On Sun, 2012-04-29 at 10:39 -0400, Mike Holstein wrote: > if it were my box, i would remove/disable all but the RME for > testing/troubleshooting.. i would want to here any known good audio > file play... could be as simple as an alsa or kernel version not > supplying support anymore, or a config issue... i feel the subject > line, and your earlier assumption is not correct though "due to > pulse"... i usually run aplay -l in the terminal to see if alsa is > seeing the devices that pulse would be using...
spinymouse@precise:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Default [RME AIO_579bcc], device 0: RME AIO [RME AIO] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: EWX2496 [TerraTec EWX24/96], device 0: ICE1712 multi [ICE1712 multi] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: EWX2496_1 [TerraTec EWX24/96], device 0: ICE1712 multi [ICE1712 multi] Subdevices: 1/1 Subdevice #0: subdevice #0 And a test tone send from my mixing console is shown by the hdspmixer! If this happens (no out but in is ok), removing PA usually will solve the issue. I'll reboot in some minutes and do a backup. After that I'll find a way to disable or remove PA. Maybe a dummy package will do the job. - Ralf -- Ubuntu-Studio-devel mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-devel
