Jivin goon863 lays it down ... > hi, > I am doing pptpd on bf537 board.While i add mppe in pppd and cross compile > the kernel,it has errors that "des.h can't be found" and some parameters > undefined in the file extra_crypto.c .So i search des.h in the kernel,but > only a blank des.h in kernel lib and another des.h in openswan. > I copy the openswan des.h to pppd and compile ok.But it seems that the pppd > dose not support mppe. > While connect to the server and disable crypto in windows xp,it connect > ok.But when enable crypto and try to connect,it shows error "619"in xp.
Have you enabled MPPE in the kernel ? Cheers, Davidm > here is my messages: > <7>Apr 19 14:44:47 pppd[56]: rcvd [CHAP Response id=0x1 > <714f9ff501a72254f00380d > <7>Apr 19 14:44:47 pppd[56]: sent [CHAP Success id=0x1 > "S=D4461080C9B55BF6CC7826 > <7>Apr 19 14:44:47 pppd[56]: sent [IPCP ConfReq id=0x1 <addr 192.168.1.126> > <com > <7>Apr 19 14:44:47 pppd[56]: sent [CCP ConfReq id=0x1] > <5>Apr 19 14:44:47 pppd[56]: MSCHAP-v2 peer authentication succeeded for > goon862 > <7>Apr 19 14:44:47 pppd[56]: rcvd [CCP ConfReq id=0x5 <mppe 1 0 0 e1] > <7>Apr 19 14:44:47 pppd[56]: sent [CCP ConfRej id=0x5 <mppe 1 0 0 40] > <7>Apr 19 14:44:47 pppd[56]: rcvd [IPCP ConfReq id=0x6 <addr 0.0.0.0> > <ms-dns1 0 > <7>Apr 19 14:44:47 pppd[56]: sent [IPCP ConfRej id=0x6 <ms-dns1 0.0.0.0> > <ms-win > <7>Apr 19 14:44:47 pppd[56]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>] > <7>Apr 19 14:44:47 pppd[56]: sent [IPCP ConfReq id=0x2 <addr 192.168.1.126>] > <7>Apr 19 14:44:47 pppd[56]: rcvd [CCP ConfNak id=0x1 <mppe 0 0 0 0] > <7>Apr 19 14:44:47 pppd[56]: sent [CCP ConfReq id=0x2] > <7>Apr 19 14:44:47 pppd[56]: rcvd [IPCP ConfReq id=0x7 <addr 0.0.0.0>] > <7>Apr 19 14:44:47 pppd[56]: sent [IPCP ConfNak id=0x7 <addr 192.168.1.20>] > <7>Apr 19 14:44:47 pppd[56]: rcvd [IPCP ConfAck id=0x2 <addr 192.168.1.126>] > <7>Apr 19 14:44:47 pppd[56]: rcvd [CCP ConfNak id=0x2 <mppe 0 0 0 0] > <7>Apr 19 14:44:47 pppd[56]: sent [CCP ConfReq id=0x3] > <7>Apr 19 14:44:47 pppd[56]: rcvd [IPCP ConfReq id=0x8 <addr 192.168.1.20>] > <7>Apr 19 14:44:47 pppd[56]: sent [IPCP ConfAck id=0x8 <addr 192.168.1.20>] > <6>Apr 19 14:44:47 pppd[56]: found interface eth0 for proxy arp > <5>Apr 19 14:44:47 pppd[56]: local IP address 192.168.1.126 > <5>Apr 19 14:44:47 pppd[56]: remote IP address 192.168.1.20 > <5>Apr 19 14:44:47 pppd[56]: remote IP address 192.168.1.20 > <7>Apr 19 14:44:47 pppd[56]: rcvd [CCP ConfNak id=0x3 <mppe 0 0 0 0] > <7>Apr 19 14:44:47 pppd[56]: sent [CCP ConfReq id=0x4] > <7>Apr 19 14:44:48 pppd[56]: rcvd [CCP ConfNak id=0x4 <mppe 0 0 0 0] > <7>Apr 19 14:44:48 pppd[56]: sent [CCP ConfReq id=0x5] > <7>Apr 19 14:44:48 pppd[56]: rcvd [CCP ConfNak id=0x5 <mppe 0 0 0 0] > <7>Apr 19 14:44:48 pppd[56]: sent [CCP ConfReq id=0x6] > <7>Apr 19 14:44:48 pppd[56]: rcvd [CCP ConfNak id=0x6 <mppe 0 0 0 0] > <7>Apr 19 14:44:48 pppd[56]: sent [CCP ConfReq id=0x7] > <7>Apr 19 14:44:48 pppd[56]: rcvd [CCP ConfNak id=0x7 <mppe 0 0 0 0] > <7>Apr 19 14:44:48 pppd[56]: sent [CCP ConfReq id=0x8] > <7>Apr 19 14:44:48 pppd[56]: rcvd [CCP ConfNak id=0x8 <mppe 0 0 0 0] > <7>Apr 19 14:44:48 pppd[56]: sent [CCP ConfReq id=0x9] > <7>Apr 19 14:44:48 pppd[56]: rcvd [CCP ConfNak id=0x9 <mppe 0 0 0 0] > <7>Apr 19 14:44:48 pppd[56]: sent [CCP ConfReq id=0xa] > <7>Apr 19 14:44:48 pppd[56]: rcvd [CCP ConfNak id=0xa <mppe 0 0 0 0] > <7>Apr 19 14:44:48 pppd[56]: sent [CCP ConfReq id=0xb] > cross compile my kernel as follow: > Cryptographic options > --- Cryptographic API > │ │ [*] HMAC support > │ │ <*> Null algorithms > │ │ <*> MD4 digest algorithm > │ │ <*> MD5 digest algorithm > │ │ <M> SHA1 digest algorithm > │ │ <*> SHA256 digest algorithm > │ │ <*> SHA384 and SHA512 digest algorithms > │ │ <*> Whirlpool digest algorithms > │ │ <*> Tiger digest algorithms > │ │ <*> DES and Triple DES EDE cipher algorithms > │ │ <*> Blowfish cipher algorithm > │ │ <*> Twofish cipher algorithm > │ │ <*> Serpent cipher algorithm > │ │ <*> AES cipher algorithms > │ │ <*> CAST5 (CAST-128) cipher algorithm > │ │ <*> CAST6 (CAST-256) cipher algorithm > │ │ <*> TEA, XTEA and XETA cipher algorithms > │ │ <M> ARC4 cipher algorithm > │ │ <*> Khazad cipher algorithm > │ │ <*> Anubis cipher algorithm > │ │ <*> Deflate compression algorithm > │ │ <*> Michael MIC keyed digest algorithm > │ │ <*> CRC32c CRC algorithm > │ │ < > Testing module > │ │ Hardware crypto devices ---> > Network device support > │ │ <*> PPP (point-to-point protocol) support > │ │ <*> PPP multilink support (EXPERIMENTAL) > │ │ <*> PPP filtering > │ │ <*> PPP support for async serial ports > │ │ <*> PPP support for sync tty ports > │ │ <*> PPP Deflate compression > │ │ <*> PPP BSD-Compress compression > │ │ <*> PPP MPPE compression (encryption) (EXPERIMENTAL) > │ │ <*> PPP over Ethernet (EXPERIMENTAL) > Network Applications > │ │ <*> portmap > │ │ <*> pppd > │ │ <*> enable MPPE > │ │ [ ] enable PPPOE > │ │ [ ] enable PPPOA > │ │ [ ] disable redirection of passwords starting > │ │ <*> pptpctrl > │ │ <*> pptpd > │ │ [ ] pptp > │ │ [ ] pptp_callmgr > Library Configuration > │ │ [ ] Build libAES > │ │ [*] Build libDES > │ │ [*] Build libSSL > │ │ [ ] Build libGMP > # root:~> lsmod > Module Size Used by > sha1 1868 0 - Live 0x02d42000 > arc4 1288 0 - Live 0x00312800 > ppp_mppe 5892 0 - Live 0x02d26000 > options.pptpd: > lock > debug > chap-secrets > name pptpd > auth > require-chap > proxyarp > +chapms-v2 > mppe-128 > mppe-stateless > pptpd.conf: > speed 115200 > stimeout 10 > localip 192.168.1.126-130 > remoteip 192.168.1.200-230 > will you please tell me how to solve the problem? > thanks very much! > _______________________________________________ > uClinux-dev mailing list > [email protected] > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev > This message was resent by [email protected] > To unsubscribe see: > http://mailman.uclinux.org/mailman/options/uclinux-dev -- David McCullough, [EMAIL PROTECTED], Ph:+61 734352815 Secure Computing - SnapGear http://www.uCdot.org http://www.cyberguard.com _______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
