On Tue, 2011-05-03 at 16:54 -0700, frhuot wrote: > L'écran supporte le 75 Hz (Avec Windows, c'est ce que j'ai et l'image > est nettement supérieure)
> 2e commande: > > frhuot@Ubuntu1104:~$ sudo get-edid|parse-edid > parse-edid: parse-edid version 2.0.0 > get-edid: get-edid version 2.0.0 > > Performing real mode VBE call > Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 > Function supported > Call successful > > VBE version 300 > VBE string at 0x2110 "Intel(r)Grantsdale-G Graphics Chip > Accelerated VGA BIOS" > > VBE/DDC service about to be called > Report DDC capabilities > > Performing real mode VBE call > Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 > Function supported > Call successful > > Monitor and video card combination does not support DDC1 transfers > Monitor and video card combination does not support DDC2 transfers > 0 seconds per 128 byte EDID block transfer > Screen is not blanked during DDC transfer > > Reading next EDID block > > VBE/DDC service about to be called > Read EDID > > Performing real mode VBE call > Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 > Function supported > Call failed Ah, on dirait que votre écran ne supporte pas EDID du tout. À ce moment là, l'auto-détection ne fonctionnera pas. Il est peut-être possible de fabriquer un xorg.conf pour votre écran, mais ca fait tellement longtemps que je n'ai pas fait ca que je ne peux pas vraiment vous aider davantage. Quelqu'un d'autre peut aider? Marc. -- Ubuntu-quebec mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-quebec
