Hi everyone! IMPORTANT! All landers please read on!
So, as discussed with QA, we have new requirements regarding what information needs to be provided whenever a silo gets marked as tested by a lander. These new rules will allow QA engineers to have a better understanding how the testing has proceeded and who to contact when in any doubts. We are making some small changes to the information provided about silo testing to make the sign off process smoother and avoid confusion. First, you need to add two small details - the name of the tester and the device used for testing. Second, it is recommended that you add comments on the testing that was done for your silo in the 'Test plans' field. Note that if you just list a test plan without further comment it will be assumed that *every* test in the test plan was run and passed - so please use the field as an opportunity to note any tests that were not run for whatever reason, or failed because of an existing bug. So, in short, when a silo has been tested by a lander, please switch the 'Testing pass?' field to: Yes (#<image number> <device> <tester>) e.g. Yes (#33 krillin sil2100) Please note that QA will not perform *any* QA sign-off for silos that do not follow the new recommendations. So we kindly ask all landers to apply these new rules ASAP. Thank you! Best regards, -- Łukasz 'sil2100' Zemczak [email protected] www.canonical.com -- Mailing list: https://launchpad.net/~ubuntu-phone Post to : [email protected] Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
