Здравствуйте, Alexander Sashnov!
Ответ на Ваше письмо от 07.06.2007 07:45
[ 0.000000] Malformed early option 'acpi'
.....
[ 22.747763] ENABLING IO-APIC IRQs
[ 0.225245] PCI: Using ACPI for IRQ routing
[ 0.233932] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 0.233952] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 0.233972] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 0.233956] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.233972] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 0.233977] PCI: Setting latency timer of device 0000:00:1c.1 to 64
Что там в начале про неправильно указаную опцию acpi ?
Вы ее отключить хотели?
В грубе, как я уже говорил, была опция acpi, по рекомендации с одного из
сайтов. Что с ней, что без нее, сеть виснет... =\
Вариант dmesg без этой опции во вложении...
--
Евсюков Денис Анатольевич
ICQ: 168 043 475, JID: juev(at)mytlt.ru
Registered Linux User #442 821
[ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu
2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00
end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003feb0000
end: 000000003ffb0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffb0000 size: 0000000000010000
end: 000000003ffc0000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 0000000000030000
end: 000000003fff0000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000010000
end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400
end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000
end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff380000 size: 0000000000c80000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262064
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262064
[ 0.000000] On node 0 totalpages: 262064
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32433 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @
0x000f8b30
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000617 MSFT 0x00000097) @
0x3ffb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x07000617 MSFT 0x00000097) @
0x3ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000617 MSFT 0x00000097) @
0x3ffb0390
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x07000617 MSFT 0x00000097) @
0x3ffb0400
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x07000617 MSFT 0x00000097) @
0x3ffc0040
[ 0.000000] ACPI: DSDT (v001 C94GD C94GD011 0x00000011 INTL 0x02002026) @
0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bed00000)
[ 0.000000] Detected 1861.563 MHz processor.
[ 21.815981] Built 1 zonelists. Total pages: 260017
[ 21.815985] Kernel command line:
root=UUID=75c7ee7e-c874-4518-b9aa-a69b60baf7aa ro vga=0x318 apic quiet splash
locale=ru_RU
[ 21.816149] mapped APIC to ffffd000 (fee00000)
[ 21.816151] mapped IOAPIC to ffffc000 (fec00000)
[ 21.816153] Enabling fast FPU save and restore... done.
[ 21.816156] Enabling unmasked SIMD FPU exception support... done.
[ 21.816162] Initializing CPU#0
[ 21.816212] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 21.816281] Console: colour dummy device 80x25
[ 21.816472] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 21.816713] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.837664] Memory: 1028192k/1048256k available (1992k kernel code, 19420k
reserved, 893k data, 328k init, 130752k highmem)
[ 21.837672] virtual kernel memory layout:
[ 21.837673] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 21.837674] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.837675] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 21.837676] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 21.837677] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 21.837678] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 21.837679] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 21.837682] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 21.916207] Calibrating delay using timer specific routine.. 3726.05
BogoMIPS (lpj=7452117)
[ 21.916238] Security Framework v1.0.0 initialized
[ 21.916242] SELinux: Disabled at boot.
[ 21.916257] Mount-cache hash table entries: 512
[ 21.916359] CPU: After generic identify, caps: bfebfbff 20000000 00000000
00000000 0000e3bd 00000000 00000001
[ 21.916366] monitor/mwait feature present.
[ 21.916367] using mwait in idle threads.
[ 21.916371] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 21.916373] CPU: L2 cache: 2048K
[ 21.916375] CPU: Physical Processor ID: 0
[ 21.916376] CPU: Processor Core ID: 0
[ 21.916378] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940
0000e3bd 00000000 00000001
[ 21.916386] Compat vDSO mapped to ffffe000.
[ 21.916389] Remapping vsyscall page to ffffe000
[ 21.916398] Checking 'hlt' instruction... OK.
[ 21.932278] SMP alternatives: switching to UP code
[ 21.932543] Early unpacking initramfs... done
[ 22.212526] ACPI: Core revision 20060707
[ 22.212755] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[ 22.214677] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 22.214693] SMP alternatives: switching to SMP code
[ 22.214761] Booting processor 1/1 eip 3000
[ 22.225130] Initializing CPU#1
[ 22.304164] Calibrating delay using timer specific routine.. 3723.30
BogoMIPS (lpj=7446611)
[ 22.304170] CPU: After generic identify, caps: bfebfbff 20000000 00000000
00000000 0000e3bd 00000000 00000001
[ 22.304174] monitor/mwait feature present.
[ 22.304177] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 22.304178] CPU: L2 cache: 2048K
[ 22.304180] CPU: Physical Processor ID: 0
[ 22.304182] CPU: Processor Core ID: 1
[ 22.304183] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940
0000e3bd 00000000 00000001
[ 22.304584] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 22.304601] Total of 2 processors activated (7449.36 BogoMIPS).
[ 22.304744] ENABLING IO-APIC IRQs
[ 22.304910] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 22.452157] checking TSC synchronization across 2 CPUs: passed.
[ 0.004001] Brought up 2 CPUs
[ 0.195791] migration_cost=72
[ 0.196038] Booting paravirtualized kernel on bare hardware
[ 0.196100] Time: 14:40:48 Date: 05/07/107
[ 0.196124] NET: Registered protocol family 16
[ 0.196193] EISA bus registered
[ 0.196197] ACPI: bus type pci registered
[ 0.196328] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.196330] PCI: Using configuration type 1
[ 0.196331] Setting up standard PCI resources
[ 0.209255] ACPI: Interpreter enabled
[ 0.209258] ACPI: Using IOAPIC for interrupt routing
[ 0.209651] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.209658] PCI: Probing PCI hardware (bus 00)
[ 0.210283] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.210287] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.210488] Boot video device is 0000:03:00.0
[ 0.210949] PCI: Transparent bridge - 0000:00:1e.0
[ 0.210997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.213305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.213559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.217530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.217779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.219560] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.219780] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.220004] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.220222] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.220442] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.220658] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.220878] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.221095] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.221183] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.221193] pnp: PnP ACPI init
[ 0.225191] pnp: PnP ACPI: found 16 devices
[ 0.225195] PnPBIOS: Disabled by ACPI PNP
[ 0.225229] PCI: Using ACPI for IRQ routing
[ 0.225231] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 0.232887] NET: Registered protocol family 8
[ 0.232889] NET: Registered protocol family 20
[ 0.233613] pnp: 00:0d: ioport range 0x290-0x29f has been reserved
[ 0.233861] PCI: Bridge: 0000:00:01.0
[ 0.233863] IO window: d000-dfff
[ 0.233867] MEM window: fc000000-feafffff
[ 0.233870] PREFETCH window: d0000000-dfffffff
[ 0.233873] PCI: Bridge: 0000:00:1c.0
[ 0.233874] IO window: disabled.
[ 0.233878] MEM window: disabled.
[ 0.233881] PREFETCH window: cff00000-cfffffff
[ 0.233885] PCI: Bridge: 0000:00:1c.1
[ 0.233888] IO window: c000-cfff
[ 0.233892] MEM window: fbf00000-fbffffff
[ 0.233895] PREFETCH window: disabled.
[ 0.233899] PCI: Bridge: 0000:00:1e.0
[ 0.233902] IO window: e000-efff
[ 0.233906] MEM window: feb00000-febfffff
[ 0.233909] PREFETCH window: disabled.
[ 0.233922] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 0.233926] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.233941] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 0.233946] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.233961] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 0.233966] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.233975] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.233997] NET: Registered protocol family 2
[ 0.271994] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.272073] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.272503] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.272742] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.272744] TCP reno registered
[ 0.288064] checking if image is initramfs... it is
[ 0.842466] Freeing initrd memory: 6706k freed
[ 0.843037] audit: initializing netlink socket (disabled)
[ 0.843052] audit(1181227249.556:1): initialized
[ 0.843137] highmem bounce pool size: 64 pages
[ 0.843211] VFS: Disk quotas dquot_6.5.1
[ 0.843228] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.843275] io scheduler noop registered
[ 0.843278] io scheduler anticipatory registered
[ 0.843280] io scheduler deadline registered
[ 0.843289] io scheduler cfq registered (default)
[ 0.843524] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.843556] assign_interrupt_mode Found MSI capability
[ 0.843558] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.843635] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.843671] assign_interrupt_mode Found MSI capability
[ 0.843673] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.843707] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.843795] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.843832] assign_interrupt_mode Found MSI capability
[ 0.843834] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.843874] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.844023] isapnp: Scanning for PnP cards...
[ 1.197720] isapnp: No Plug & Play device found
[ 1.216401] Real Time Clock Driver v1.12ac
[ 1.216448] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 1.216557] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.217120] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.217256] mice: PS/2 mouse device common for all mice
[ 1.217741] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 1.217870] input: Macintosh mouse button emulation as /class/input/input0
[ 1.217902] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.217905] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 1.218083] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.218085] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 1.220590] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.220594] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.220676] EISA: Probing bus 0 at eisa.0
[ 1.220704] EISA: Detected 0 cards.
[ 1.250778] TCP cubic registered
[ 1.250786] NET: Registered protocol family 1
[ 1.250805] Starting balanced_irq
[ 1.250811] Using IPI No-Shortcut mode
[ 1.250915] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.250922] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.250963] Magic number: 11:142:687
[ 1.251178] Freeing unused kernel memory: 328k freed
[ 1.251856] Time: tsc clocksource has been installed.
[ 1.314049] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using
6144k, total 262144k
[ 1.314053] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.314055] vesafb: protected mode interface info at c000:d230
[ 1.314058] vesafb: pmi: set display start = c00cd266, set palette = c00cd2d0
[ 1.314060] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9
3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 1.314072] vesafb: scrolling: redraw
[ 1.314074] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.347087] Console: switching to colour frame buffer device 128x48
[ 1.380019] fb0: VESA VGA frame buffer device
[ 2.429131] Capability LSM initialized
[ 2.460123] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI]
OemTableId [ CPU1PM] [20060707]
[ 2.460324] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI]
OemTableId [ CPU2PM] [20060707]
[ 2.460359] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 2.460366] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 2.770676] usbcore: registered new interface driver usbfs
[ 2.770698] usbcore: registered new interface driver hub
[ 2.770717] usbcore: registered new device driver usb
[ 2.771417] USB Universal Host Controller Interface driver v3.0
[ 2.771458] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 18
[ 2.771468] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.771471] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.771704] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 2.771729] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000b480
[ 2.771814] usb usb1: configuration #1 chosen from 1 choice
[ 2.771835] hub 1-0:1.0: USB hub found
[ 2.771840] hub 1-0:1.0: 2 ports detected
[ 2.832370] SCSI subsystem initialized
[ 2.842348] libata version 2.20 loaded.
[ 2.879688] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 2.879700] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.879704] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.879723] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 2.879753] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
[ 2.879831] usb usb2: configuration #1 chosen from 1 choice
[ 2.879853] hub 2-0:1.0: USB hub found
[ 2.879858] hub 2-0:1.0: 2 ports detected
[ 2.987613] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 20
[ 2.987622] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.987625] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.987646] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 2.987672] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000b880
[ 2.987748] usb usb3: configuration #1 chosen from 1 choice
[ 2.987768] hub 3-0:1.0: USB hub found
[ 2.987773] hub 3-0:1.0: 2 ports detected
[ 3.095577] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) ->
IRQ 16
[ 3.095584] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.095587] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.095604] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 3.095628] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 3.095701] usb usb4: configuration #1 chosen from 1 choice
[ 3.095721] hub 4-0:1.0: USB hub found
[ 3.095726] hub 4-0:1.0: 2 ports detected
[ 3.119507] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 3.203575] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 18
[ 3.203586] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.203590] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.203610] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 3.203636] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.203641] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 3.203649] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfbefbc00
[ 3.207522] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 3.207583] usb usb5: configuration #1 chosen from 1 choice
[ 3.207602] hub 5-0:1.0: USB hub found
[ 3.207607] hub 5-0:1.0: 8 ports detected
[ 3.311539] ACPI: PCI Interrupt 0000:04:01.2[C] -> GSI 20 (level, low) ->
IRQ 21
[ 3.311547] ehci_hcd 0000:04:01.2: EHCI Host Controller
[ 3.311567] ehci_hcd 0000:04:01.2: new USB bus registered, assigned bus
number 6
[ 3.311596] ehci_hcd 0000:04:01.2: irq 21, io mem 0xfebffc00
[ 3.311603] ehci_hcd 0000:04:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 3.311673] usb usb6: configuration #1 chosen from 1 choice
[ 3.311694] hub 6-0:1.0: USB hub found
[ 3.311700] hub 6-0:1.0: 4 ports detected
[ 3.419528] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 3.419538] uhci_hcd 0000:04:01.0: UHCI Host Controller
[ 3.419560] uhci_hcd 0000:04:01.0: new USB bus registered, assigned bus
number 7
[ 3.419584] uhci_hcd 0000:04:01.0: irq 22, io base 0x0000e880
[ 3.419661] usb usb7: configuration #1 chosen from 1 choice
[ 3.419683] hub 7-0:1.0: USB hub found
[ 3.419688] hub 7-0:1.0: 2 ports detected
[ 3.527544] ACPI: PCI Interrupt 0000:04:01.1[B] -> GSI 23 (level, low) ->
IRQ 18
[ 3.527555] uhci_hcd 0000:04:01.1: UHCI Host Controller
[ 3.527578] uhci_hcd 0000:04:01.1: new USB bus registered, assigned bus
number 8
[ 3.527602] uhci_hcd 0000:04:01.1: irq 18, io base 0x0000ec00
[ 3.527682] usb usb8: configuration #1 chosen from 1 choice
[ 3.527705] hub 8-0:1.0: USB hub found
[ 3.527710] hub 8-0:1.0: 2 ports detected
[ 3.636966] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.636979] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 20
[ 3.636994] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.637033] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x0001ffa0 irq 14
[ 3.637060] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma
0x0001ffa8 irq 15
[ 3.637076] scsi0 : ata_piix
[ 3.655426] usb 1-2: device not accepting address 2, error -71
[ 3.959669] ata1.00: ATAPI, max UDMA/33
[ 4.127612] ata1.00: configured for UDMA/33
[ 4.127621] scsi1 : ata_piix
[ 4.127676] ata2: port disabled. ignoring.
[ 4.128636] scsi 0:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.16
PQ: 0 ANSI: 5
[ 4.128786] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.128805] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 19
[ 4.128818] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.128843] ata3: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b082 bmdma
0x0001a880 irq 19
[ 4.128861] ata4: SATA max UDMA/133 cmd 0x0001b000 ctl 0x0001ac02 bmdma
0x0001a888 irq 19
[ 4.128868] scsi2 : ata_piix
[ 4.319322] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 4.343237] ata3.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors =
390721968
[ 4.343241] ata3.00: ATA-7: ST3200820AS, 3.AAC, max UDMA/133
[ 4.343243] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.409853] ata3.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors =
390721968
[ 4.409857] ata3.00: configured for UDMA/133
[ 4.409861] scsi3 : ata_piix
[ 4.495464] usb 7-1: configuration #1 chosen from 1 choice
[ 4.575553] ata4.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors =
312581808
[ 4.575558] ata4.00: ATA-7: SAMSUNG HD160JJ, WU100-41, max UDMA7
[ 4.575560] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.599541] ata4.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors =
312581808
[ 4.599544] ata4.00: configured for UDMA/133
[ 4.599638] scsi 2:0:0:0: Direct-Access ATA ST3200820AS 3.AA
PQ: 0 ANSI: 5
[ 4.599922] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10
PQ: 0 ANSI: 5
[ 4.600558] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 4.600581] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 4.600605] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 4.600776] eth0: RTL8168b/8111b at 0xf884a000, 00:13:8f:b8:ab:d9, IRQ 17
[ 4.619370] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 4.619374] Uniform CD-ROM driver Revision: 3.20
[ 4.619750] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.620181] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 4.620191] sda: Write Protect is off
[ 4.620193] sda: Mode Sense: 00 3a 00 00
[ 4.620205] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.620239] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 4.620247] sda: Write Protect is off
[ 4.620249] sda: Mode Sense: 00 3a 00 00
[ 4.620261] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.620265] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.624105] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.624197] scsi 3:0:0:0: Attached scsi generic sg2 type 0
[ 4.641050] sda1
[ 4.641282] sd 2:0:0:0: Attached scsi disk sda
[ 4.641406] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
[ 4.641415] sdb: Write Protect is off
[ 4.641417] sdb: Mode Sense: 00 3a 00 00
[ 4.641430] SCSI device sdb: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.641463] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
[ 4.641471] sdb: Write Protect is off
[ 4.641472] sdb: Mode Sense: 00 3a 00 00
[ 4.641485] SCSI device sdb: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.641487] sdb: sdb1 sdb2 sdb3 sdb4
[ 4.661304] sd 3:0:0:0: Attached scsi disk sdb
[ 4.859562] Attempting manual resume
[ 4.859565] swsusp: Resume From Partition 8:18
[ 4.859567] PM: Checking swsusp image.
[ 4.859714] PM: Resume from disk failed.
[ 4.865865] ReiserFS: sdb3: found reiserfs format "3.6" with standard journal
[ 4.865871] ReiserFS: sdb3: using ordered data mode
[ 4.870422] ReiserFS: sdb3: journal params: device sdb3, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 4.870611] ReiserFS: sdb3: checking transaction log (sdb3)
[ 4.910497] ReiserFS: sdb3: Using r5 hash to sort names
[ 5.123189] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 5.305493] usb 1-2: configuration #1 chosen from 1 choice
[ 16.235174] Netfilter messages via NETLINK v0.30.
[ 16.240946] nf_conntrack version 0.5.0 (8189 buckets, 65512 max)
[ 16.327291] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.410118] PPP generic driver version 2.4.2
[ 19.125542] r8169: eth0: link down
[ 19.125549] r8169: eth0: link down
[ 19.352427] NET: Registered protocol family 10
[ 19.352511] lo: Disabled Privacy Extensions
[ 19.352552] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.626874] r8169: eth0: link up
[ 20.628813] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.629800] Linux agpgart interface v0.102 (c) Dave Jones
[ 21.631265] agpgart: Detected an Intel 945G Chipset.
[ 21.645652] agpgart: AGP aperture is 256M @ 0x0
[ 21.659146] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.660568] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.978277] intel_rng: FWH not detected
[ 22.212891] input: PC Speaker as /class/input/input2
[ 22.231613] nvidia: module license 'NVIDIA' taints kernel.
[ 22.497963] parport: PnPBIOS parport detected.
[ 22.498015] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 22.507359] iTCO_vendor_support: vendor-support=0
[ 22.508292] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 22.508374] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0860)
[ 22.508409] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.645589] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 22.645599] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 22.645671] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb
26 23:21:15 PST 2007
[ 22.884245] input: Logitech USB Receiver as /class/input/input3
[ 22.884302] lmpcm_usb.c: Detected device: Logitech USB Receiver
[ 22.884314] usbcore: registered new interface driver lmpcm_usb
[ 22.884318] ubuntu/misc/lmpcm_usb.c: v0.5.5:USB Logitech MediaPlay Cordless
Mouse driver
[ 22.886230] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 22.886245] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 22.965663] usbcore: registered new interface driver hiddev
[ 22.965691] usbcore: registered new interface driver usbhid
[ 22.965693] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 23.096378] hda_codec: Unknown model for ALC883, trying auto-probe from
BIOS...
[ 23.392124] lp0: using parport0 (interrupt-driven).
[ 23.406022] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) ->
IRQ 19
[ 23.530389] Linux video capture interface: v2.00
[ 23.576451] usbcore: registered new interface driver quickcam
[ 23.675631] fuse init (API version 7.8)
[ 23.709427] Adding 1052248k swap on
/dev/disk/by-uuid/e552092e-1496-446a-8ec3-5b9f3b4cab54. Priority:-1 extents:1
across:1052248k
[ 23.904236] EXT2-fs warning: mounting unchecked fs, running e2fsck is
recommended
[ 23.905601] ReiserFS: sdb4: found reiserfs format "3.6" with standard journal
[ 23.905621] ReiserFS: sdb4: using ordered data mode
[ 23.914442] ReiserFS: sdb4: journal params: device sdb4, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 23.914647] ReiserFS: sdb4: checking transaction log (sdb4)
[ 23.985043] ReiserFS: sdb4: Using r5 hash to sort names
[ 24.066039] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 24.120846] NTFS volume version 3.1.
[ 25.286209] Using specific hotkey driver
[ 25.374098] No dock devices found.
[ 25.444073] input: Power Button (FF) as /class/input/input4
[ 25.444319] ACPI: Power Button (FF) [PWRF]
[ 25.445037] input: Power Button (CM) as /class/input/input5
[ 25.445223] ACPI: Power Button (CM) [PWRB]
[ 25.508481] ibm_acpi: ec object not found
[ 25.592659] pcc_acpi: loading...
[ 29.619830] ppdev: user-space parallel port driver
[ 31.035092] eth0: no IPv6 routers present
[ 31.513600] Bluetooth: Core ver 2.11
[ 31.513657] NET: Registered protocol family 31
[ 31.513659] Bluetooth: HCI device and connection manager initialized
[ 31.513662] Bluetooth: HCI socket layer initialized
[ 31.534493] Bluetooth: L2CAP ver 2.8
[ 31.534498] Bluetooth: L2CAP socket layer initialized
[ 31.744598] Bluetooth: RFCOMM socket layer initialized
[ 31.744610] Bluetooth: RFCOMM TTY layer initialized
[ 31.744611] Bluetooth: RFCOMM ver 1.8
--
ubuntu-ru mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
