Thanks again. kevin@awabi:~/tmp$ sudo /usr/lib/x86_64-linux-gnu/lxc/lxc-net stop kevin@awabi:~/tmp$ sudo /usr/lib/x86_64-linux-gnu/lxc/lxc-net start
dnsmasq: failed to create listening socket for 10.0.3.1: Cannot assign requested address Failed to setup lxc-net. kevin@awabi:~/tmp$ sudo brctl show bridge name bridge id STP enabled interfaces virbr0 8000.52540063031d yes virbr0-nic No luck with starting it. Here is /etc/default/lxc-net # This file is auto-generated by lxc.postinst if it does not # exist. Customizations will not be overridden. # Leave USE_LXC_BRIDGE as "true" if you want to use lxcbr0 for your # containers. Set to "false" if you'll use virbr0 or another existing # bridge, or mavlan to your host's NIC. USE_LXC_BRIDGE="true" # USE_LXC_BRIDGE="false" # If you change the LXC_BRIDGE to something other than lxcbr0, then # you will also need to update your /etc/lxc/default.conf as well as the # configuration (/var/lib/lxc/<container>/config) for any containers # already created using the default config to reflect the new bridge # name. # If you have the dnsmasq daemon installed, you'll also have to update # /etc/dnsmasq.d/lxc and restart the system wide dnsmasq daemon. LXC_BRIDGE="lxcbr0" LXC_ADDR="10.0.3.1" LXC_NETMASK="255.255.255.0" LXC_NETWORK="10.0.3.0/24" LXC_DHCP_RANGE="10.0.3.2,10.0.3.254" LXC_DHCP_MAX="253" # Uncomment the next line if you'd like to use a conf-file for the lxcbr0 # dnsmasq. For instance, you can use 'dhcp-host=mail1,10.0.3.100' to have # container 'mail1' always get ip address 10.0.3.100. #LXC_DHCP_CONFILE=/etc/lxc/dnsmasq.conf # Uncomment the next line if you want lxcbr0's dnsmasq to resolve the .lxc # domain. You can then add "server=/lxc/10.0.3.1' (or your actual ) # to /etc/dnsmasq.conf, after which 'container1.lxc' will resolve on your # host. #LXC_DOMAIN="lxc" -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1452601 Title: vivid container's networking.service fails on boot with signal=PIPE To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1452601/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
