Mohit Tokas, thank you for reporting this and helping make Ubuntu
better.

In order to allow additional upstream developers to examine the issue, at your 
earliest convenience, could you please test the latest upstream kernel 
available from http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D ? Please 
keep in mind the following:
1) The one to test is at the very top line at the top of the page (not the 
daily folder).
2) The release names are irrelevant.
3) The folder time stamps aren't indicative of when the kernel actually was 
released upstream.
4) Install instructions are available at 
https://wiki.ubuntu.com/Kernel/MainlineBuilds .

If testing on your main install would be inconvenient, one may:
1) Install Ubuntu to a different partition and then test this there.
2) Backup, or clone the primary install.

If the latest kernel did not allow you to test to the issue (ex. you couldn't 
boot into the OS) please make a comment in your report about this, and continue 
to test the next most recent kernel version until you can test to the issue. 
Once you've tested the upstream kernel, please comment on which kernel version 
specifically you tested. If this issue is fixed in the mainline kernel, please 
add the following tags by clicking on the yellow circle with a black pencil 
icon, next to the word Tags, located at the bottom of the report description:
kernel-fixed-upstream
kernel-fixed-upstream-X.Y-rcZ

Where X, and Y are the first two numbers of the kernel version, and Z is
the release candidate number if it exists.

If the mainline kernel does not fix the issue, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-X.Y-rcZ

Please note, an error to install the kernel does not fit the criteria of
kernel-bug-exists-upstream.

Also, you don't need to apport-collect further unless specifically
requested to do so.

It is most helpful that after testing of the latest upstream kernel is
complete, you mark this report Status Confirmed.

Lastly, to keep this issue relevant to upstream, please continue to test
the latest mainline kernel as it becomes available.

Thank you for your help.

** Tags added: latest-bios-0100

** Description changed:

- Output of "lsb_release -rd" :
- 
- Description:  Ubuntu Xenial Xerus (development branch)
- Release:      16.04
- 
- Output of "apt-cache policy xorg" :
- 
- xorg:
-   Installed: 1:7.7+13ubuntu3
-   Candidate: 1:7.7+13ubuntu3
-   Version table:
-  *** 1:7.7+13ubuntu3 500
-         500 http://in.archive.ubuntu.com/ubuntu xenial/main amd64 Packages
-         100 /var/lib/dpkg/status
- 
  Q. What I expected to happen?
  A. The mouse would run smoothly as it does run in windows.
  
  Q. What happened instead?
  A. The mouse lags moves choppy/doesn't update its position as it should
  
- Additional Information :
- 
+ Additional Information:
  Output of "xinput --list --short"
  
  ⎡ Virtual core pointer                        id=2    [master pointer  (3)]
  ⎜   ↳ Virtual core XTEST pointer                      id=4    [slave  pointer 
 (2)]
  ⎜   ↳ E-Signal USB Gaming Mouse                       id=10   [slave  pointer 
 (2)]
  ⎜   ↳ E-Signal USB Gaming Mouse                       id=11   [slave  pointer 
 (2)]
  ⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
-     ↳ Virtual core XTEST keyboard                     id=5    [slave  
keyboard (3)]
-     ↳ Power Button                                    id=6    [slave  
keyboard (3)]
-     ↳ Video Bus                                       id=7    [slave  
keyboard (3)]
-     ↳ Power Button                                    id=8    [slave  
keyboard (3)]
-     ↳ Microsoft® LifeCam HD-3000              id=9    [slave  keyboard (3)]
-     ↳ AT Translated Set 2 keyboard                    id=12   [slave  
keyboard (3)]
+     ↳ Virtual core XTEST keyboard                     id=5    [slave  
keyboard (3)]
+     ↳ Power Button                                    id=6    [slave  
keyboard (3)]
+     ↳ Video Bus                                       id=7    [slave  
keyboard (3)]
+     ↳ Power Button                                    id=8    [slave  
keyboard (3)]
+     ↳ Microsoft® LifeCam HD-3000              id=9    [slave  keyboard (3)]
+     ↳ AT Translated Set 2 keyboard                    id=12   [slave  
keyboard (3)]
  
  Output of "xinput --list-props 11"
  
  Device 'E-Signal USB Gaming Mouse':
-       Device Enabled (133):   1
-       Coordinate Transformation Matrix (135): 1.000000, 0.000000, 0.000000, 
0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
-       Device Accel Profile (259):     0
-       Device Accel Constant Deceleration (260):       1.000000
-       Device Accel Adaptive Deceleration (261):       1.000000
-       Device Accel Velocity Scaling (262):    10.000000
-       Device Product ID (251):        1241, 41132
-       Device Node (252):      "/dev/input/event4"
-       Evdev Axis Inversion (263):     0, 0
-       Evdev Axes Swap (265):  0
-       Axis Labels (266):      "Rel X" (143), "Rel Y" (144), "Rel Horiz Wheel" 
(257), "Rel Vert Wheel" (258)
-       Button Labels (267):    "Button Left" (136), "Button Middle" (137), 
"Button Right" (138), "Button Wheel Up" (139), "Button Wheel Down" (140), 
"Button Horiz Wheel Left" (141), "Button Horiz Wheel Right" (142), "Button 
Side" (255), "Button Extra" (256), "Button Unknown" (254), "Button Unknown" 
(254), "Button Unknown" (254), "Button Unknown" (254)
-       Evdev Scrolling Distance (268): 1, 1, 1
-       Evdev Middle Button Emulation (269):    0
-       Evdev Middle Button Timeout (270):      50
-       Evdev Third Button Emulation (271):     0
-       Evdev Third Button Emulation Timeout (272):     1000
-       Evdev Third Button Emulation Button (273):      3
-       Evdev Third Button Emulation Threshold (274):   20
-       Evdev Wheel Emulation (275):    0
-       Evdev Wheel Emulation Axes (276):       0, 0, 4, 5
-       Evdev Wheel Emulation Inertia (277):    10
-       Evdev Wheel Emulation Timeout (278):    200
-       Evdev Wheel Emulation Button (279):     4
-       Evdev Drag Lock Buttons (280):  0
+  Device Enabled (133):        1
+  Coordinate Transformation Matrix (135):      1.000000, 0.000000, 0.000000, 
0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
+  Device Accel Profile (259):  0
+  Device Accel Constant Deceleration (260):    1.000000
+  Device Accel Adaptive Deceleration (261):    1.000000
+  Device Accel Velocity Scaling (262): 10.000000
+  Device Product ID (251):     1241, 41132
+  Device Node (252):   "/dev/input/event4"
+  Evdev Axis Inversion (263):  0, 0
+  Evdev Axes Swap (265):       0
+  Axis Labels (266):   "Rel X" (143), "Rel Y" (144), "Rel Horiz Wheel" (257), 
"Rel Vert Wheel" (258)
+  Button Labels (267): "Button Left" (136), "Button Middle" (137), "Button 
Right" (138), "Button Wheel Up" (139), "Button Wheel Down" (140), "Button Horiz 
Wheel Left" (141), "Button Horiz Wheel Right" (142), "Button Side" (255), 
"Button Extra" (256), "Button Unknown" (254), "Button Unknown" (254), "Button 
Unknown" (254), "Button Unknown" (254)
+  Evdev Scrolling Distance (268):      1, 1, 1
+  Evdev Middle Button Emulation (269): 0
+  Evdev Middle Button Timeout (270):   50
+  Evdev Third Button Emulation (271):  0
+  Evdev Third Button Emulation Timeout (272):  1000
+  Evdev Third Button Emulation Button (273):   3
+  Evdev Third Button Emulation Threshold (274):        20
+  Evdev Wheel Emulation (275): 0
+  Evdev Wheel Emulation Axes (276):    0, 0, 4, 5
+  Evdev Wheel Emulation Inertia (277): 10
+  Evdev Wheel Emulation Timeout (278): 200
+  Evdev Wheel Emulation Button (279):  4
+  Evdev Drag Lock Buttons (280):       0
  
  Output of "lsusb"
  
  Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 006 Device 002: ID 0bc2:3321 Seagate RSS LLC 
+ Bus 006 Device 002: ID 0bc2:3321 Seagate RSS LLC
  Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 001 Device 005: ID 04d9:a0ac Holtek Semiconductor, Inc. 
+ Bus 001 Device 005: ID 04d9:a0ac Holtek Semiconductor, Inc.
  Bus 001 Device 003: ID 045e:0779 Microsoft Corp. LifeCam HD-3000
  Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  
  Note : Holtek Semiconductor, Inc. is my mouse
  
  Also found this in dmesg :
  
  [  292.597380] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
  [  293.941408] usb 1-1.4: New USB device found, idVendor=04d9, idProduct=a0ac
  [  293.941413] usb 1-1.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
  [  293.941416] usb 1-1.4: Product: USB Gaming Mouse
  [  293.941418] usb 1-1.4: Manufacturer: E-Signal
  [  294.241702] input: E-Signal USB Gaming Mouse as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:04D9:A0AC.0004/input/input16
  [  294.242160] hid-generic 0003:04D9:A0AC.0004: input,hidraw0: USB HID v1.10 
Mouse [E-Signal USB Gaming Mouse] on usb-0000:00:1a.0-1.4/input0
  [  294.841559] input: E-Signal USB Gaming Mouse as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:04D9:A0AC.0005/input/input17
  [  294.897825] hid-generic 0003:04D9:A0AC.0005: input,hiddev0,hidraw1: USB 
HID v1.10 Keyboard [E-Signal USB Gaming Mouse] on usb-0000:00:1a.0-1.4/input1
  [  295.241685] hid-generic 0003:04D9:A0AC.0006: hiddev0,hidraw2: USB HID 
v1.10 Device [E-Signal USB Gaming Mouse] on usb-0000:00:1a.0-1.4/input2
  
- Things that i have already tried :
+ Things that i have already tried:
  
  Set "Device Accel Constant Deceleration (260):1.000000" prop to greater
  values, makes the mouse go faster doesn't make it update its position
- quicker
+ quicker.
  
  Set usbhid mousepoll to 1 and 4 in /sys/module, doesn't make much of a
- difference
+ difference.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-10.25-generic 4.4.3
  Uname: Linux 4.4.0-10-generic x86_64
  .tmp.unity.support.test.0:
-  
+ 
  ApportVersion: 2.20-0ubuntu3
  Architecture: amd64
  BootLog:
-  [  OK  ] Started Network Manager.
-           Starting Network Manager Wait Online...
-  [  OK  ] Started LSB: Set the CPU Frequency Scaling governor to 
"ondemand".
+  [  OK  ] Started Network Manager.
+           Starting Network Manager Wait Online...
+  [  OK  ] Started LSB: Set the CPU Frequency Scaling governor to 
"ondemand".
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Sun Aug  7 15:49:08 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
-  Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0122] (rev 09) (prog-if 00 [VGA controller])
-    Subsystem: Intel Corporation 2nd Generation Core Processor Family 
Integrated Graphics Controller [8086:2040]
+  Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0122] (rev 09) (prog-if 00 [VGA controller])
+    Subsystem: Intel Corporation 2nd Generation Core Processor Family 
Integrated Graphics Controller [8086:2040]
  InstallationDate: Installed on 2016-03-12 (147 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160307)
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-10-generic.efi.signed 
root=UUID=f07625b5-4b5d-4d0a-a297-9a53679a2c03 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/17/2013
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: BHZ7710H.86A.0100.2013.0517.0942
  dmi.board.name: DZ77BH-55K
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAG39008-400
  dmi.chassis.type: 3
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrBHZ7710H.86A.0100.2013.0517.0942:bd05/17/2013:svn:pn:pvr:rvnIntelCorporation:rnDZ77BH-55K:rvrAAG39008-400:cvn:ct3:cvr:
  version.compiz: compiz 1:0.9.12.2+16.04.20160209-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.1.2-1ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.1.2-1ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.3-2ubuntu4
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.6.1-1ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160218-1ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.12-1build1
  xserver.bootTime: Sun Aug  7 21:03:28 2016
  xserver.configfile: default
  xserver.errors: systemd-logind: failed to get session: PID 839 does not 
belong to any known session
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
-  
+ 
  xserver.version: 2:1.17.3-2ubuntu4

** Changed in: xorg (Ubuntu)
   Importance: Undecided => Medium

** Changed in: xorg (Ubuntu)
       Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1610666

Title:
  Mouse cursor moves choppy/doesn't update its position as it should

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1610666/+subscriptions

_______________________________________________
Mailing list: https://launchpad.net/~ubuntu-x-swat
Post to     : ubuntu-x-swat@lists.launchpad.net
Unsubscribe : https://launchpad.net/~ubuntu-x-swat
More help   : https://help.launchpad.net/ListHelp

Reply via email to