answered just to move it above the spam
On 15 Dec, 20:43, JTF <[email protected]> wrote:
> Have you tried the ubuntu forums
>
> http://ubuntuforums.org/
>
> You are likely to find your answer there
>
> If you have IRC, try freenode.net channel #ubuntu
>
> On Dec 15, 3:34 pm, spennyb <[email protected]> wrote:
>
> > Hello all, Any ideas on this as I am completely confused :-/
>
> > Thanks in advance,
> > Spence.
>
> > On 12 Dec, 09:55, spennyb <[email protected]> wrote:
>
> > > Hello All, THanks in advance for any replies.
>
> > > I have just hadvirginmediabroadband installed which seems to work
> > > fine when booted into Vista and Opensolaris but not in Ubuntu 8.10.
>
> > > I am connected direct into a cable modem. eth0 gets an IP via dhcp and
> > > I can use nslookup and ftp from the command line which suggests all is
> > > ok. But I cant browse the web. every time I try to from firefox (No
> > > proxy setting) it just hangs and does not connect. It all works fine
> > > when connect to my wired work network.
>
> > > Works ok from Vista
> > > Works ok from Opensolaris
> > > Does not work From Ubuntu
> > > Does not work from Ubuntu live cd
> > > Ubunti works fine when connected to my work wired and wireless net.
>
> > > I also get framing errors as follows which I dont get when connected
> > > to my work net using Ubuntu or when booted in Opensolaris or Vista
> > > onVirginmedia...
>
> > > IP addresses removed but are correct address forVIrginmedia.
>
> > > spenc...@spencerb-laptop:~$ ifconfig
> > > eth0 Link encap:Ethernet HWaddr n.n.n.n.n.n.n
> > > inet addr:n.n.n.n Bcast:n.n.n.n Mask:255.255.252.0
> > > UP BROADCAST RUNNING MULTICAST MTU:150 Metric:1
> > > RX packets:12 errors:40 dropped:0 overruns:0 frame:40
> > > TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:1000
> > > RX bytes:1110 (1.1 KB) TX bytes:2974 (2.9 KB)
> > > Interrupt:17
>
> > > lo Link encap:Local Loopback
> > > inet addr:127.0.0.1 Mask:255.0.0.0
> > > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > > RX packets:242 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:242 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:0
> > > RX bytes:15140 (15.1 KB) TX bytes:15140 (15.1 KB)
>
> > > Routing table is as follows...
>
> > > spenc...@spencerb-laptop:~$ netstat -rn
> > > Kernel IP routing table
> > > Destination Gateway Genmask Flags MSS Window irtt Iface
> > > n.n.n.n.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0
> > > n.n.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
> > > 0.0.0.0 n.n.n.1 0.0.0.0 UG 0 0 0 eth0
> > > spenc...@spencerb-laptop:~$ netstat -r
> > > Kernel IP routing table
> > > Destination Gateway Genmask Flags MSS Window irtt Iface
> > > n.n.n.0 * 255.255.252.0 U 0 0 0 eth0
> > > link-local * 255.255.0.0 U 0 0 0 eth0
> > > default cpc1-rdng4-0-0- 0.0.0.0 UG 0 0 0 eth0
>
> > > nslookup......
>
> > > spenc...@spencerb-laptop:~$ nslookup> google.co.uk
>
> > > Server: 194.168.4.100
> > > Address: 194.168.4.100#53
>
> > > Non-authoritative answer:
> > > Name: google.co.uk
> > > Address: 72.14.221.104
> > > Name: google.co.uk
> > > Address: 66.249.93.104
> > > Name: google.co.uk
> > > Address: 216.239.59.104
>
> > > ftp....
>
> > > Connected
> > > 220 ** Welcome to FTP site **
> > > Name (spencerb):
> > > Login failed.
> > > ftp> quit
> > > 221 Goodbye.
>
> > > For instance, when I browse...
>
> > > Before...
>
> > > spenc...@spencerb-laptop:~$ ifconfig
> > > eth0 Link encap:Ethernet HWaddr n.n.n.n.n.n.n
> > > inet addr:n.n.n.n Bcast:n.n.n.255 Mask:255.255.252.0
> > > UP BROADCAST RUNNING MULTICAST MTU:150 Metric:1
> > > RX packets:24 errors:43 dropped:0 overruns:0 frame:43
> > > TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:1000
> > > RX bytes:2240 (2.2 KB) TX bytes:4708 (4.7 KB)
> > > Interrupt:17
>
> > > After...
>
> > > spenc...@spencerb-laptop:~$ start up f fox
> > > start: Need to be root
> > > spenc...@spencerb-laptop:~$ ifconfig
> > > eth0 Link encap:Ethernet HWaddr n.n.n.n.n.n.n.n
> > > inet addr:n.n.n.n Bcast:n.n.n.255 Mask:255.255.252.0
> > > UP BROADCAST RUNNING MULTICAST MTU:150 Metric:1
> > > RX packets:36 errors:65 dropped:0 overruns:0 frame:65
> > > TX packets:63 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:1000
> > > RX bytes:3241 (3.2 KB) TX bytes:6271 (6.2 KB)
> > > Interrupt:17
>
> > > my config...
>
> > > Dell XPS M1330
> > > Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
> > > 3GB RAM
> > > 250GB HDD
> > > nVidia Corporation GeForce 8400M
> > > Intel Corporation PRO/Wireless 3945ABG
> > > Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express
>
> > > I know its not a MAC addr issue as its the same H/W and the OS is the
> > > same on all OS's i.e the OS is not doing anything weird with it.
>
> > > From tcpdump/wireshark I see the following....
>
> > > Frame 10 (114 bytes on wire, 96 bytes captured)
> > > Ethernet II, Src: Dell, Dst: Cisco
> > > Transmission Control Protocol, Src Port: 37110 (37110), Dst Port: http
> > > (80), Seq: 393, Ack: 1, Len: 48
> > > Hypertext Transfer Protocol
> > > [Packet size limited during capture: HTTP truncated]
>
> > > Frame 11 (66 bytes on wire, 66 bytes captured)
> > > Ethernet II, Src: Cisco, Dst: Dell
> > > Transmission Control Protocol, Src Port: http (80), Dst Port: 37110
> > > (37110), Seq: 1, Ack: 393, Len: 0
>
> > > Frame 12 (114 bytes on wire, 96 bytes captured)
> > > Ethernet II, Src: Dell, Dst: Cisco
> > > Transmission Control Protocol, Src Port: 37110 (37110), Dst Port: http
> > > (80), Seq: 393, Ack: 1, Len: 48
> > > Hypertext Transfer Protocol
> > > [Packet size limited during capture: HTTP truncated]
>
> > > Frame 13 (66 bytes on wire, 66 bytes captured)
> > > Ethernet II, Src: Cisco, Dst: Dell
> > > Transmission Control Protocol, Src Port: http (80), Dst Port: 37110
> > > (37110), Seq: 977, Ack: 441, Len: 0
>
> > > Any help is appreciated.
> > > Thanks in advance,
> > > Spence.
> > > Last edited by spennyb; 1 Day Ago at 09:13 AM..
> > > spennyb is offline Reply With Quote
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Ubuntu Linux" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/ubuntulinux?hl=en
-~----------~----~----~----~------~----~------~--~---
