Am Montag, den 04.06.2007, 09:06 +0800 schrieb Neil 林搏宇: > uClinux-dev，hi ^_^ > > Some problems in compiling. > I use uClinux-dist-20070130.tar.gz to make a 2.6.19 kernel for arm7 > S3C44B0X(no mmu). > The first three steps, "make lib_only", "make user_only", "make romfs", > all of them are OK. > But in "make" step, some problems I cannot overcome: > Different cross-compile toolchains I adpoted, differet errors happened. > > 1. When I used arm-linux-gcc (GCC) 3.4.4 to compile, some information came > from compilation: > neildebian:/home/neil/uClinux-dist# make > make -C tools/ucfront > make[1]: Entering directory `/home/neil/uClinux-dist/tools/ucfront' > make[1]: Nothing to be done for `all'. > make[1]: Leaving directory `/home/neil/uClinux-dist/tools/ucfront' > ln -sf /home/neil/uClinux-dist/tools/ucfront/ucfront tools/ucfront-gcc > ln -sf /home/neil/uClinux-dist/tools/ucfront/ucfront tools/ucfront-g++ > ln -sf /home/neil/uClinux-dist/tools/ucfront/ucfront-ld tools/ucfront-ld > make ARCH=arm CROSS_COMPILE=arm-linux- -j1 -C linux-2.6.x || exit 1 > make[1]: Entering directory `/home/neil/uClinux-dist/linux-2.6.x' > CHK include/linux/version.h > make[2]: `include/asm-arm/mach-types.h' is up to date. > CHK include/linux/utsrelease.h > CC arch/arm/kernel/asm-offsets.s > In file included from include/linux/spinlock.h:53, > from include/linux/capability.h:45, > from include/linux/sched.h:46, > from arch/arm/kernel/asm-offsets.c:13: > include/linux/kernel.h:10:20: stdarg.h: No such file or directory There's something wrong with your toolchain installation, stdarg.h is installed with the toolchain.
Regards, Erwin _______________________________________________ uClinux-dev mailing list [email protected] http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by [email protected] To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev
