Found it! We originally used a usbDemon, and then upgraded to a usb2Demon. I had to modify the original OCD file to work with the higher speed device. I don't know which device you have, so I am attaching both files.
Also, I have to use a relatively slow JTAG speed to get the device to communicate with the board. Try setting the speed to 4 or 5, and if it connects easily, bump it up to 2 or 3, until you start getting target communication errors. (Use the lowest number that connects without errors) It took me a long time to get the Macraigor configured, but since getting it running, we have been using the programmer successfully for over a year without complaints. Good luck! - Arnon ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Arnon Meydav Sent: Tuesday, February 13, 2007 11:05 To: uClinux development list Subject: RE: [uClinux-dev] Flash programming with Macraigor and IXP425MonteJade I had the same problem when we bought the Macgraigor programmer about a year ago. I ended up porting my own ocd file for the montejade [using help from a partner, who was a montejade veteran], and got it working nicely. Unfortunately, my desktop computer has since died, and the only copies of the ocd files are on a lab machine that does the actual programming. I will try to go down to the lab as soon as possible and copy it here to the list... - Arnon ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Siegfried M?ller Sent: Tuesday, February 13, 2007 10:25 To: [email protected] Subject: [uClinux-dev] Flash programming with Macraigor and IXP425 MonteJade Hi, does anyone has experience with the flash programmer from macraigor and the monte jade board?. I currently try to flash or upload from a flash, but it seems that i don't have the right adjustements for the flashprogrammer (.ocd file). I got error messages like bus target error and soon. I already tried the support from macraigor systems, but they are not able to help me for this problem, becaus they don't know the monte jade board (!?) I hope somebody has an tip for me. best regards Siegfried -- Disclaimer: -- This e-mail is intended solely for the person to whom it is addressed and may contain confidential or legally privileged information. Access to this e-mail by anyone else is unauthorized. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and destroy this e-mail and any attachments. E-mail may be susceptible to data corruption, interception, unauthorized amendment, viruses and delays or the consequences thereof. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this email is strictly prohibited. -- Disclaimer: -- This e-mail is intended solely for the person to whom it is addressed and may contain confidential or legally privileged information. Access to this e-mail by anyone else is unauthorized. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and destroy this e-mail and any attachments. E-mail may be susceptible to data corruption, interception, unauthorized amendment, viruses and delays or the consequences thereof. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this email is strictly prohibited.
xscale_montejade.OCD
Description: xscale_montejade.OCD
xscale_montejade_USB2.OCD
Description: xscale_montejade_USB2.OCD
_______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
