Denys Vlasenko wrote: > On Tuesday 03 June 2008 09:46, Carmelo AMOROSO wrote: > >>> I successfully built bfin-linux-uclibc toolchain >>> (binutils+gcc) using binutils and gcc trees from >>> svn://firewall-sources.blackfin.uclinux.org:80/svn/toolchain/trunk >>> >>> I already had quite a few toolchains on my machine >>> and I have a preferred way to build one. >>> >>> Therefore I did not use canned scripts from svn >>> but followed my own procedure, as a more familiar one for me. >>> >>> Basically, it involves building cross-compiled binutils, >>> installing it, then building and installing gcc, >>> then doing the same for libc. >>> Trying to build gcc doesn't work, it needs usable $TARGET-ld. >>> >>> I observed the following peculiarity: binutils apparently >>> tried to build newlib, and that requires $TARGET-cc! >>> >>> >>> >>> >> Hi Denys, >> cross-binutils can be built from scratch without requiring any >> TARGET-xxx tools, >> while cross-gcc needs proper cross-binutils. >> So probably you are misconfiguring bintuils... os something strange is >> happening. >> I never had problem with this, and I don't use buildroot. >> > > Are you building blackfin toolchain(s) too? > Hi Denis, sorry for incomplete reply.. I use only sh4. > Can you let me know exact version of binutils you use, > Version:2.18.50.0.6 ../configure --target=sh4-linux-uclibc --prefix=/opt/STM/STLinux-2.3/devkit/sh4_uclibc --exec-prefix=/opt/STM/STLinux-2.3/devkit/sh4_uclibc --bindir=/opt/STM/STLinux-2.3/devkit/sh4_uclibc/bin --sbindir=/opt/STM/STLinux-2.3/devkit/sh4_uclibc/sbin --sysconfdir=/opt/STM/STLinux-2.3/devkit/sh4_uclibc/etc --datadir=/opt/STM/STLinux-2.3/devkit/sh4_uclibc/share --includedir= /opt/STM/STLinux-2.3/devkit/sh4_uclibc/include --libdir=/opt/STM/STLinux-2.3/devkit/sh4_uclibc/lib --libexecdir=/opt/STM/STL inux-2.3/devkit/sh4_uclibc/libexec --localstatedir=/opt/STM/STLinux-2.3/devkit/sh4_uclibc/var --sharedstatedir=/opt/STM/STLi nux-2.3/devkit/sh4_uclibc/share --mandir=/opt/STM/STLinux-2.3/devkit/sh4_uclibc/man --infodir=/opt/STM/STLinux-2.3/devkit/sh 4_uclibc/info --enable-nls --disable-multilib --program-prefix=sh4-linux-uclibc- --enable-install-libbfd --with-sysroot=/opt /STM/STLinux-2.3/devkit/sh4_uclibc/target
nothing special Carmelo > and also full configure command line which you use? > Do you set some special CFLAGS etc? > -- > vda > > _______________________________________________ uClibc mailing list [email protected] http://busybox.net/cgi-bin/mailman/listinfo/uclibc
