On Fri, Mar 27, 2015 at 6:52 AM, Richard Somlói <[email protected]> wrote: > Can I change the push-client's 5 minutes option to other value? Like 15 or > 30 minutes?
Yes, from IRC: <tvoss> Chipaca, do we have an easy way to configure the wakeup frequency for push-client? <Chipaca> tvoss: "poll_interval": "5m", <Chipaca> "poll_settle": "20ms", <Chipaca> "poll_net_wait": "1m", <Chipaca> "poll_polld_wait": "3m", <Chipaca> "poll_done_wait": "5s" <Chipaca> rsalveti: the answer is: copy /etc/xdg/ubuntu-push-client/ to ~/.config; edit away Didn't test it myself, but it should work. Cheers, Ricardo > 2015-03-27 4:14 GMT+01:00 Ricardo Salveti de Araujo > <[email protected]>: >> >> On Thu, Mar 26, 2015 at 5:34 AM, Heroldich Robin <[email protected]> >> wrote: >> > Hi all! >> > >> > First I would like to say thanks you to everyone who involved this >> > project, >> > it is wonderful. :) >> > My bq phone arrived yesterday, and it is fantastic, I really like it. >> > But >> > the battery life is terrible. I poweroff everything (GPS, location, >> > wifi, >> > mobiledata, bluetooth) when I was going to sleep last night. The battery >> > was >> > full (100%), and now 8 hours later it is 76%. So the battery discharged >> > 24% >> > in 8 hours without any interaction. Is it 3% per hour. Is it "normal"? >> > So If >> > I don't do anything with my phone, just leave it alone on my desk, it'll >> > only work for about 33 hours? It isn't good. My Android phone with >> > similar >> > parameters can operate for about 3 days without interactions. >> >> Alright, after a few more tests I noticed that the push-client >> interferes quite a lot with the battery consumption when you enable >> flight mode. >> >> Here are my results (all in idle): >> 1 - Radio enabled, connected via wifi, push-client enabled (default): >> consuming around 4% per hour >> 2 - Flight mode with push-client enabled (default): consuming around 3% >> per hour >> 3 - Flight mode with push-client disabled: 0.5% per hour (and noticed >> it really went into deep sleep for hours) >> >> I had a script dumping the % and voltage at every 30 seconds, but this >> is what I got: >> 26/03/2015 19:54:00 90 - 4239000 >> 26/03/2015 22:32:31 90 - 4214000 >> >> And the result at 22:32 only shows up as I resumed the phone by >> pressing power (no more data between both because the phone was in >> deep sleep). >> >> What ubuntu-push-client is doing is forcing a hardware alarm at every >> 5 minutes, and then checking if there is any new notification from the >> services you have enabled in your device (from accounts in >> system-settings). Having push-client enabled when enabling flight-mode >> is clearly an issue >> (https://bugs.launchpad.net/ubuntu/+source/ubuntu-push/+bug/1437135), >> but there are also ways to optimize it to avoid holding the suspend >> when doing the polling (https://bugs.launchpad.net/bugs/1435109). >> >> If you want to manually disable push-client, and run similar tests, >> just run '$ stop ubuntu-push-client' from your terminal. >> >> Cheers, >> -- >> Ricardo Salveti de Araujo >> >> -- >> Mailing list: https://launchpad.net/~ubuntu-phone >> Post to : [email protected] >> Unsubscribe : https://launchpad.net/~ubuntu-phone >> More help : https://help.launchpad.net/ListHelp > > -- Ricardo Salveti de Araujo -- Mailing list: https://launchpad.net/~ubuntu-phone Post to : [email protected] Unsubscribe : https://launchpad.net/~ubuntu-phone More help : https://help.launchpad.net/ListHelp
