED ! > The debian live image failed to boot. Please file a bug against the > 'live-initramfs' package or email the debian Live mailing list at > <[email protected]> make sure to note the exact version, name and > distribution of the image you were attempt to boot. > > The file /live.log contains same debugging information but booting with > debug command line parameter will greatly increase it's verbosity which is > extremely useful when diagnosing issues. > > live-initramfs will start a shell. > The error message was: Unable to find a medium containing a live file > system. > > Busy Box v.1.10.2 (Debian 1:1.10.2-2) built in shell (ash) > > Enter 'help' for a list of built in commands. > > <bin/sh:can't access tty:job control turned off (initramfs)- > > > > Ubuntu 11.04 Gnome > > Black screen nothing. > > > Ubuntu 10.10 & 10.04 gnome (Both gave same error "Backtrack 5 also" bcz it > is ubuntu 10.04 based distro) > > GLIB_________________________(some kind of error i could note bcz it stays > for few seconds) > stdin:error0 > /init:line7:can't open /dev/sr0:no medium found > /init:line7:can't open /dev/sr0:no medium found > same error repeating > > > I also tried to check disc for error option but same error as above . > > Slackware > > Bcz it's command line it has direct option of installation no live media. > I have created live usb using unetbootin latest version. if i get any > update regarding problem soon i'll release it's second version. lolz!!! > > Regards > Navdeep Singh > > > -- > ubuntu-in mailing list > [email protected] > https://lists.ubuntu.com/mailman/listinfo/ubuntu-in > > -- Ram _________________________________________________________ http://www.munsiari.com -- ubuntu-in mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-in
