So I tried using rootstock and an old rootfs that was modified for a tf300 and I got :
transfering rootfs tarball ... [done] preparing system-image on device ... [done] unpacking rootfs tarball to system-image ... /sbin/sh: cd: line 1: can't cd to /cache/system/lib /sbin/sh: cd: line 1: can't cd to /cache/system/etc [done] adding android system image to installation ... Invalid sparse file format at header magi Failed to read sparse file error: protocol fault (no status) So I figured I'd look into one of the new rootfs tgz files on the cdimage server and see if I can modify it to work. Can anyone explain what I'm changing to get the armhf rootfs to work (or can I flash that and everything will be fine??)? Thanks, Taylor On Tue, May 20, 2014 at 12:12 PM, Taylor Wagner <[email protected]>wrote: > That did the trick, it compiled. > I tried make bacon to produce flashable zips and ran into an error. > I was able to fastboot the boot and recovery images and I'm working on a > rootfs file, I'll probably just try the TF300 rootfs. > Right now my tablet is hanging out in the ubuntu style recovery waiting > for me to flash rootfs so it looks like the compile went well. > Java 7 was not an issue even though the make command complained. > Thanks for your help, I may have this thing ready to go soon. > > -Taylor > > > On Mon, May 19, 2014 at 5:28 PM, Sergio Schvezov < > [email protected]> wrote: > >> On Mon, May 19, 2014 at 6:01 PM, Taylor Wagner <[email protected] >> > wrote: >> >>> Hello, >>> apologies up front if I'm barking up the wrong tree. >>> I'm trying to port to the TF201. I was following the porting guide here: >>> https://wiki.ubuntu.com/Touch/Porting >>> after adding device, kernel, and vendor stuff for tf201 from namidairo's >>> git repo >>> I tried lunch tf201 which says invalid combo >>> lunch by itself had "full_ft201-userdebug" listed so I tried that. >>> then I did make -j8 >>> and I get: >>> make: *** No rule to make target >>> `/out/target/common/obj/APPS/framework-res_intermediates/src/R.stamp', >>> needed by >>> `/out/target/common/obj/APPS/AutoParts_tfp_intermediates/src/R.stamp'. >>> Stop. >>> make: *** Waiting for unfinished jobs.... >>> >>> Any help would be greatly appreciated. >>> >> >> This is probably the device rules for your target device including those >> Android apps; you can feel confident in stripping those out from the >> makefiles. >> >> >>> Notes: I'm using java 7 because I was toying with the latest AOSP on >>> this same build machine so I don't have java 6 configured and the make >>> command complained that I had the wrong java. >>> >> >> If you used aosp sources, you shouldn't need java at all. >> >> >>> Also, namidairo's repo is based off of CM11 while the phablet stuff I >>> synced I think was on 10.1 >>> I'll try switching namidairos stuff to cm10.1 and see if that helps >>> Also, someone was working on a TF300 build that I was able to boot on my >>> TF201 so I have high hopes of porting this. >>> I couldn't get on freenode today to ask for help there, not sure if my >>> ISP is blocking or if it is down :-( >>> >>> again thanks for any help. >>> >>> Respectfully, >>> >>> Taylor >>> >>> >>> -- >>> Mailing list: https://launchpad.net/~ubuntu-phone >>> Post to : [email protected] >>> Unsubscribe : https://launchpad.net/~ubuntu-phone >>> More help : https://help.launchpad.net/ListHelp >>> >>> >> >
-- Mailing list: https://launchpad.net/~ubuntu-phone Post to : [email protected] Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
