The Ubuntu Studio team is pleased to announce the beta release of Ubuntu
Studio 22.10, codenamed “Kinetic Kudu”.

While this beta is reasonably free of any showstopper installer bugs, you
may find some bugs within. This image is, however, mostly representative of
what you will find when Ubuntu Studio 22.10 is released on October 20, 2022.
Special notes:

The Ubuntu Studio 22.10 LTS disk image (ISO) exceeds 4 GB and cannot be
downloaded to some file systems such as FAT32, and may not be readable when
burned to a DVD. For this reason, we recommend downloading to a compatible
file system. When creating a boot medium, we recommend creating a bootable
USB stick
<https://ubuntu.com/tutorials/create-a-usb-stick-on-ubuntu#1-overview> with
the ISO image, or burning to a Dual-Layer DVD.

Images can be obtained from this link:
https://cdimage.ubuntu.com/ubuntustudio/releases/22.10/beta/

Full updated information, including Upgrade Instructions, are available in
the Release Notes
<https://ubuntustudio.org/ubuntu-studio-22-10-release-notes/>.
<https://wiki.ubuntu.com/GroovyGorilla/Beta/UbuntuStudio>
Regarding Pipewire

One of our goals this release was to create some kind of switch between our
traditional PulseAudio/JACK setup and Pipewire, but this did not come to
fruition as we had quite a few other bugs to squash as a result of the
transition to ffmpeg 5. Additionally, we had a lot of clean-up after the
transition to Python 3.10 in 22.04 LTS among other bugs. Sadly, that’s
where our attention went and Pipewire support had to be deprioritized for
this release.
New Features This Release

   - Ubuntu Studio Installer now includes Ubuntu Studio Feature Uninstaller to
   remove features of Ubuntu Studio that you don’t need. This is a
   long-requested feature that will be detailed in the official release
   announcement when Ubuntu Studio 22.10 releases on October 20th.
   - Q Light Controller Plus version 4.12.5
   - Freeshow version 0.5.6
   - openLP version 2.9.5

Major Package Upgrades

   - Darktable version 4.0.0
   - OBS Studio version 28.0.1
   - Audacity version 3.1.3
   - digiKam version 8.0.0 development snapshot (pre-release, see notes
   below)
   - Kdenlive version 22.08.1
   - Krita version 5.1.1

There are many other improvements, too numerous to list here. We encourage
you to take a look around the freely-downloadable ISO image.
Known Issues

   - digiKam is a development snapshot of 8.0.0. As such, it likely has
   undocumented bugs. We hope these bugs get ironed out by the time 8.0.0 beta
   comes out, but we are not sure when that will be as the digiKam developers
   have not released a timeline or release date. When the 8.0.0 beta or stable
   release of digiKam becomes available, we hope to provide these to you as
   Stable Release Updates. This came from the transition to ffmpeg 5 as prior
   versions of digiKam do not support ffmpeg 5. If you would like a stable
   version of digiKam now, a snap of 7.8.0 is available
   <https://snapcraft.io/digikam>.

Official Ubuntu Studio release notes can be found at
https://ubuntustudio.org/ubuntu-studio-22-10-release-notes/

Further known issues, mostly pertaining to the desktop environment, can be
found at https://wiki.ubuntu.com/KineticKudu/ReleaseNotes/Kubuntu

Additionally, the main Ubuntu release notes contain more generic issues:
https://discourse.ubuntu.com/t/kinetic-kudu-release-notes/27976
Frequently Asked Questions

Q: Does KDE Plasma use more resources than your former desktop environment
(Xfce)?
A: In our testing, the increase in resource usage is negligible, and our
optimizations were never tied to the desktop environment.

Q: Does Ubuntu Studio contain snaps?
A: Yes. Mozilla’s distribution agreement with Canonical changed, and Ubuntu
was forced to no-longer distribute Firefox in a native .deb package. We
have found that, after numerous improvements, Firefox now performs just as
well as the native .deb package did.

Additionally, Audacity 2.4.2, due to incompatibilities with ffmpeg 5, had
to be removed from the official Ubuntu repositories this cycle. For that
reason, we worked hard with the snap packager to include it in Ubuntu
Studio 22.10. Therefore, Audacity 3.1.3 is included as a snap. Watch this
bug <https://bugs.launchpad.net/ubuntu/+source/audacity/+bug/1991252> to
track Audacity’s reintroduction into the Ubuntu repositories. Right now, it
is on-pace to happen before the release of Ubuntu 22.10. When this happens,
we fully intend to drop the snap and re-include the .deb package in Ubuntu
Studio. Watch Ubuntu Studio News <https://ubuntustudio.org/news> for
updates.

Finally, Freeshow is an Electron-based application. Electron-based
applications cannot be packaged in the Ubuntu repositories in that they
cannot be packaged in a traditional Debian source package. While such apps
do have a build system to create a .deb binary package, it circumvents the
source package build system in Launchpad, which is required when packaging
for Ubuntu. However, Electron apps also have a facility for creating snaps,
which can be uploaded included. Therefore, for Freeshow to be included in
Ubuntu Studio, it had to be packaged as a snap.

Q: If I install this Beta release, will I have to reinstall when the final
release comes out?
A: No. If you keep it updated, your installation will automatically become
the final release. However, if Audacity returns to the Ubuntu repositories
before final release, then you might end-up with a double-installation of
Audacity. Removal instructions of one or the other will be made available
in a future post.

Q: Will you make an ISO with {my favorite desktop environment}?
A: To do so would require creating an entirely new flavor of Ubuntu, which
would require going through the Official Ubuntu Flavor application process.
Since we’re completely volunteer-run, we don’t have the time or resources
to do this. Instead, we recommend you download the official flavor for the
desktop environment of your choice <https://ubuntu.com/download/flavours> and
use Ubuntu Studio Installer
<https://ubuntustudio.org/ubuntu-studio-installer> to get Ubuntu Studio.

Q: What if I don’t want all of these packages installed on my machine?
A: Simply use the Ubuntu Studio Feature Uninstaller to remove the features
of Ubuntu Studio you don’t want or need!
Please Test!
-- 
ubuntu-studio-users mailing list
ubuntu-studio-users@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users

Reply via email to