On Sat, 2010-11-13 at 18:35 +0100, Bernhard Reutner-Fischer wrote: > Hi, > > I think you sent this to the wrong list, try the buildroot ML. >
Thanks, will do! Since buildroot seemed supported from the same website, I didn't think to look for separate ML's. -Dan Engel > > > On 13 Nov 2010 16:02, "Dan Engel" <[email protected]> wrote: > > > > Hello, all. > > > > I'm trying to make buildroot for the arm7tdmi (toolchain only, no > > busybox, kernel, etc.) on a basic x86 system, and I get this after a > > while of building: > > > > LN include/sys/prctl.h > > LN include/sys/ptrace.h > > LN include/sys/timerfd.h > > LN include/sys/elf.h > > LN include/sys/io.h > > LN include/sys/procfs.h > > LN include/sys/ucontext.h > > LN include/sys/user.h > > AS lib/crt1.o > > make[1]: *** No rule to make target `lib/crti.o'. Stop. > > make[1]: Leaving directory > > `/mnt/local/arm_toolchain/build/buildroot-2010.08/output/toolchain/uClibc-0.9.31' > > make: *** > > [/mnt/local/arm_toolchain/build/buildroot-2010.08/output/toolchain/uClibc-0.9.31/.configured] > > Error 2 > > > > Has anyone seen this, or know what might be going on? > > > > Of course, this is only the last part of the output. If this is not > > a > > known issue with a known work-around, then I'll gladly send a > > follow-up > > post with the entire make output (along with the buildroot and > > uclibc > > configurations) attached. > > > > What additional information can I provide, that would help anyone > > willing to help me? > > > > Thanks, > > -Dan Engel > > > > > > > > _______________________________________________ > > uClibc mailing list > > [email protected] > > http://lists.busybox.net/mailman/listinfo/uclibc > _______________________________________________ uClibc mailing list [email protected] http://lists.busybox.net/mailman/listinfo/uclibc
