What are your jackd, resp. QjackCtl settings? Periods/Buffers should be 2, if possible, but sometimes 3 is needed, other sizes make no sense. Frames/Period depends on your hardware combination ;), the lower you can go, the better ;). 48 KHz is the preferred Sample Rate for studio usage, lower sample rates aren't good and higher sample rates usually are only good to get lower latency for stage usage. Just a few devices aren't optimised to 48 KHz, if so using another sample rate could be useful for studio usage too.
When using Qtractor for audio recording, changing the Frames/Period between recording and mixing does cause an serious issue. The latency correction will not be corrected and Qtractor already hasn't a good latency correction, if you stay with the same latency. It's a trick to record with low latencies, less effects, playing not all tracks = less DSP load and to mix with higher latencies, when all tracks and effects are needed. You shouldn't try to do this with Qtractor, at least not with the versions I used. -- ubuntu-studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
