Oui, c'est un écran 22 pouces (1920x1080) alors que mon portable n'a qu'un écran 15 pouces.
- Eric Le 16 juin 2011 18:36, <[email protected]> a écrit : > Est-ce que ton écran secondaire a une grande résolution? > > Il se peut que ta carte graphique ne puisse le géré correctement... > > ericparent a écrit : >> >> Bonjour, >> >> J'ai un Thinkpad T420 et je roule Ubuntu 10.10. Lorsque je branche un >> second moniteur afin d'avoir 2 écrans, mon système devient instable et >> "gèle" fréquemment. >> >> Jockey me montre que j'ai le pilote nVidia propriétaire installé mais >> je >> n'arrive pas à avoir un système stable. Si j'utilise seulement l'un ou >> l'autre des moniteurs, tout va bien, à part du "lag" lorsque je déplace >> des >> fenêtres sur mon bureau. L'affichage vidéo, sur Youtube par exemple, est >> bon. >> >> J'ai désinstallé/ré-installé les pilotes nvidia (sudo apt-get remove >> nvidia-common). L'utilisation de "System > Administration > NVIDIA X >> Server >> Settings" m'a amené à perdre mon affichage lors du démarrage suivant. >> >> J'ai dû sélectionner "Fail-safe mode" dans Grub, sélectionner un mode >> graphique "Failsafe" pour récupérer mon affichage graphique. >> >> Des conseils? Toute suggestion sera bienvenue. >> >> Voici des infos qui pourraient être utiles: >> >> >> Résultat de lspci: >> ----------------- >> 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev >> 09) >> 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port >> (rev 09) >> 00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge >> Integrated >> Graphics Controller (rev 09) >> 00:16.0 Communication controller: Intel Corporation Cougar Point HECI >> Controller #1 (rev 04) >> 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network >> Connection (rev 04) >> 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host >> Controller #2 (rev 04) >> 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio >> Controller (rev 04) >> 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 >> (rev b4) >> 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 >> (rev b4) >> 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 >> (rev b4) >> 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 >> (rev b4) >> 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host >> Controller #1 (rev 04) >> 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 04) >> 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI >> Controller (rev 04) >> 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04) >> 01:00.0 VGA compatible controller: nVidia Corporation Device 1057 (rev a1) >> 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 >> 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 05) >> 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd Device e832 (rev 04) >> ----------------- >> >> Contenu de /etc/X11/xorg.conf: >> >> ----------------- >> # nvidia-xconfig: X configuration file generated by nvidia-xconfig >> # nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep >> 13 >> 04:59:45 PDT 2010 >> >> >> Section "ServerLayout" >> Identifier "Default Layout" >> Screen "Default Screen" 0 0 >> InputDevice "Keyboard0" "CoreKeyboard" >> InputDevice "Mouse0" "CorePointer" >> EndSection >> >> Section "Module" >> Load "glx" >> EndSection >> >> Section "InputDevice" >> >> # generated from default >> Identifier "Keyboard0" >> Driver "keyboard" >> EndSection >> >> Section "InputDevice" >> >> # generated from default >> Identifier "Mouse0" >> Driver "mouse" >> Option "Protocol" "auto" >> Option "Device" "/dev/psaux" >> Option "Emulate3Buttons" "no" >> Option "ZAxisMapping" "4 5" >> EndSection >> >> Section "Monitor" >> Identifier "Configured Monitor" >> EndSection >> >> Section "Device" >> Identifier "Configured Video Device" >> Driver "nvidia" >> EndSection >> >> Section "Screen" >> Identifier "Default Screen" >> Device "Configured Video Device" >> Monitor "Configured Monitor" >> DefaultDepth 24 >> Option "NoLogo" "True" >> SubSection "Display" >> Depth 24 >> Modes "nvidia-auto-select" >> EndSubSection >> EndSection >> ----------------- >> >> Merci d'avance! >> >> - Eric >> >> >> ----- >> -- >> Eric Parent >> mailto:[email protected] >> blog: http://eric-parent.blogspot.com/ >> >> ---------- >> "I hear and I forget. >> I see and I remember. >> I do and I understand." >> - Confucius >> -- >> View this message in context: >> http://ubuntu-qc.124361.n3.nabble.com/Affichage-sur-deux-moniteurs-instable-10-10-sur-Thinkpad-T420-tp3073664p3073664.html >> Sent from the Ubuntu-Qc mailing list archive at Nabble.com. >> >> > > -- > Ubuntu-quebec mailing list > [email protected] > https://lists.ubuntu.com/mailman/listinfo/ubuntu-quebec > -- - Eric mailto:[email protected] blog: http://eric-parent.blogspot.com/ ---------- "I hear and I forget. I see and I remember. I do and I understand." - Confucius -- Ubuntu-quebec mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-quebec
