2015-02-23 17:06 GMT-08:00 Jean Lee <[email protected]>: > I tested the following environment with MIPS32, with CPU BCM7429(MIPS > r3000),
This is a BMIPS5000 CPU, fully compatible with the mips32r1 ISA, not a R3000-class MIPS processor per-se. > (1) > mipsel-linux-uclibc-gcc 4.5.3-2.4 (compiled by Broadcom) > binutils 2.19(GNU ld (GNU Binutils) 2.19.92.20091006) > uclibc 0.9.32-1 > Segment fault. > (2) > mipsel-linux-uclibc-gcc 4.5.3-2.4 (compiled by Broadcom) > binutils 2.19(GNU ld (GNU Binutils) 2.19.92.20091006) > uclibc 0.9.34 git master > Segment fault. As another data point, you might want to try a newer toolchain from Broadcom here: http://www.broadcom.com/support/stb/ > (3) > mipsel-linux-uclibc-gcc 4.8 (compiled by Broadcom) > binutils ? > uclibc ? > No .rel.plt segment. > (4) > mipsel-linux-uclibc-gcc 4.9 (compiled by me) > binutils 2.19(GNU ld (GNU Binutils) 2.19.92.20091006) > uclibc 0.9.32-1 > Segment fault. > (5) > mips android ndk toolchain > No .rel.plt segment. > > > Bernhard Reutner-Fischer <[email protected]>于2015年2月24日星期二写道： > >> On February 23, 2015 10:23:21 PM GMT+01:00, Andrew Bennett < >> [email protected]> wrote: >> >> Andrew, thanks for your reply. You are a mips engineer~ >> >> I have a following example for dlopen problem, which I tested a few >> >days ago, >> >> but I have no mips environment these days. Would you mind to test it >> >for me. Many thanks. >> > >> >Many thanks for the testcase I will give it a try. >> >> Which compiler and version do you use, which version of binutils and which >> MIPS ABI? >> >> Thanks, >> >> > _______________________________________________ > uClibc mailing list > [email protected] > http://lists.busybox.net/mailman/listinfo/uclibc -- Florian _______________________________________________ uClibc mailing list [email protected] http://lists.busybox.net/mailman/listinfo/uclibc
