With a quick pointer from Jeremy Morales, I'm now able to brunch, getting hung up with the following error:
make: *** No rule to make target `/home/jcoombs/encore/out/host/linux-x86/bin/mkimage', needed by `/home/jcoombs/encore/out/target/product/encore/ramdisk.ub'. Stop. Currently grepping/googling as I'm sure this too is an easy/obvious fix but I haven't stumbled upon it yet. Josh C On Mon, Mar 4, 2013 at 9:06 PM, Josh Coombs <[email protected]> wrote: > Seeing as no one has reported success or failure yet, I decided to > give this a try based on the basic porting instructions. > > First some basic notes for those unfamiliar with the Nook Color. The > biggie, it comes unlocked out of the crate. If you insert a micro-sd > card with the correct partition layout and uboot setup, it'll boot > from it rather than the local flash, no mods required. In the past > someone managed to mangle together an android kernel with full Ubuntu > desktop userland using this and got a semi-working setup but sadly > never pursued it. Anyways, it's an OMAP 3 series cpu with 512MB RAM, > and a 1024x600 display. No GPS, BT is working but there isn't an > antenna wired to it so the range is very limited, no cellular support. > Officially CM supports CM7 and CM10, the community has CM10.1 up and > running unofficially which I use. Current kernel is 3.0.8. > > Following the guide I setup a dev environment inside a chroot on my 12.10 box. > > First step after phablet-dev-bootstrap fills my volume with src is to > enable the new device. Because CM10.1 isn't directly supported I > added the current official repositories to my manifest as below: > > <project path="device/bn/encore" > name="CyanogenMod/android_device_bn_encore" remote="github" > revision="refs/heads/jellybean" /> > <project path="kernel/bn/encore" > name="CyanogenMod/android_kernel_bn_encore" remote="github" > revision="refs/heads/encore-omap3-3" /> > > Binary blobs were extracted, init.encore.rc and ramdisk_tools.sh were > modified to remove nosuid from any mounts. encore_defconfig was > modded as required. main.mk modded as directed. This leads up to > trying brunch, which fails. > > CHROOT jcoombs@Colossus:~/encore$ brunch encore > including vendor/cm/vendorsetup.sh > build/core/config.mk:160: *** TARGET_ARCH not defined by board config: > device/bn/encore/BoardConfig.mk. Stop. > Device encore not found. Attempting to retrieve device repository from > CyanogenMod Github (http://github.com/CyanogenMod). > Found repository: android_device_bn_encore > Default revision: phablet-10.1 > Checking branch info > Default revision phablet-10.1 not found in android_device_bn_encore. Bailing. > Branches found: > gb-release-7.2 > gingerbread > gingerbread-release > jellybean > Use the ROOMSERVICE_BRANCHES environment variable to specify a list of > fallback branches. > build/core/config.mk:160: *** TARGET_ARCH not defined by board config: > device/bn/encore/BoardConfig.mk. Stop. > > ** Don't have a product spec for: 'cm_encore' > ** Do you have the right repo manifest? > > No such item in brunch menu. Try 'breakfast' > CHROOT jcoombs@Colossus:~/encore$ export ROOMSERVICE_BRANCHES=jellybean > CHROOT jcoombs@Colossus:~/encore$ brunch encore > including vendor/cm/vendorsetup.sh > build/core/config.mk:160: *** TARGET_ARCH not defined by board config: > device/bn/encore/BoardConfig.mk. Stop. > Device encore not found. Attempting to retrieve device repository from > CyanogenMod Github (http://github.com/CyanogenMod). > Found repository: android_device_bn_encore > Default revision: phablet-10.1 > Checking branch info > Using fallback branch: jellybean > Adding dependency: CyanogenMod/android_device_bn_encore -> device/bn/encore > Syncing repository to retrieve project. > warning: local_manifest.xml is deprecated; put local manifests in > `/home/jcoombs/encore/.repo/local_manifests` instead > warning: local_manifest.xml is deprecated; put local manifests in > `/home/jcoombs/encore/.repo/local_manifests` instead > fatal: duplicate project CyanogenMod/android_device_bn_encore in > /home/jcoombs/encore/.repo/manifest.xml > Repository synced! > Looking for dependencies > Adding dependencies to manifest > Adding dependency: CyanogenMod/android_kernel_bn_encore -> kernel/bn/encore > Syncing dependencies > warning: local_manifest.xml is deprecated; put local manifests in > `/home/jcoombs/encore/.repo/local_manifests` instead > warning: local_manifest.xml is deprecated; put local manifests in > `/home/jcoombs/encore/.repo/local_manifests` instead > fatal: duplicate project CyanogenMod/android_device_bn_encore in > /home/jcoombs/encore/.repo/manifest.xml > Done > build/core/config.mk:160: *** TARGET_ARCH not defined by board config: > device/bn/encore/BoardConfig.mk. Stop. > > ** Don't have a product spec for: 'cm_encore' > ** Do you have the right repo manifest? > > No such item in brunch menu. Try 'breakfast' > > That's where I'm currently at. I'm going to try tracking down the > community CM10.1 repos to see if those improve things next. So not a > spectacular start, but at least the next person looking for nook color > notes will see an attempt now. > > Joshua Coombs -- Mailing list: https://launchpad.net/~ubuntu-phone Post to : [email protected] Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
