Hello,
does any body have the same bug with UbuntuStudio?
Sometimes, when I start UbuntuStudio, I receive this error message:
"Did not receive a reply. Possible causes include: the remote
application did not send a reply, the message bus security policy
blocked the reply, the reply timeout expired, or the network
connection was broken.
GNOME will try to load settings manager in the next time it starts."
when its happens, a lot of stuffs don work well, including theme
configs, hd drives arent mounted, etc.
I've found a link about it:
https://bugs.launchpad.net/ubuntu/+source/control-center/+bug/84876
thank you.
j.jR.
00:00.0 0600: 8086:1130 (rev 11)
Subsystem: 104d:80df
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:02.0 0300: 8086:1132 (rev 11) (prog-if 00 [VGA])
Subsystem: 104d:80df
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1e.0 0604: 8086:2448 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=09, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4100000-f41fffff
Prefetchable memory behind bridge: 20000000-27ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 0601: 8086:244c (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 0101: 8086:244a (rev 03) (prog-if 80 [Master])
Subsystem: 104d:80df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 1800 [size=16]
00:1f.2 0c03: 8086:2442 (rev 03) (prog-if 00 [UHCI])
Subsystem: 104d:80df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1820 [size=32]
00:1f.3 0c05: 8086:2443 (rev 03)
Subsystem: 104d:80df
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 1810 [size=16]
00:1f.4 0c03: 8086:2444 (rev 03) (prog-if 00 [UHCI])
Subsystem: 104d:80df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at 2400 [size=32]
00:1f.5 0401: 8086:2445 (rev 03)
Subsystem: 104d:80df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1840 [size=64]
00:1f.6 0703: 8086:2446 (rev 03) (prog-if 00 [Generic])
Subsystem: 104d:80df
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 1880 [size=128]
01:00.0 0c00: 104c:8021 (rev 02) (prog-if 10 [OHCI])
Subsystem: 104d:80df
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4101000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f4104000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
01:02.0 0607: 1180:0476 (rev 80)
Subsystem: 104d:80df
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4102000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:02.1 0607: 1180:0476 (rev 80)
Subsystem: 104d:80df
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 9
Region 0: Memory at f4103000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 24000000-27fff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00003c00-00003cff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:08.0 0200: 8086:2449 (rev 03)
Subsystem: 8086:3013
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Capabilities: <access denied>
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory
Controller Hub (rev 11)
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation 82815 Chipset Graphics
Controller (CGC) (rev 11) (prog-if 00 [VGA])
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 03) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=09, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4100000-f41fffff
Prefetchable memory behind bridge: 20000000-27ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801BAM ISA Bridge (LPC) (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801BAM IDE U100 Controller (rev 03)
(prog-if 80 [Master])
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 1800 [size=16]
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev
03) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1820 [size=32]
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 03)
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 1810 [size=16]
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev
03) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at 2400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio
Controller (rev 03)
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1840 [size=64]
00:1f.6 Modem: Intel Corporation 82801BA/BAM AC'97 Modem Controller (rev 03)
(prog-if 00 [Generic])
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 1880 [size=128]
01:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller
(PHY/Link Integrated) (rev 02) (prog-if 10 [OHCI])
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4101000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f4104000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
01:02.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4102000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:02.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
Subsystem: Sony Corporation Vaio PCG-FX403
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 9
Region 0: Memory at f4103000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 24000000-27fff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00003c00-00003cff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet
Controller (rev 03)
Subsystem: Intel Corporation EtherExpress PRO/100 VE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
[ 0.000000] Linux version 2.6.22-14-rt ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT RT Mon Oct
15 01:05:51 GMT 2007 (Unofficial)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fcf0000 (usable)
[ 0.000000] BIOS-e820: 000000000fcf0000 - 000000000fcff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000fcff000 - 000000000fd00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fd00000 - 000000000fe80000 (usable)
[ 0.000000] BIOS-e820: 000000000fe80000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 254MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65152) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65152
[ 0.000000] HighMem 65152 -> 65152
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65152
[ 0.000000] On node 0 totalpages: 65152
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4040 pages, LIFO batch:0
[ 0.000000] Normal zone: 834 pages used for memmap
[ 0.000000] Normal zone: 60222 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6C70 checksum 0
[ 0.000000] ACPI: RSDP 000F6C70, 0014 (r0 SONY )
[ 0.000000] ACPI: RSDT 0FCFA665, 002C (r1 SONY U0 20020319 PTL
0)
[ 0.000000] ACPI: FACP 0FCFEF64, 0074 (r1 SONY U0 20020319 PTL
1000000)
[ 0.000000] ACPI: DSDT 0FCFA691, 48D3 (r1 SONY U0 20020319 PTL
100000B)
[ 0.000000] ACPI: FACS 0FCFFFC0, 0040
[ 0.000000] ACPI: BOOT 0FCFEFD8, 0028 (r1 SONY U0 20020319 PTL
1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
10000000:ef800000)
[ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
[ 0.000000] Built 1 zonelists. Total pages: 64262
[ 0.000000] Kernel command line:
root=UUID=a4ed97c0-dc07-4619-a87d-7ab20514e30c ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0138d000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] WARNING: experimental RCU implementation.
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 993.707 MHz processor.
[ 14.495439] Console: colour VGA+ 80x25
[ 14.496101] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.496722] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 14.522910] Memory: 245004k/260608k available (2056k kernel code, 14956k
reserved, 970k data, 364k init, 0k highmem)
[ 14.522933] virtual kernel memory layout:
[ 14.522936] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 14.522939] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.522942] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 14.522945] lowmem : 0xc0000000 - 0xcfe80000 ( 254 MB)
[ 14.522948] .init : 0xc03fb000 - 0xc0456000 ( 364 kB)
[ 14.522951] .data : 0xc03022ec - 0xc03f4b44 ( 970 kB)
[ 14.522954] .text : 0xc0100000 - 0xc03022ec (2056 kB)
[ 14.522961] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 14.583216] Calibrating delay using timer specific routine.. 1988.19
BogoMIPS (lpj=994099)
[ 14.583313] Security Framework v1.0.0 initialized
[ 14.583330] SELinux: Disabled at boot.
[ 14.583372] Mount-cache hash table entries: 512
[ 14.583691] CPU: After generic identify, caps: 0383f9ff 00000000 00000000
00000000 00000000 00000000 00000000
[ 14.583716] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 14.583723] CPU: L2 cache: 256K
[ 14.583730] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
00000000 00000000 00000000
[ 14.583752] Compat vDSO mapped to ffffe000.
[ 14.583784] Checking 'hlt' instruction... OK.
[ 14.587427] SMP alternatives: switching to UP code
[ 14.587707] Freeing SMP alternatives: 9k freed
[ 14.588273] Early unpacking initramfs... done
[ 15.303205] ACPI: Core revision 20070126
[ 15.303477] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 15.312237] CPU0: Intel Pentium III (Coppermine) stepping 0a
[ 15.312255] SMP motherboard not detected.
[ 15.312260] Local APIC not detected. Using dummy APIC emulation.
[ 15.313195] Brought up 1 CPUs
[ 15.313531] Booting paravirtualized kernel on bare hardware
[ 15.313689] Time: 12:04:22 Date: 10/04/107
[ 15.313811] NET: Registered protocol family 16
[ 15.314114] EISA bus registered
[ 15.314140] ACPI: bus type pci registered
[ 15.315463] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1
[ 15.315469] PCI: Using configuration type 1
[ 15.315474] Setting up standard PCI resources
[ 15.328744] ACPI: EC: Look up EC in DSDT
[ 15.329365] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 15.333113] ACPI: Interpreter enabled
[ 15.333127] ACPI: (supports S0 S3 S4 S5)
[ 15.333159] ACPI: Using PIC for interrupt routing
[ 15.379966] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 15.380127] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.380155] PCI: Probing PCI hardware (bus 00)
[ 15.380509] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 15.380519] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 15.381193] PCI: Firmware left 0000:01:08.0 e100 interrupts enabled,
disabling
[ 15.381277] PCI: Transparent bridge - 0000:00:1e.0
[ 15.381542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.381662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 15.385845] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 15.386098] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[ 15.386347] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0
[ 15.386588] ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *0
[ 15.386871] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[ 15.387113] ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
[ 15.387384] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.387427] pnp: PnP ACPI init
[ 15.387456] ACPI: bus type pnp registered
[ 15.441219] pnp: PnP ACPI: found 13 devices
[ 15.441228] ACPI: ACPI bus type pnp unregistered
[ 15.441237] PnPBIOS: Disabled by ACPI PNP
[ 15.441442] PCI: Using ACPI for IRQ routing
[ 15.441451] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 15.445181] NET: Registered protocol family 8
[ 15.445187] NET: Registered protocol family 20
[ 15.445481] pnp: 00:01: iomem range 0xff00000-0xfffffff could not be reserved
[ 15.445499] pnp: 00:02: iomem range 0xff800000-0xffffffff could not be
reserved
[ 15.476562] PCI: Bus 2, cardbus bridge: 0000:01:02.0
[ 15.476571] IO window: 00003400-000034ff
[ 15.476578] IO window: 00003800-000038ff
[ 15.476586] PREFETCH window: 20000000-23ffffff
[ 15.476593] MEM window: 28000000-2bffffff
[ 15.476600] PCI: Bus 6, cardbus bridge: 0000:01:02.1
[ 15.476605] IO window: 00003c00-00003cff
[ 15.476626] IO window: 00001400-000014ff
[ 15.476634] PREFETCH window: 24000000-27ffffff
[ 15.476641] MEM window: 2c000000-2fffffff
[ 15.476647] PCI: Bridge: 0000:00:1e.0
[ 15.476653] IO window: 3000-3fff
[ 15.476662] MEM window: f4100000-f41fffff
[ 15.476670] PREFETCH window: 20000000-27ffffff
[ 15.476695] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.477309] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 15.477317] PCI: setting IRQ 9 as level-triggered
[ 15.477323] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9
(level, low) -> IRQ 9
[ 15.477337] PCI: Setting latency timer of device 0000:01:02.0 to 64
[ 15.477742] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 15.477748] ACPI: PCI Interrupt 0000:01:02.1[B] -> Link [LNKD] -> GSI 9
(level, low) -> IRQ 9
[ 15.477760] PCI: Setting latency timer of device 0000:01:02.1 to 64
[ 15.477841] NET: Registered protocol family 2
[ 15.483757] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 15.483905] TCP established hash table entries: 8192 (order: 6, 360448 bytes)
[ 15.485259] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 15.486734] TCP: Hash tables configured (established 8192 bind 8192)
[ 15.486748] TCP reno registered
[ 15.488967] checking if image is initramfs... it is
[ 16.840044] Freeing initrd memory: 7160k freed
[ 16.840513] Simple Boot Flag at 0x36 set to 0x1
[ 16.841240] audit: initializing netlink socket (disabled)
[ 16.841344] audit(1194177862.867:1): initialized
[ 16.841787] VFS: Disk quotas dquot_6.5.1
[ 16.841814] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.841947] io scheduler noop registered
[ 16.841953] io scheduler anticipatory registered
[ 16.841957] io scheduler deadline registered
[ 16.841983] io scheduler cfq registered (default)
[ 16.842017] Boot video device is 0000:00:02.0
[ 16.842748] isapnp: Scanning for PnP cards...
[ 17.199539] isapnp: No Plug & Play device found
[ 17.287923] Real Time Clock Driver v1.12ac
[ 17.288266] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 17.288428] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.290435] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.291708] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 17.291723] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9
(level, low) -> IRQ 9
[ 17.291741] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 17.293705] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 17.294251] input: Macintosh mouse button emulation as /class/input/input0
[ 17.294515] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq
1,12
[ 17.297162] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.297335] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.297703] mice: PS/2 mouse device common for all mice
[ 17.298026] EISA: Probing bus 0 at eisa.0
[ 17.298044] Cannot allocate resource for EISA slot 1
[ 17.298050] Cannot allocate resource for EISA slot 2
[ 17.298055] Cannot allocate resource for EISA slot 3
[ 17.298083] EISA: Detected 0 cards.
[ 17.298329] TCP cubic registered
[ 17.298353] NET: Registered protocol family 1
[ 17.298392] Using IPI No-Shortcut mode
[ 17.298818] Magic number: 15:115:76
[ 17.300373] Freeing unused kernel memory: 364k freed
[ 17.323887] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.870182] AppArmor: AppArmor initialized<5>audit(1194177864.867:2):
type=1505 info="AppArmor initialized" pid=1147
[ 18.893925] fuse init (API version 7.8)
[ 18.908384] Failure registering capabilities with primary security module.
[ 18.932401] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 18.932416] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 18.939524] ACPI: Thermal Zone [ATF0] (50 C)
[ 21.388921] Floppy drive(s): fd0 is 1.44M
[ 21.395291] usbcore: registered new interface driver usbfs
[ 21.397527] usbcore: registered new interface driver hub
[ 21.405703] FDC 0 is a post-1991 82077
[ 21.405796] usbcore: registered new device driver usb
[ 21.430385] SCSI subsystem initialized
[ 21.466837] USB Universal Host Controller Interface driver v3.0
[ 21.468957] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9
(level, low) -> IRQ 9
[ 21.468988] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 21.468996] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 21.469763] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus
number 1
[ 21.470941] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001820
[ 21.472141] usb usb1: configuration #1 chosen from 1 choice
[ 21.472534] hub 1-0:1.0: USB hub found
[ 21.472556] hub 1-0:1.0: 2 ports detected
[ 21.475047] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 21.475057] e100: Copyright(c) 1999-2006 Intel Corporation
[ 21.515496] libata version 2.21 loaded.
[ 21.573959] PCI: Enabling device 0000:01:00.0 (0110 -> 0112)
[ 21.574495] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 21.574503] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9
(level, low) -> IRQ 9
[ 21.625869] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]
MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 21.626691] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[ 21.626701] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9
(level, low) -> IRQ 9
[ 21.628178] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[ 21.628185] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9
(level, low) -> IRQ 9
[ 21.628207] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 21.628215] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 21.629088] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus
number 2
[ 21.629145] uhci_hcd 0000:00:1f.4: irq 9, io base 0x00002400
[ 21.630432] usb usb2: configuration #1 chosen from 1 choice
[ 21.630964] hub 2-0:1.0: USB hub found
[ 21.630991] hub 2-0:1.0: 2 ports detected
[ 21.654259] e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr
08:00:46:28:4E:67
[ 21.733004] ata_piix 0000:00:1f.1: version 2.11
[ 21.733162] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 21.733514] scsi0 : ata_piix
[ 21.734355] scsi1 : ata_piix
[ 21.734659] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x00011800 irq 14
[ 21.734668] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x00011808 irq 15
[ 22.195074] ata1.00: ATA-5: IBM-DJSA-230, JS6OAC3A, max UDMA/66
[ 22.195087] ata1.00: 58605120 sectors, multi 16: LBA
[ 22.201040] ata1.00: configured for UDMA/66
[ 22.505836] ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.50, max UDMA/33
[ 22.662802] ata2.00: configured for UDMA/33
[ 22.663174] scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-230 JS6O
PQ: 0 ANSI: 5
[ 22.666253] scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.50
PQ: 0 ANSI: 5
[ 22.792820] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[ 22.792856] sd 0:0:0:0: [sda] Write Protect is off
[ 22.792862] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.792905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.793466] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[ 22.793494] sd 0:0:0:0: [sda] Write Protect is off
[ 22.793500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.793541] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 22.793554] sda:<7>ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0800460300ab3c6a]
[ 23.204140] sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 23.258469] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.263269] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 23.263278] Uniform CD-ROM driver Revision: 3.20
[ 23.263907] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 23.286681] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.287061] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 24.246896] Attempting manual resume
[ 24.246907] swsusp: Resume From Partition 8:5
[ 24.246912] PM: Checking swsusp image.
[ 24.274377] PM: Resume from disk failed.
[ 24.350492] kjournald starting. Commit interval 5 seconds
[ 24.350526] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.828724] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 40.170223] NET: Registered protocol family 17
[ 42.147506] input: PC Speaker as /class/input/input2
[ 42.502455] input: PS/2 Mouse as /class/input/input3
[ 42.516972] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[ 43.001321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 43.075065] Linux agpgart interface v0.102 (c) Dave Jones
[ 43.118075] Intel 82802 RNG detected
[ 43.183829] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 43.234732] agpgart: Detected an Intel i815 Chipset.
[ 43.402032] agpgart: AGP aperture is 64M @ 0xf8000000
[ 43.402097] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[ 43.626836] iTCO_vendor_support: vendor-support=0
[ 43.891268] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 43.903894] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by
hardware
[ 43.903921] iTCO_wdt: No card detected
[ 44.664604] parport_pc 00:0b: reported by Plug and Play ACPI
[ 44.664673] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 45.006520] Yenta: CardBus bridge found at 0000:01:02.0 [104d:80df]
[ 45.128927] Yenta: ISA IRQ mask 0x0c38, PCI irq 9
[ 45.128938] Socket status: 30000006
[ 45.128944] Yenta: Raising subordinate bus# of parent bus (#01) from #01 to
#05
[ 45.128961] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 45.128972] cs: IO port probe 0x3000-0x3fff: clean.
[ 45.129438] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff
[ 45.129446] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 45.130582] Yenta: CardBus bridge found at 0000:01:02.1 [104d:80df]
[ 45.252880] Yenta: ISA IRQ mask 0x0c38, PCI irq 9
[ 45.252889] Socket status: 30000006
[ 45.252895] Yenta: Raising subordinate bus# of parent bus (#01) from #05 to
#09
[ 45.252908] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 45.252916] cs: IO port probe 0x3000-0x3fff: clean.
[ 45.253379] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff
[ 45.253387] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 45.767421] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9
(level, low) -> IRQ 9
[ 45.767466] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 46.030650] cs: IO port probe 0x100-0x3af: clean.
[ 46.033375] cs: IO port probe 0x100-0x3af: clean.
[ 46.035903] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 46.037315] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 46.038286] cs: IO port probe 0x820-0x8ff: clean.
[ 46.039193] cs: IO port probe 0x820-0x8ff: clean.
[ 46.039839] cs: IO port probe 0xc00-0xcf7: clean.
[ 46.040820] cs: IO port probe 0xc00-0xcf7: clean.
[ 46.042369] cs: IO port probe 0xa00-0xaff: clean.
[ 46.045327] cs: IO port probe 0xa00-0xaff: clean.
[ 46.179980] intel8x0_measure_ac97_clock: measured 50614 usecs
[ 46.179995] intel8x0: clocking to 48000
[ 47.090938] loop: module loaded
[ 47.164384] lp0: using parport0 (interrupt-driven).
[ 47.387044] Adding 746980k swap on /dev/sda5. Priority:-1 extents:1
across:746980k
[ 50.983044] EXT3 FS on sda4, internal journal
[ 51.668936] NET: Registered protocol family 10
[ 51.669110] lo: Disabled Privacy Extensions
[ 62.053912] eth0: no IPv6 routers present
[ 62.725840] kjournald starting. Commit interval 5 seconds
[ 62.726617] EXT3 FS on sda2, internal journal
[ 62.726629] EXT3-fs: mounted filesystem with ordered data mode.
[ 65.168002] input: Lid Switch as /class/input/input5
[ 65.168693] ACPI: Lid Switch [LID]
[ 65.169763] input: Power Button (CM) as /class/input/input6
[ 65.170508] ACPI: Power Button (CM) [PWRB]
[ 65.370047] No dock devices found.
[ 65.482417] ACPI: Battery Slot [BAT1] (battery present)
[ 65.483299] ACPI: Battery Slot [BAT2] (battery absent)
[ 65.702834] ACPI: AC Adapter [ACAD] (on-line)
[ 65.827258] ACPI: Video Device [GCH0] (multi-head: yes rom: yes post: no)
[ 66.365122] speedstep: frequency transition measured seems out of range
(6000 nSec), falling back to a safe one of 500000 nSec.
[ 67.993915] ppdev: user-space parallel port driver
[ 68.235713] audit(1194188713.906:3): type=1503 operation="inode_permission"
requested_mask="a" denied_mask="a" name="/dev/tty" pid=4850
profile="/usr/sbin/cupsd"
[ 68.340091] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 68.340104] apm: overridden by ACPI.
[ 68.647986] sonypi: Sony Programmable I/O Controller Driver v1.26.
[ 68.652608] sonypi: please try the sony-laptop module instead and report
failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
[ 68.658692] sonypi: detected type2 model, verbose = 0, fnkeyinit = off,
camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[ 68.658712] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[ 68.658717] sonypi: device allocated minor is 63
[ 68.662884] input: Sony Vaio Jogdial as /class/input/input7
[ 68.666056] input: Sony Vaio Keys as /class/input/input8
[ 68.928335] sony-laptop: Sony Notebook Control Driver v0.5.
[ 68.935989] input: Sony Vaio Keys as /class/input/input9
[ 68.945796] input: Sony Vaio Jogdial as /class/input/input10
[ 69.728644] Failure registering capabilities with primary security module.
[ 101.363808] Marking TSC unstable due to: cpufreq changes.
[ 101.908028] Clocksource tsc unstable (delta = -150027610 ns)
--
Ubuntu-Studio-users mailing list
[email protected]
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
