Hi again :D I changed console to console=ttyMDF2 and now at least i have some upstart logs (there are the only files that has changed in image). I attach a tar files with the content of /var/log/upstart.
I hope that someone could give me some hints for continue, because i'm really lost :(. Thanks. --------------------------------------------------------------------------------------------- Que todos esos ceros y unos vayan directamente a tu mierdecilla de teléfono inteligente y que cualquier inutil sea capaz de suscribirse en 12 segundos *no es «magia», es sudor y talento.* On Fri, Mar 21, 2014 at 9:29 AM, Corvus <[email protected]> wrote: > Here is the info, first the complete cmdline so you can check it's correct: > > pci=noearly earlyprintk=nologger loglevel=0 hsu_dma=7 kmemleak=off > androidboot.bootmedia=sdcard androidboot.hardware=revolution > androidboot.spid=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx > androidboot.serialno=01234567890123456789012345678901 > datapart=/dev/mmcblk0p9 console=tty0,115200n8 no_console_suspend=1 > break=bottom androidboot.lcdsize=0540x0960 ip=50.0.0.2:50 > .0.0.1::255.255.255.0::usb0:on vmalloc=172M > > And attached is the dmesg. This is a dmesg with a break=bottom, cannot get > a dmesg if i take it out. > > And this: > # ls -lan /dev/console > crw------- 1 0 0 5, 1 /dev/console > # ls -lan /dev/tty0 > crw--w---- 1 0 0 4, 0 /dev/tty0 > > Luis. > > > > --------------------------------------------------------------------------------------------- > Que todos esos ceros y unos vayan directamente a tu mierdecilla de > teléfono inteligente y que cualquier inutil sea capaz de suscribirse en 12 > segundos *no es «magia», es sudor y talento.* > > > > On Thu, Mar 20, 2014 at 7:42 PM, Oliver Grawert <[email protected]> wrote: > >> hi, >> Am Donnerstag, den 20.03.2014, 18:30 +0100 schrieb Corvus: >> > Hi everybody again. >> > >> > >> > Next problem. >> > >> > >> > I fixed some things and now i get a bootlooping device :/. I changed >> > cmdline to use break=bottom and i launch the commands manualy and all >> > works ok but: >> > >> > >> > exec run-init ${rootmnt} ${init} "$@" ${recovery: >> > +--startup-event=recovery} <${rootmnt}/dev/console >> > >${rootmnt}/dev/console 2>&1 >> >> this is typically upstart (/sbin/init) not finding a valid console >> (or /dev/console pointing to some virtual device etc) >> have a look at dmesg if there are any complaints about "console" (or if >> you can (without violating any NDA) just grab the output of dmesg via >> adb and attach it to a mail here) >> >> ciao >> oli >> > >
logs_upstart.tar
Description: Unix tar archive
-- Mailing list: https://launchpad.net/~ubuntu-phone Post to : [email protected] Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
