Dear all,
I have some trouble about the IXP400 using over IXDPG425(MonteJade). Would
someone like to point me how to find out what is going wrong?
The IXP400 can work properly when loading ixp400, ixp400_dsr and
ixp400_codelets_dspEng. But I try to use the demo program, something goes
wrong.
(1) The demoboard has four ports, but the demo program only initialize two
ports.
(2) The Connection can be eatablished but can't conversation anyway.
Please point me how to solve above trouble! Thanks a lot!
Best Regards,
Arron
The Target board booting information is listed as follow:
Uncompressing
Linux..........................................................................
done, booting the kernel.
Linux version 2.4.31-uc0 ([EMAIL PROTECTED]) (gcc version 3.3.2) #431 Fri Mar
30 13:47:44 CST 2007
CPU: XScale-IXP4xx/IXC11xx revision 1
Machine: Intel IXP425 Monte Jade Demonstration Platform
alloc_bootmem_low
memtable_init
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200 root=/dev/ram0 initrd=0x00800000,8M
[EMAIL PROTECTED]
Calibrating delay loop... 525.92 BogoMIPS
Memory: 32MB = 32MB total
Memory: 21724KB available (1879K code, 508K data, 72K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
PCI: reset bus...
PCI Autoconfig: Found Bus 0, Device 14, Function 0
PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x4bfff000
PCI Autoconfig: Found Bus 0, Device 14, Function 1
PCI Autoconfig: BAR 0, Mem, size=0x1000, address=0x4bffe000
PCI Autoconfig: Found Bus 0, Device 14, Function 2
PCI Autoconfig: BAR 0, Mem, size=0x100, address=0x4bffdf00
PCI: bus0: Fast back to back transfers disabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
ledman: Copyright (C) SnapGear, 2000-2003.
LED: registered ERASE switch on IRQ26
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 5.7.6-k1
Copyright (c) 1999-2004 Intel Corporation.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
RedBoot says flash is at 50000000, but it's actually at 0
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00080000 : "RedBoot"
0x00080000-0x00500000 : "ramdisk"
0x00500000-0x00600000 : "kernel"
0x00600000-0x00fe0000 : "jffs"
0x00fe0000-0x00fff000 : "FIS directory"
0x00fff000-0x01000000 : "RedBoot config"
CFI: Found no IXP425 Flash device at location zero
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:0e.2: NEC Corporation USB 2.0
ehci_hcd 00:0e.2: irq 23, pci mem 4bffdf00
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:0e.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 5 ports detected
host/usb-ohci.c: USB OHCI at membase 0x4bfff000, IRQ 23
host/usb-ohci.c: usb-00:0e.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
host/usb-ohci.c: USB OHCI at membase 0x4bffe000, IRQ 23
host/usb-ohci.c: usb-00:0e.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (11915 buckets, 95320 max) - 352 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.8 $ loaded
ip_nat_pptp version $Revision: 1.4 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 8192K
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Freeing init memory: 72K
Using /lib/modules/2.4.31-uc0/kernel/ixp425/ixp400-1.4/ixp400.o
Module init.
Using /lib/modules/2.4.31-uc0/kernel/ixp425/ixp400-1.4/ixp400_dsr.o
dspModule_init_module :: LOAD DSP MODULE...
Using /lib/modules/2.4.31-uc0/kernel/ixp425/ixp400-1.4/ixp400_codelets_dspEng.o
ixDspCodelet_init_module :: LOADED SUCCESSFULLY IXDSPCODELET MODULE ... (Call
demostart)
Welcome to
S n a p G e a r L i n u x
# IxDspCodeletApp
Please select telephone interface
1: Digital T1, 4 channels
2: Analog Narrow Band, 2 channels
3: Analog Wide Band, 2 channels
4: Analog Wide & Narrow Band, 1 + 1 channels
5: Analog Narrow Band, 4 channels
-> 5
Set country code (1:US, 81:Japan, 86:China) - 1
Initialising NPEs...
PHY 0 configuration:
PHY Status:
Link is Up
Auto Negotiation Completed
PHY Configuration:
Speed 100Mb/s
Full Duplex
Auto Negotiation Enabled
PHY 1 configuration:
PHY Status:
Link is Down
Auto Negotiation Not Completed
PHY Configuration:
Speed 10Mb/s
Half Duplex
Auto Negotiation Disabled
PHY 0 MAC address is: 00:13:8d:fe:fe:21
PHY 1 MAC address is: 00:13:8d:fe:fe:22
Rx Free pool has 100 buffers
Rtp successfully initialised.
DLcid 02060200-01
********************************************
* Intel IXP400 DSP Software *
* Release 2.6.2 *
* Nov 17 2004, 23:07:24 *
* Intel Corporation *
********************************************
-------- DSP Resource Configuration -------
Number of TDM terminations = 4
Number of IP terminations = 5
Number of Player = 5
Number of Mixers = 1
Number of ports per Mixer = 4
Country code = 1
-------------------------------------------
Initializing Slic's, please wait...
OSSL: Message queues createdmaxMsg = 64, maxSize = 192 in=4 out=3
----------------------------------------
- IxDspCodelet Demo Menu -
----------------------------------------
0 - Print Menu
1 - Channel Setup
2 - Channel Teardown
3 - Show Channel Parameters
4 - Show Resource Parameters
5 - Set a Parameter
6 - Caller ID Demo
7 - Gateway and Fax Bypass Demo
8 - 3-Way Call Demo
9 - Player Demo
10 - Diagnostic
11 - System Test CLI
12 - Exit
Please select test item - 7
1:G711_10ms u-Law
2:G711_10ms A-Law
3:G729a/b
4:G723.1
5:G722
6:G726 40Kbps
7:G726 32Kbps
8:G726 24Kbps
9:G726 16Kbps
Enter the coder type - 1
Fax mode (0:Disabled, 1:Fax Bypass, 2:T38) ? 0
Enable trace (0:no, 1:yes) ? 1
GW[1]: Reset channel parameters
GW[2]: Reset channel parameters
GW[1]: GOTO SETUP state
GW[1]: calling '222'...
GW[2]: SETUP msg received from '111'
GW[2]: GOTO RING state
GW[1]: ACCEPT msg received
GW[1]: GOTO WAIT ANS state
GW[2]: GOTO CONNECTED state
GW[1]: CONNECT received
GW[1]: GOTO CONNECTED state
GW[2]: GOTO IDLE state
GW[1]: DISCONNECT received
GW[1]: GOTO BUSY state
GW[1]: GOTO IDLE state_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
