On Mon, Mar 7, 2011 at 6:51 AM, Ruben Laban <[email protected]> wrote:
> This is the new "10.04 and newer" way.
>
> In order to have the last 3 lines applied, you need to replace the
> ifenslave
> lines with:
>
> bond-slaves eth0 eth1
>
>
Looks like I have a 10.04 server setup the old way but it is working.
Here's my config.
iface eth0 inet manual
iface eth1 inet manual
auto bond0
iface bond0 inet static
address 10.0.0.10
netmask 255.255.255.0
broadcast 10.0.0.255
gateway 10.0.0.1
bond-mode balance-rr
bond-miimon 100
up /sbin/ifenslave bond0 eth0 eth1
down /sbin/ifenslave -d bond0 eth0 eth1
Looking at https://help.ubuntu.com/community/UbuntuBonding it appears as
though if you're using the "bond-slaves" method you also no longer need to
have the "iface ethX inet manual" lines. Is this correct?
I'll have to look into migrating over to the new way in my next maintenance
window.
--
David
--
ubuntu-server mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
More info: https://wiki.ubuntu.com/ServerTeam
