looks like now is working well, should be that change of buttons on the interface, now i used the one on the right and starts by itself working well, without start in jackd in terminal. To be honest never noticed that button before..
Thank you very much, JB PS- i will make several trials and if still working good i will put as solved. On Wed, Mar 30, 2016 at 3:44 PM, Joao Bruno <[email protected]> wrote: > Ok, I will do it. Just to be more precise, QjackCtl only works after I > run jackd from terminal and after run a software, I'm using ardour, if I > run QjackCtl before open ardour it fails and send me the usual failure > message. > On 30 Mar 2016 5:36 p.m., "Kaj Ailomaa" <[email protected]> wrote: > >> On Wed, Mar 30, 2016, at 04:33 PM, Kaj Ailomaa wrote: >> > On Wed, Mar 30, 2016, at 04:10 PM, Joao Bruno wrote: >> > > In this case I put default, but I also did it with the both devices >> that >> > > appears, hw:0 or plughw:0, doesn't work as well. At this moment I >> started >> > > jackd by the terminal and after opened the QjackCtl and looks like is >> > > working correctly, with the settings as default. >> > > >> > > Thank you, it was by your advice that jackd was working by terminal >> that >> > > I >> > > did this way, at least is working, not by the regular way but is >> > > working. >> > > >> > > Thank you very much, JB >> > > >> > default means hw:0. Better to choose the correct device in "Interface", >> > rather than default. Why? Because each time you boot your computer, the >> > device may be in a different order. >> > >> > Again, under "Interface", select the correct device, the start jack. >> >> btw, there are two buttons next to "Interface". Confusing, I know. It is >> the one to the right you should use, no the one to the left. >> >> -- >> ubuntu-studio-users mailing list >> [email protected] >> Modify settings or unsubscribe at: >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users >> >
-- ubuntu-studio-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users
