Да, точно. Только у меня по другому выглядит немного: [ 392.842291] usb 1-1.4: new full speed USB device using ehci_hcd and address 7 [ 392.962895] usb 1-1.4: configuration #1 chosen from 1 choice [ 393.215198] usb 1-1.4: USB disconnect, address 7 [ 394.631159] usb 1-1.4: new full speed USB device using ehci_hcd and address 8 [ 394.742338] usb 1-1.4: configuration #1 chosen from 1 choice [ 394.910438] usb 1-1.4: USB disconnect, address 8 [ 394.910477] btusb_intr_complete: hci0 urb ffff88011b18d540 failed to resubmit (19) [ 394.913766] btusb_bulk_complete: hci0 urb ffff88011b18d6c0 failed to resubmit (19) [ 394.917326] btusb_bulk_complete: hci0 urb ffff88011b18d0c0 failed to resubmit (19) [ 438.894962] usb 1-1.2: new full speed USB device using ehci_hcd and address 9 [ 438.974917] usb 1-1.2: device descriptor read/64, error -32 [ 439.987526] usb 1-1.2: configuration #1 chosen from 1 choice [ 440.370532] Bluetooth: RFCOMM TTY layer initialized [ 440.370549] Bluetooth: RFCOMM socket layer initialized [ 440.370558] Bluetooth: RFCOMM ver 1.11
25 августа 2010 г. 15:55 пользователь Serg Musichenko <[email protected]> написал: > После нажатия Fn-F3 (включение выключенние Wi-Fi/bluetooth) под Fedora 13 > > Проииходит следующие > > > usb 1-1.4: new full speed USB device using ehci_hcd and address 5 > usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3000 > usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > Bluetooth: Atheros AR30xx firmware driver ver 1.0 > usb 1-1.4: firmware: requesting ath3k-1.fw > usbcore: registered new interface driver ath3k > usb 1-1.4: USB disconnect, address 5 > usb 1-1.4: new full speed USB device using ehci_hcd and address 6 > usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3002 > usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > Bluetooth: Core ver 2.15 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: Generic Bluetooth USB driver ver 0.6 > usbcore: registered new interface driver btusb > Bluetooth: L2CAP ver 2.14 > Bluetooth: L2CAP socket layer initialized > Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > Bluetooth: BNEP filters: protocol multicast > Bluetooth: SCO (Voice Link) ver 0.6 > Bluetooth: SCO socket layer initialized > usb 1-1.4: USB disconnect, address 6 > btusb_intr_complete: hci0 urb ffff88004ccbe240 failed to resubmit (19) > btusb_bulk_complete: hci0 urb ffff88004ccbe9c0 failed to resubmit (19) > btusb_bulk_complete: hci0 urb ffff88004ccbec00 failed to resubmit (19) > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM ver 1.11 > > Как видно usb device 0сf3:3002 (именно оно отвечает за bt) появляется и > исчезает. > > Под win7 блютус все время после перезагрузки выключен при нажатии на > Fn-F3 появляется включалка где можно включить его. > > > Может нужно заблеклистить ath3k и все там в нем нет все равно поддержки > 0cf3:3002 ? > > > > > -- > ubuntu-ru mailing list > [email protected] > https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru > -- ubuntu-ru mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru
