Hi, FYR "The EABI includes thumb interworking, which means that 16-bit Thumb and normal 32-bit ARM instructions can be mixed at function-level granularity. With current gcc this requires at least an armv4t core, because it uses the BX instruction which does not exist in armv4 or earlier." --- from debian-eabi-arm
I think it's ok. On 5/30/07, Daniel Smolik <[EMAIL PROTECTED]> wrote: > Tzungder Lin napsal(a): > > Hi, what's your ARM version? > > EABI will use BX, BLX instructions which only be supported in ARMv4t > > and the later versions. > > FYR > Hi, > this is my /proc/cpuinfo > > Processor : ARM920T rev 0 (v4l) > > BogoMIPS : 49.86 > > Features : swp half thumb > > CPU implementer : 0x41 > > CPU architecture: 4T > > CPU variant : 0x1 > > CPU part : 0x920 > > CPU revision : 0 > > Cache type : write-back > > Cache clean : cp15 c7 ops > > Cache lockdown : format A > > Cache format : Harvard > > I size : 16384 > > I assoc : 64 > > I line length : 32 > > I sets : 8 > > D size : 16384 > > D assoc : 64 > > D line length : 32 > > D sets : 8 > > Is it OK for EABI ? > > Dan > > > > > > > > > On 5/29/07, Daniel Smolik <[EMAIL PROTECTED]> wrote: > >> Fernando Rodriguez napsal(a): > >> > Have you got EABI support built in the kernel? > >> > > >> > Fernando > >> > > >> > Daniel Smolik wrote: > >> >> Hi, > >> >> have anybody working uClibc with 2.6 kernel on ARM with EABI? > >> >> I compile buildroot with EABI support but when kenel boots I only see > >> >> Freeing unused kernel memory and it's all. When I compile buildroot > >> and > >> >> uClibc with OABI (and apply my ugly hack to _NR_syscall) all works. > >> >> I compile static version of busybox and boot to EABI root all command > >> >> crash with Illegal instruction. > >> >> > >> >> > >> >> Dan > >> >> > >> > >> Yes I have, I try disable/enable Maverick Crunch support and still the > >> same. > >> > >> Dan > >> _______________________________________________ > >> uClibc mailing list > >> [email protected] > >> http://busybox.net/cgi-bin/mailman/listinfo/uclibc > >> > > > -- > Mydatex s r.o. > http://www.mydatex.cz > email: [EMAIL PROTECTED] > mob: 604200362 > tel: 226210085 > _______________________________________________ uClibc mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/uclibc
