New question #77792 on Ubuntu: https://answers.launchpad.net/ubuntu/+question/77792
I have a Dell Poweredge 6600 server (quad Xeon, 16 gb ram, 12 160 gb disks in 2 arrays w/hotspares) The Poweredge 6600 has 2 USB 1.1 compliant ports (ugh!). I've installed an NEC based USB controller in the single PCI slot, but the system does not recognize it. Any suggestions? Thanks in advance! lsmod/lspci follows: ================================== lsmod Module Size Used by isofs 39716 1 udf 87588 0 crc_itu_t 10112 1 udf usb_storage 99392 2 vmnet 47684 11 parport_pc 40356 0 vsock 24952 0 vmci 58196 2 vsock vmmon 77040 9 binfmt_misc 16776 1 ppdev 15492 0 bnep 20224 0 ipt_MASQUERADE 10752 1 iptable_nat 13700 1 nf_nat 25876 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 21388 4 iptable_nat,nf_nat nf_defrag_ipv4 9984 1 nf_conntrack_ipv4 xt_state 10112 1 nf_conntrack 72008 5 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state ipt_REJECT 11136 2 xt_tcpudp 11008 4 iptable_filter 10752 1 ip_tables 19472 2 iptable_nat,iptable_filter x_tables 23044 6 ipt_MASQUERADE,iptable_nat,xt_state,ipt_REJECT,xt_tcpudp,ip_tables bridge 56212 0 stp 10500 1 bridge input_polldev 11784 0 video 25360 0 output 11008 1 video lp 17156 0 parport 42220 3 parport_pc,ppdev,lp cfi_probe 11520 0 gen_probe 11264 1 cfi_probe cfi_util 13696 1 cfi_probe scb2_flash 11532 0 mtd 23048 1 scb2_flash chipreg 11012 2 cfi_probe,scb2_flash map_funcs 9984 1 scb2_flash dcdbas 15396 0 pcspkr 10496 0 i2c_piix4 18576 0 shpchp 40340 0 sworks_agp 15520 0 agpgart 42696 1 sworks_agp usbhid 42464 0 qla1280 124940 0 megaraid_mbox 39696 3 megaraid_mm 17180 4 megaraid_mbox tg3 131460 0 aic7xxx 134488 0 scsi_transport_spi 29824 1 aic7xxx floppy 64196 1 fbcon 45856 0 tileblit 10752 1 fbcon font 16384 1 fbcon bitblit 13696 1 fbcon softcursor 9984 1 bitblit ================================== lspci 00:00.0 Host bridge: Broadcom CMIC-HE (rev 22) 00:00.1 Host bridge: Broadcom CMIC-HE 00:00.2 Host bridge: Broadcom CMIC-HE 00:00.3 Host bridge: Broadcom CMIC-HE 00:03.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev 02) 00:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93) 00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93) 00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05) 00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge 00:10.0 Host bridge: Broadcom CIOB30 (rev 03) 00:10.2 Host bridge: Broadcom CIOB30 (rev 03) 00:11.0 Host bridge: Broadcom CIOB30 (rev 03) 00:11.2 Host bridge: Broadcom CIOB30 (rev 03) 00:12.0 Host bridge: Broadcom CIOB30 (rev 03) 00:12.2 Host bridge: Broadcom CIOB30 (rev 03) 03:01.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) 04:00.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) 04:01.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06) 05:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20) 0a:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet (rev 14) 0a:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet (rev 14) ================================== -- You received this question notification because you are a member of UF Unanswered Posts Team, which is an answer contact for Ubuntu. _______________________________________________ Mailing list: https://launchpad.net/~ubuntuforums-unanswered Post to : [email protected] Unsubscribe : https://launchpad.net/~ubuntuforums-unanswered More help : https://help.launchpad.net/ListHelp
